Gettering effects by aluminum upon the dark and illuminated I-V characteristics of N+-P-P+ silicon solar cells

被引:13
|
作者
Santana, G
Morales-Acevedo, A [1 ]
Martel, A
Hernández, L
机构
[1] IPN, Ctr Invest & Estudios Avanzados, Dept Ingn Elect, Mexico City 07360, DF, Mexico
[2] Univ La Habana, Fac Fis, IMRE, La Habana 10400, Cuba
[3] CINVESTAV, Dept Fis, Mexico City 07000, DF, Mexico
关键词
aluminum gettering; silicon solar cells; I-V solar cells characteristics;
D O I
10.1016/S0927-0248(99)00158-0
中图分类号
TE [石油、天然气工业]; TK [能源与动力工程];
学科分类号
0807 ; 0820 ;
摘要
Impurity gettering is an essential process step in silicon solar cell technology. A widely used technique to enhance silicon solar cell performance is the deposition of an aluminum layer on the back surface of the cell, followed by a thermal annealing. The aluminum thermal treatment is typically done at temperatures around 600 degrees C for short times (10-30 min). Seeking a new approach of aluminum annealing at the back of silicon solar cells, a systematic study about the effect the above process has on dark and illuminated I-V cell characteristics is reported in this paper. We report results on silicon solar cells where annealing of aluminum was done at two different temperatures (600 degrees C and 800 degrees C), and compare the results for cells with and without aluminum alloying. We have shown that annealing of the aluminum in forming gas at temperatures around 800 degrees C causes improvement of the electrical cell characteristics. We have also made evident that for temperatures below similar to 250 K, the predominant recombination process for our cells is trap-assisted carrier tunneling for both annealing temperatures, but it is less accentuated for cells with annealing of aluminum at 800 degrees C, For temperatures above similar to 250 K, the recombination proceeds through Shockley-Read-Hall trap levels, for cells annealed at both temperatures. Furthermore, it seems from DLTS measurements that there is gettering of iron impurities introduced during the fabrication processes. The transport of impurities from the bulk to the back surface (alloyed with aluminum) reduces the dark current and increases the effective diffusion length as determined from dark I-V characteristics and from spectral response measurements, respectively. All these effects cause a global efficiency improvement for cells where aluminum is annealed at 800 degrees C as compared to conventional cells where the annealing was made at 600 degrees C. (C) 2000 Elsevier Science B.V. All rights reserved.
引用
收藏
页码:369 / 378
页数:10
相关论文
共 50 条
  • [41] Impacts of phosphorus and aluminum gettering with porous silicon damage for p-type Czochralski silicon used in solar cells technology
    Ben Jaballah, A.
    Hassen, M.
    Rahmouni, H.
    Hajji, A.
    Selmi, A.
    Ezzaouia, H.
    THIN SOLID FILMS, 2006, 511 : 377 - 380
  • [42] Correlated Nonideal Effects of Dark and Light I-V Characteristics in a-Si/c-Si Heterojunction Solar Cells
    Chavali, Raghu Vamsi Krishna
    Wilcox, John Robert
    Ray, Biswajit
    Gray, Jeffery Lynn
    Alam, Muhammad Ashraful
    IEEE JOURNAL OF PHOTOVOLTAICS, 2014, 4 (03): : 763 - 771
  • [43] Relationships between processing conditions, morphology, and I-V characteristics in P3HT:PCBM solar cells
    Nasiri, M.
    Abbasi, F.
    JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS, 2015, 26 (04) : 2639 - 2646
  • [44] Determination of Commercial Silicon Diode (4007IN) Parameters from the I-V and P-V Characteristics
    Belgacem, Chokri Hadj
    SILICON, 2018, 10 (04) : 1469 - 1474
  • [45] Optimization of n/i and i/p buffer layers in n-i-p hydrogenated microcrystalline silicon solar cells
    袁育杰
    侯国付
    张建军
    薛俊明
    曹丽冉
    赵颖
    耿新华
    半导体学报, 2009, 30 (03) : 67 - 71
  • [46] Optimization of n/i and i/p buffer layers in n-i-p hydrogenated microcrystalline silicon solar cells
    Yuan Yujie
    Hou Guofu
    Zhang Jianjun
    Xue Junming
    Cao Liran
    Zhao Ying
    Geng Xinhua
    JOURNAL OF SEMICONDUCTORS, 2009, 30 (03)
  • [47] Numerical simulation and analysis of the dark and illuminated J-V characteristics of a-Si-H p-i-n diodes
    Meftah, A. M.
    Meftah, A. F.
    Merazga, A.
    JOURNAL OF PHYSICS-CONDENSED MATTER, 2006, 18 (23) : 5459 - 5471
  • [48] I-V CHARACTERISTICS OF POLYCRYSTALLINE SILICON WITH n + pn + STRUCTURE.
    Saito, Yoji
    Okada, Taisuke
    Okamura, Kazuhisa
    Kuwano, Hiroshi
    Journal of Applied Physics, 1985, 57 (04): : 1190 - 1193
  • [49] Temperature Dependence of I-V Characteristics for CNT Based p-i-n TFET and n-i-n MOSFET
    Shirazi, Shaahin G.
    Karimi, Gholamreza
    Mirzakuchaki, Sattar
    ECS JOURNAL OF SOLID STATE SCIENCE AND TECHNOLOGY, 2016, 5 (06) : M44 - M50
  • [50] Mechanisms of formation of N-S transition in nonisothermal I-V characteristics of a p-i-n diode
    Gorbatyuk, A. V.
    Serkov, F. B.
    SEMICONDUCTORS, 2009, 43 (09) : 1198 - 1204