IMPACT OF AVIATION FUEL ON DURABILITY OF DIESEL COMMON RAIL INJECTION SYSTEM

被引:1
|
作者
Mickevicius, Tomas [1 ]
Slavinskas, Stasys [1 ]
Labeckas, Gvidonas [1 ]
机构
[1] Vytautas Magnus Univ, Kaunas, Lithuania
关键词
diesel fuel; aviation Jet-A1 fuel; lubricity; high-frequency reciprocating rig; wear scar; RAPESEED BIODIESEL; LUBRICITY;
D O I
10.22616/ERDev2019.18.N120
中图分类号
S2 [农业工程];
学科分类号
0828 ;
摘要
The article presents the experimental test results reflecting the impact of aviation fuel on durability of the main components of the Common Rail Direct Injection (CRDI) system used in light-duty diesel vehicles. The two identical fuel injection systems operating with turbine type Jet-A1 fuel and normal diesel fuel were prepared for the durability tests. The high-pressure fuel supply pump is one of the most overloaded components in the fuel injection system. Durability of the injection system largely depends on the lubricating properties of diesel fuel. The reduced durability of the fuel injection system's components, such as fuel supply pump and injectors, sometimes can be ascribed to a lack of the lubricating quality of diesel fuel. Considering the relatively poor lubricating properties of the Jet-A1 fuel one should remember that the main moving parts of the fuel system are affected by friction while working under the most difficult conditions in the diesel engine. Overall performance of the fuel delivery system and the surface roughness of the moving parts of the pump were evaluated and measured before and after the laboratory tests to determine the Jet-A1 fuel-made effects on durability of the high pressure fuel pump. The tests were carried out at the high injection pressure variable from 10 MPa till 110 MPa (load) during 300 hour durability tests. An optical microscope was used to measure the wear off surfaces and analyse the effect of the aviation fuel on the surface micro structure of the studied parts. The High-Frequency Reciprocating Rig (HFRR) method was used to measure the resulting wear on the ball to evaluate the lubricity properties of Jet-A1 fuel. The values of the wear scar diameter (WSD) obtained with Jet-A1 fuel were compared to the respective values measured with the reference diesel fuel. The microscopic photographs of the wear scar diameters obtained on the test balls for the above mentioned fuels are presented in the paper.
引用
收藏
页码:977 / 981
页数:5
相关论文
共 50 条
  • [31] Impact of biodiesel on NOx emissions in a common rail direct injection diesel engine
    Zhang, Yu
    Boehman, Andre L.
    ENERGY & FUELS, 2007, 21 (04) : 2003 - 2012
  • [32] Study of impact of fuel injection parameters on the particle emission characteristics of common rail diesel engines based on PLS algorithm
    Lou, Di-Ming
    Hu, Qing-Yao
    Hu, Zhi-Yuan
    Tan, Pi-Qiang
    Neiranji Gongcheng/Chinese Internal Combustion Engine Engineering, 2015, 36 (05): : 56 - 62
  • [33] spray and combustion characteristics of biodiesel/diesel blended fuel in a direct injection common-rail diesel engine
    Suh, Hyun Kyu
    Roh, Hyun Gu
    Lee, Chang Sik
    JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER-TRANSACTIONS OF THE ASME, 2008, 130 (03):
  • [34] Spray and atomization of diesel fuel and its alternatives from a single-hole injector using a common rail fuel injection system
    Chen, Pin-Chia
    Wang, Wei-Cheng
    Roberts, William L.
    Fang, Tiegang
    FUEL, 2013, 103 : 850 - 861
  • [35] An experimental investigation of the combustion process and the injection strategy of a heavy-duty diesel engine equipped with a common rail fuel injection system
    Kutkut, Almoutazbellah
    Kumar, Raj
    Li, Hailin
    FUEL, 2025, 380
  • [36] Characteristics of the ignition and combustion of biodiesel fuel spray injected by a common-rail injection system for a direct-injection diesel engine
    Kuti, O. A.
    Xiangang, W. G.
    Zhang, W.
    Nishida, K.
    Huang, Z. H.
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART D-JOURNAL OF AUTOMOBILE ENGINEERING, 2010, 224 (D12) : 1581 - 1596
  • [37] Operational Control of Power Indicators of Diesel Engines with Common Rail Fuel System
    Safin, F. R.
    Bashirov, R. M.
    Negovora, A., V
    Korabelnikovb, S. K.
    Rakov, N. V.
    ENGINEERING TECHNOLOGIES AND SYSTEMS, 2023, 33 (02):
  • [38] Study of fuel spray characteristics using a high-pressure common rail diesel injection system by the method of Schlieren
    Wang, Zhong
    Qian, Yikai
    Li, Ruina
    INTERNATIONAL JOURNAL OF ENGINE RESEARCH, 2023, 24 (08) : 3445 - 3459
  • [39] Study on phase determination and fuel injection HIL system for FPGA based high pressure common rail diesel engines
    Zhang, Sheng-Bin
    Shen, Li-Zhong
    Wang, Gui-Yong
    Yao, Guo-Zhong
    Liu, Shao-Hua
    Neiranji Gongcheng/Chinese Internal Combustion Engine Engineering, 2015, 36 (03): : 117 - 121
  • [40] Design of ECU for common rail system of diesel engine and study of injection characteristics
    School of Mechanical and Power Engineering, Shanghai Jiaotong University, Shanghai 200030, China
    Neiranji Xuebao, 2006, 1 (28-34):