Microstructure stability of Ti2AlN/Ti-48Al-2Cr-2Nb composite at 900 °C

被引:13
|
作者
Liu, Yi-wen [1 ]
Hu, Rui [1 ]
Zhang, Tie-bang [1 ]
机构
[1] Northwestern Polytech Univ, State Key Lab Solidificat Proc, Xian 710072, Peoples R China
关键词
TiAl composite; Ti2AlN; microstructure stability; lamellar structure; precipitation; LAMELLAR TIAL ALLOYS; THERMAL-STABILITY; MECHANICAL-PROPERTIES; NITROGEN; BEHAVIOR; CRYSTALS; EXPOSURE; STRESS; DESIGN; CARBON;
D O I
10.1016/S1003-6326(16)64095-5
中图分类号
TF [冶金工业];
学科分类号
0806 ;
摘要
Microstructure stability of in situ synthesized Ti2AlN/Ti-48Al-2Cr-2Nb composite during aging at 900 degrees C was investigated by XRD, OM and TEM, and the unreinforced Ti-48Al-2Cr-2Nb alloy was also examined for comparison. The result showed that in the TiAl alloy, a(2) lamellae thinned and were broken down, and became discontinuous with increasing aging time. The decomposition of a(2) lamella to gamma which was characterized by parallel decomposition and breakdown of a(2) lamellae led to the degradation of the lamellar structure. While in the composite, lamellar structure remained relatively stable even after aging at 900 degrees C for 100 h. No breakdown of a(2) lamellae except parallel decomposition and precipitation of fine nitride particles was observed. The better microstructural stability of the composite was mainly attributed to the precipitation of Ti2AlN particles at the a(2)/gamma interface which played an important role in retarding the coarsening of lamellar microstructure in the matrix of composite.
引用
收藏
页码:423 / 430
页数:8
相关论文
共 50 条
  • [41] Grain-size control in Ti-48Al-2Cr-2Nb with yttrium additions
    Trivedi, PB
    Baburaj, EG
    Genç, A
    Ovecoglu, L
    Patankar, SN
    Froes, FH
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2002, 33 (08): : 2729 - 2736
  • [42] Tensile properties and fracture behavior of in-situ synthesized Ti2AlN/Ti48Al2Cr2Nb composites at room and elevated temperatures
    Liu, Yiwen
    Hu, Rui
    Yang, Jieren
    Li, Jinshan
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2017, 679 : 7 - 13
  • [43] Brazing of Ti-48Al-2Cr-2Nb and TiC/Ti matrix composite using Ag-28Cu filler alloy
    Zhu Dongdong
    Xu Haitao
    Dong Duo
    He Yanming
    Zhao Xinyu
    He Qing
    RESULTS IN PHYSICS, 2019, 14
  • [44] The sintering densification, microstructure and mechanical properties of Ti-48Al-2Cr-2Nb by a small addition of Sn-Al powder
    Zhang, Ce
    Pan, Yu
    Hui, Tailong
    Xu, Wei
    Zhang, Shuaihua
    Mughal, Muhammad Arif
    Zhang, Jiazhen
    Lu, Xin
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2021, 15 : 6947 - 6955
  • [45] INFLUENCE OF SHOCK LOADING ON THE STRUCTURE-PROPERTY RESPONSE OF TI-48AL-2CR-2NB AND TI-24AL-11NB
    GRAY, GT
    JOURNAL DE PHYSIQUE IV, 1994, 4 (C8): : 373 - 378
  • [46] PREPARATION OF (Ti, Al)N/Ti2AlN COATINGS
    Dong Yuliang
    Yan Xubo
    Zhao Shengsheng
    Gong Jun
    Sun Chao
    ACTA METALLURGICA SINICA, 2010, 46 (06) : 743 - 747
  • [47] Effects of interstitial oxygen on microstructure and mechanical properties of Ti-48Al-2Cr-2Nb with fully lamellar and duplex microstructures
    Lamirand, M.
    Bonnentien, J. -L.
    Ferriere, G.
    Guerin, S.
    Chevalier, J. -P.
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2006, 37A (08): : 2369 - 2378
  • [48] Microstructure and Tensile Properties of Ti-48Al-2Cr-2Nb Rods Additively Manufactured by Selective Electron Beam Melting
    J. Wang
    K. Yang
    N. Liu
    L. Jia
    G. Y. Yang
    H. P. Tang
    JOM, 2017, 69 : 2751 - 2755
  • [49] Effects of Tantalum on the microstructure and properties of Ti-48Al-2Cr-2Nb alloy fabricated via laser additive manufacturing
    Liu, Zhanqi
    Wang, Chenyang
    Wang, Wenbo
    Xu, Guojian
    Liu, Xiangyu
    MATERIALS CHARACTERIZATION, 2021, 179
  • [50] The sintering densification, microstructure and mechanical properties of gamma Ti-48Al-2Cr-2Nb alloy with a small addition of copper
    Xia, Y.
    Luo, S. D.
    Wu, X.
    Schaffer, G. B.
    Qian, M.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2013, 559 : 293 - 300