Effect of the Specimen Size on the Mechanical and Acoustic Characteristics of Concrete

被引:0
|
作者
Botvina, L. R. [1 ]
Shuvalov, A. N. [2 ]
Tyutin, M. R. [1 ]
Petersen, T. B. [3 ]
Levin, V. P. [1 ]
Fedorov, M. V. [2 ]
机构
[1] Russian Acad Sci, Baikov Inst Met & Mat Sci, Moscow 119334, Russia
[2] Univ Civil Engn, Moscow State Natl Res, Moscow 129337, Russia
[3] LLC Diapac, Moscow 125367, Russia
基金
俄罗斯基础研究基金会;
关键词
concrete; three-point bending; acoustic emission; size effect; ultrasonic attenuation; process zone;
D O I
10.1134/S0020168520150030
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
One of the important features of the fracture of heterogeneous materials with a stress concentrator is the scale effect associated with the dependence of the nominal stress on the specimen size. This effect should be taken into account by studying the fracture process of concrete to improve the operational safety of concrete structures. The aim of this work is to study the effect of sizes of the concrete specimens with a notch (concrete class B25, (R) over bar = 28 MPa) on the strength characteristics and parameters of acoustic emission (AE) recorded during the fracture process. Three-point bending tests with registration of AE signals were performed using specimens with three sizes (1075, 465, and 215 mm long), the geometry of which corresponded to two-dimensional similarity, since the specimen thickness remained unchanged, and both length to width ratios for the specimen and notch remained constant. The size of the zone of fracture localization at different stages of crack development was estimated on the larger specimens using the planar AE location and the time dependence of the zone size was plotted. For small specimens, the size of the localization zone was determined by measuring the ultrasonic attenuation coefficient. Analysis of the loading diagrams combined with the time dependences of the AE parameters showed that the specimen size affected the fracture staging. The dependences of the nominal strength, fracture energy, b(AE) parameter, and the total number of AE signals on the specimen size were plotted. It was shown that, for the large-sized specimens, the size effect was associated with the decrease in the nominal stress and number of accumulated acoustic emission signals, as well as with the increase in the fracture energy and b(AE) parameter. It is assumed that the change in the AE characteristics with the increase in the specimen size is determined by the decrease in the relative fraction of structural heterogeneity (the ratio of the average size of granite macadam to the specimen size) in large-size specimens. New data were obtained on the effect of the size of concrete specimens on the acoustic characteristics.
引用
收藏
页码:1528 / 1535
页数:8
相关论文
共 50 条
  • [41] The effect of size on the mechanical properties of rolled specimen: predictions and experimental evaluation
    Khuong Trieu
    Wang, Xiubing
    Zhang, Xinping
    MATERIALS RESEARCH EXPRESS, 2019, 6 (11)
  • [42] Effect of the specimen size in predicting the mechanical properties of PbSn solder alloys
    Bonda, NR
    Noyan, IC
    IEEE TRANSACTIONS ON COMPONENTS PACKAGING AND MANUFACTURING TECHNOLOGY PART A, 1996, 19 (02): : 208 - 212
  • [43] Probabilistic considerations on the effect of specimen size on the critical chloride content in reinforced concrete
    Angst, Ueli
    Ronnquist, Anders
    Elsener, Bernhard
    Larsen, Claus K.
    Vennesland, Oystein
    CORROSION SCIENCE, 2011, 53 (01) : 177 - 187
  • [44] Experimental investigation on specimen size effect of ferrous tailings concrete compressive strength
    Kang, Hongzhen
    Ma, Weihua
    Zhang, Kai
    Metallurgical and Mining Industry, 2015, 7 (06): : 289 - 294
  • [45] Effect of Aggregate Characteristics and Distribution on the Mechanical Characteristics of Recycled Concrete
    Guo, Lixia
    Yang, Yuqing
    Zhong, Ling
    Zhang, Jianwei
    ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING, 2024,
  • [46] The Effect of Demolition Concrete Waste on the Physical, Mechanical, and Durability Characteristics of Concrete
    Tang, Jian
    Cao, Jingying
    Luo, Hua
    Chen, Weihua
    Jia, Zhiyou
    Cunha, Sandra
    Aguiar, Jose
    BUILDINGS, 2024, 14 (04)
  • [47] Size Effect Stemming from Specimen Geometry on Mechanical Properties of an Aluminum Alloy
    Mishra, Vagish D.
    Venkatachalam, S.
    Rao, Balkrishna C.
    Murthy, H.
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2023, 32 (02) : 562 - 576
  • [48] Size Effect Stemming from Specimen Geometry on Mechanical Properties of an Aluminum Alloy
    Vagish D. Mishra
    S. Venkatachalam
    Balkrishna C. Rao
    H. Murthy
    Journal of Materials Engineering and Performance, 2023, 32 : 562 - 576
  • [49] Effects of specimen characteristics, fibre and mix constituents on the acoustic performance of rubberised concrete for traffic noise walls
    Jayathilakage, Roshan
    Hajimoahammadi, Ailar
    Pour, Hamid Vali
    Moreau, Danielle
    Foster, Stephen
    MATERIALS AND STRUCTURES, 2024, 57 (08)
  • [50] Effect of Specimen Size and Curing Condition on the Compressive Strength of Alkali-Activated Concrete
    Thomas, Robert James
    Peethamparan, Sulapha
    TRANSPORTATION RESEARCH RECORD, 2017, (2629) : 9 - 14