Effects of wire-EDM parameters on the surface integrity and mechanical characteristics of additively manufactured Inconel 939

被引：12
|
作者：
Ozaner, Ozan Can [1 ]
Dursun, Gokhan [1 ]
Akbulut, Guray [1 ]
机构：
[1] TUSAS Engine Ind Inc, Eskisehir, Turkey
来源：
MATERIALS TODAY-PROCEEDINGS | 2021年 / 38卷
关键词：
Wire EDM; Selective laser melting; Surface integrity;
D O I：
10.1016/j.matpr.2020.08.486
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Inconel 939 is nickel-based superalloy which offers remarkable material characteristics at high temperature applications. It is therefore mainly used in hot section of gas turbine engines parts that require high temperature corrosion resistance and creep performance. In this research, the W-EDM parameters such as pulse off time and pulse on time are investigated to examine their effects on surface integrity and mechanical characteristics of additively manufactured Inconel 939 with different building direction. Experimental study is performed to reveal the surface integrity properties including recast layer and surface roughness in addition to their impacts on the tensile properties of Inconel 939. (C) 2020 Elsevier Ltd. All rights reserved.
引用
收藏
页码：1861 / 1865
页数：5
相关论文
共 50 条
  • [31] An investigation on effects of wire-EDM machining parameters on surface roughness of newly developed DC53 die steel
    Kanlayasiri, K.
    Boonmung, S.
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2007, 187 : 26 - 29
  • [32] Surface integrity evolution of powder metallurgical tool steel by main cut and finishing trim cuts in wire-EDM
    Klink, A.
    Guo, Y. B.
    Klocke, F.
    1ST CIRP CONFERENCE ON SURFACE INTEGRITY (CSI), 2011, 19
  • [33] Interface characterization of additively manufactured Inconel 718 heterogeneous products: microstructural and surface characteristics
    Shrivastava, Abhishek
    Kumar, S. Anand
    Rao, Samrat
    ENGINEERING RESEARCH EXPRESS, 2025, 7 (01):
  • [34] Enhancing surface integrity of additively manufactured Inconel 718 through numerical modeling of hydrostatic ball burnishing parameters using TOPSIS and ANOVA
    Vignesh, Gopal
    Oyyaravelu, Ramachandran
    ENGINEERING RESEARCH EXPRESS, 2024, 6 (04):
  • [35] Study on improving surface integrity for additively manufactured Inconel 718 via high-speed micromilling
    Gururaja, Sethurao
    Alya, Sachin
    Singh, Kundan K.
    MATERIALS AND MANUFACTURING PROCESSES, 2025, 40 (03) : 335 - 352
  • [36] Enhancement of surface characteristics of additively manufactured γ-TiAl and IN939 alloys after laser shock processing
    Ozer, Mahmut
    Yilmaz, Oguzhan
    Subasi, Levent
    Gunaydin, Aydemir
    Bilgin, Guney Mert
    Zulic, Sanin
    Kaufman, Jan
    OPTICS AND LASER TECHNOLOGY, 2024, 170
  • [37] Investigations on the effect of wire EDM process parameters on surface integrity of HSLA: a multi-performance characteristics optimization
    Khan, Noor Zaman
    Khan, Zahid A.
    Siddiquee, Arshad Noor
    Chanda, Arindam K.
    PRODUCTION AND MANUFACTURING RESEARCH-AN OPEN ACCESS JOURNAL, 2014, 2 (01): : 501 - 518
  • [38] Microstructure characteristics of warm spray additively manufactured Inconel 718 superalloys and correlation with mechanical performance
    Wang, Qian
    Ma, Ninshu
    Chen, Jingjia
    Tomitaka, Sora
    Watanabe, Makoto
    MATERIALS LETTERS, 2023, 341
  • [39] Interface characteristics and mechanical behavior of additively manufactured multi-material of stainless steel and Inconel
    Sagong, Man Jae
    Kim, Eun Seong
    Park, Jeong Min
    Karthik, Gangaraju Manogna
    Lee, Byeong-Joo
    Cho, Jung-Wook
    Lee, Chong Soo
    Nakano, Takayoshi
    Kim, Hyoung Seop
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2022, 847
  • [40] Enhanced oxidation resistance of additively manufactured Inconel 718 superalloy by surface mechanical attrition treatment
    Guo, Chuan
    Wang, Jingchen
    Lu, Hongxing
    Wang, Yanmin
    Bai, Jianing
    Li, Gan
    Yin, Yu
    Yao, Lu
    Zhu, Qiang
    Lu, Jian
    CORROSION SCIENCE, 2025, 246
12345