The Influence of Cyclic Loading on Ultimate Bending Strength of Beech Solid and Laminated Wood

被引：6

作者：

Gaff, Milan ^{[1
]}

Gasparik, Miroslav ^{[2
]}

Barcik, Stefan ^{[2
]}

机构：

[1] Tech Univ, Fac Wood Sci & Technol, Dept Furniture & Wood Prod, Zvolen, Slovakia

[2] Czech Univ Life Sci Prague, Fac Forestry & Wood Sci, Dept Wood Proc, Prague 16521 6, Suchdol, Czech Republic

来源：

DRVNA INDUSTRIJA | 2014年 / 65卷 / 03期

关键词：

cyclic loading; laminated wood; solid wood; ultimate bending strength; beech wood; PVAC adhesive;

D O I：

10.5552/drind.2014.1336

中图分类号：

TB3 [工程材料学]; TS [轻工业、手工业、生活服务业];

学科分类号：

0805 ; 080502 ; 0822 ;

摘要：

This work investigates the influence of cyclic loading of beech solid and laminated wood of various thicknesses on ultimate bending strength (ultimate flexural strength) sigma(p) during bending in radial direction. For identification of ultimate bending strength, the static bending test with three-point loading was used. The ultimate bending strength was detected on testing samples that were not cyclically loaded and the results were compared with other results obtained from samples that were cyclically loaded. The results of this work show that the influence of cyclic loading on values of ultimate bending strength for solid and laminated wood is not significant. Thickness influence is a significant factor for both tested materials. The results show that the increase of thickness causes the decrease of ultimate bending strength. In our opinion, the decrease of ultimate bending strength is not caused by the sample thickness but by different sample lengths. With the increase of the sample length, the influence of inhomogeneous wood properties also increases.

引用

页码：197 / 203

页数：7

共 50 条

[21] The Effect of Periodic Loading of Glued Laminated Beams on Their Static Bending Strength
Dziurka, Dorota
Derkowski, Adam
Dukarska, Dorota
Kawalerczyk, Jakub
Mirski, Radoslaw
MATERIALS, 2022, 15 (11)
[22] CYCLIC LOADING FREQUENCY INFLUENCE ON THE BEHAVIOUR OF LAMINATED LEATHER
Milasiene, Daiva
Fataraite, Egle
ITC&DC: 5TH INTERNATIONAL TEXTILE, CLOTHING & DESIGN CONFERENCE 2010, BOOK OF PROCEEDINGS: MAGIC WORLD OF TEXTILES, 2010, : 658 - 662
[23] The Effect of the Loading Frequency on the Dynamic Bending Strength of Spruce Wood
Zupanc, Enej Lipovec
Humar, Miha
Fajdiga, Gorazd
MATERIALS, 2024, 17 (18)
[24] Relationship between tensile and bending strength in solid wood
Burger, N
Glos, P
HOLZ ALS ROH-UND WERKSTOFF, 1997, 55 (06) : 345 - 350
[25] Influence of loading point on the static bending test of wood
Yoshihara, H
Fukuda, A
JOURNAL OF WOOD SCIENCE, 1998, 44 (06) : 473 - 481
[26] Influence of loading point on the static bending test of wood
Hiroshi Yoshihara
Ai Fukuda
Journal of Wood Science, 1998, 44 : 473 - 481
[27] Ultimate Strength of Hull Perforated Plate Under Extreme Cyclic Loading
Zheng, Ji-Qian
Feng, Liang
Chen, Xu-Guang
Chuan Bo Li Xue/Journal of Ship Mechanics, 2024, 28 (12): : 1925 - 1939
[28] Influence of xylem ray integrity and degree of polymerization on bending strength of beech wood decayed by Pleurotus ostreatus and Trametes versicolor
Bari, Ehsan
Oladi, Reza
Schmidt, Olaf
Clausen, Carol A.
Ohno, Katie
Nicholas, Darrel D.
Daryaei, Mehrdad Ghodskhah
Karim, Maryam
INTERNATIONAL BIODETERIORATION & BIODEGRADATION, 2015, 104 : 299 - 306
[29] INFLUENCE OF BEAM HEIGHT ON THE BENDING STRENGTH OF GLUED LAMINATED TIMBER
RUG, W
BADSTUBE, M
SCHONE, W
HOLZ ALS ROH-UND WERKSTOFF, 1992, 50 (7-8) : 317 - 321
[30] The influence of carbon lamella on strength properties of spruce wood loaded by mechanical-thermo loading in bending
Rohanová, A
Krakovsky, A
Král, S
WOOD RESEARCH, 2003, 48 (1-2): : 43 - 52

← 1 2 3 4 5 →