Selective Area Modification of Silicon Surface Wettability by Pulsed UV Laser Irradiation in Liquid Environment

被引:1
|
作者
Liu, Neng [1 ]
Moumanis, Khalid [1 ]
Dubowski, Jan J. [1 ]
机构
[1] Univ Sherbrooke, Lab Quantum Semicond & Photon Based BioNanotechno, Interdisciplinary Inst Technol Innovat, LN2,CNRS UMI 3463, Sherbrooke, PQ J1K 2R1, Canada
来源
关键词
Engineering; Issue; 105; Silicon; surface wettability; laser-surface interaction; selective area processing; excimer laser; X-ray photoelectron spectroscopy; contact angle; INP/INGAAS/INGAASP MICROSTRUCTURES; WAFER; PHOTOELECTRON; MECHANISMS; ROUGHNESS; EMISSION; GRADIENT; ADHESION; WATER; FILM;
D O I
10.3791/52720
中图分类号
O [数理科学和化学]; P [天文学、地球科学]; Q [生物科学]; N [自然科学总论];
学科分类号
07 ; 0710 ; 09 ;
摘要
The wettability of silicon (Si) is one of the important parameters in the technology of surface functionalization of this material and fabrication of biosensing devices. We report on a protocol of using KrF and ArF lasers irradiating Si (001) samples immersed in a liquid environment with low number of pulses and operating at moderately low pulse fluences to induce Si wettability modification. Wafers immersed for up to 4 hr in a 0.01% H2O2/H2O solution did not show measurable change in their initial contact angle (CA) similar to 75 degrees. However, the 500-pulse KrF and ArF lasers irradiation of such wafers in a microchamber filled with 0.01% H2O2/H2O solution at 250 and 65 mJ/cm(2), respectively, has decreased the CA to near 15 degrees, indicating the formation of a superhydrophilic surface. The formation of OH-terminated Si (001), with no measurable change of the wafer's surface morphology, has been confirmed by X-ray photoelectron spectroscopy and atomic force microscopy measurements. The selective area irradiated samples were then immersed in a biotin-conjugated fluorescein-stained nanospheres solution for 2 hr, resulting in a successful immobilization of the nanospheres in the non-irradiated area. This illustrates the potential of the method for selective area biofunctionalization and fabrication of advanced Si-based biosensing architectures. We also describe a similar protocol of irradiation of wafers immersed in methanol (CH3OH) using ArF laser operating at pulse fluence of 65 mJ/cm(2) and in situ formation of a strongly hydrophobic surface of Si (001) with the CA of 103 degrees. The XPS results indicate ArF laser induced formation of Si-(OCH3)(x) compounds responsible for the observed hydrophobicity. However, no such compounds were found by XPS on the Si surface irradiated by KrF laser in methanol, demonstrating the inability of the KrF laser to photodissociate methanol and create -OCH3 radicals.
引用
收藏
页数:10
相关论文
共 50 条
  • [1] WETTABILITY MONITORING BY SURFACE MODIFICATION WITH FEMTOSECOND LASER IRRADIATION
    Coman, Diana
    Vrinceanu, Narcisa
    Grigoriu, Aurelia
    ANNALS OF DAAAM FOR 2008 & PROCEEDINGS OF THE 19TH INTERNATIONAL DAAAM SYMPOSIUM, 2008, : 297 - 298
  • [2] Pulsed UV Laser Modification of Polyester Textile Materials:Effect on Wettability
    黄志聪
    陈光
    杨国荣
    柳启瑞
    Journal of China Textile University(English Edition), 1999, (03) : 31 - 36
  • [3] Surface structure and morphology modification of silicon layers induced by nanosecond pulsed laser irradiation
    Demchuk, A
    THIN FILMS - STRUCTURE AND MORPHOLOGY, 1997, 441 : 627 - 632
  • [4] Surface modification of silicon and PTFE by laser surface treatment: improvement of wettability
    Kim, DY
    Lee, KC
    Lee, C
    FOURTH INTERNATIONAL SYMPOSIUM ON LASER PRECISION MICROFABRICATION, 2003, 5063 : 66 - 70
  • [5] Pulsed UV laser modification of polyester textile materials. Effect on wettability
    Wong, Wilson
    Chan, Kwong
    Yeung, Kwokwing
    Lau, Kaishui
    Journal of Dong Hua University (English Edition), 1999, 16 (03): : 31 - 36
  • [6] Surface modification on GaAs by in-situ pulsed UV laser
    Guo, Xiaoxiang
    Huo, Dayun
    Zhang, Wei
    Xu, Chao
    Deng, Changwei
    Peng, Changsi
    8TH INTERNATIONAL SYMPOSIUM ON ADVANCED OPTICAL MANUFACTURING AND TESTING TECHNOLOGIES: OPTOELECTRONIC MATERIALS AND DEVICES, 2016, 9686
  • [7] Microtribological modification of silicon carbide surface by laser irradiation
    Aono, Yuko
    Ando, Shotaro
    Hirata, Atsushi
    PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY, 2016, 43 : 270 - 276
  • [8] A STUDY ON THE RELATION BETWEEN MORPHOLOGICAL AND CHEMICAL CHANGES AND WETTABILITY MODIFICATION OF POLYETHERSULFONE SURFACE AFTER IRRADIATION WITH A PULSED KrF LASER
    Pazokian, Hedieh
    Vaziri, Mohammad Reza Rashidian
    SURFACE REVIEW AND LETTERS, 2022, 29 (02)
  • [9] Modification of reactively sputtered NiOx thin films by pulsed UV laser irradiation
    Itapu, Srikanth
    Georgiev, Daniel G.
    Uprety, Prakash
    Podraza, Nikolas J.
    PHYSICA STATUS SOLIDI A-APPLICATIONS AND MATERIALS SCIENCE, 2017, 214 (02):
  • [10] Surface Wettability Modification of Cyclic Olefin Polymer by Direct Femtosecond Laser Irradiation
    Wang, Bing
    Wang, Xincai
    Zheng, Hongyu
    Lam, Yee Cheong
    NANOMATERIALS, 2015, 5 (03): : 1442 - 1453