Performance improvement of natural draft dry cooling system by interior and exterior windbreaker configurations

被引:68
|
作者
Chen, Lei [1 ]
Yang, Lijun [1 ]
Du, Xiaoze [1 ]
Yang, Yongping [1 ]
机构
[1] North China Elect Power Univ, Sch Energy Power & Mech Engn, Key Lab Condit Monitoring & Control Power Plant E, Minist Educ, Beijing 102206, Peoples R China
基金
中国国家自然科学基金;
关键词
Natural draft dry cooling system; Air-cooled heat exchanger; Dry-cooling tower; Windbreakers; Crosswinds; Back pressure; TOWER; EFFICIENCY; CROSSWIND;
D O I
10.1016/j.ijheatmasstransfer.2016.01.021
中图分类号
O414.1 [热力学];
学科分类号
摘要
Ambient winds are basically unfavorable to the thermo-flow performances of natural draft dry cooling system, and may result in a reduced thermal efficiency for the power generating unit in power plants, so it is of benefit to the natural draft dry cooling system to propose the measures against the adverse effects of ambient winds. For a typical natural draft dry cooling system, the computational models of the flow and heat transfer of cooling air coupled with the energy balances of circulating water and exhaust steam are developed, by which the performance improvement due to the interior and exterior windbreaker configurations is investigated. The flow and temperature fields of cooling air, the flow rate and heat rejection of each sector, the outlet water temperature of heat exchanger for the natural draft dry cooling systems with and without windbreaker configurations, and the corresponding turbine back pressures are obtained. The results show that the exterior windbreakers are superior to the interior ones in thermo-flow performances. The turbine back pressure can be reduced by the windbreaker configurations in the presence of ambient winds, especially at high wind speeds. (C) 2016 Elsevier Ltd. All rights reserved.
引用
收藏
页码:42 / 63
页数:22
相关论文
共 50 条
  • [1] Evaporation aided improvement for cooling performance of large scale natural draft dry cooling system
    Huang, Xianwei
    Chen, Lin
    Yang, Lijun
    Du, Xiaoze
    Yang, Yongping
    [J]. APPLIED THERMAL ENGINEERING, 2019, 163
  • [2] Analysis of windbreaker combinations on steam power plant natural draft dry cooling towers
    Zavaragh, Hadi Ghasemi
    Ceviz, Mehmet Akif
    Tabar, Mohammed Taghi Shervani
    [J]. APPLIED THERMAL ENGINEERING, 2016, 99 : 550 - 559
  • [3] Performance improvement of natural draft dry cooling system by water flow distribution under crosswinds
    Wang, Xuebo
    Yang, Lijun
    Du, Xiaoze
    Yang, Yongping
    [J]. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2017, 108 : 1924 - 1940
  • [4] Cooling performance of cylinder-frustum natural draft dry cooling tower
    Song, Guoqing
    Zhi, Xudong
    Fan, Feng
    Wang, Wei
    Wang, Peng
    [J]. APPLIED THERMAL ENGINEERING, 2020, 180
  • [5] Investigation on Draft Equation for Natural Draft Dry Cooling Tower
    Sun, Manman
    Wei, Huimin
    Yang, Lijun
    Du, Xiaoze
    [J]. Zhongguo Dianji Gongcheng Xuebao/Proceedings of the Chinese Society of Electrical Engineering, 2020, 40 (03): : 859 - 866
  • [6] Natural draft dry cooling tower modelling
    K. Tanimizu
    K. Hooman
    [J]. Heat and Mass Transfer, 2013, 49 : 155 - 161
  • [7] Natural draft dry cooling tower modelling
    Tanimizu, K.
    Hooman, K.
    [J]. HEAT AND MASS TRANSFER, 2013, 49 (02) : 155 - 161
  • [8] Spray cooling system design and optimization for cooling performance enhancement of natural draft dry cooling tower in concentrated solar power plants
    Sun, Yubiao
    Guan, Zhigiang
    Gurgenci, Hal
    Wang, Jianyong
    Dong, Peixin
    Hooman, Kamel
    [J]. ENERGY, 2019, 168 : 273 - 284
  • [9] The influence of windbreak wall orientation on the cooling performance of small natural draft dry cooling towers
    Lu, Yuanshen
    Gurgenci, Hal
    Guan, Zhiqiang
    He, Suoying
    [J]. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2014, 79 : 1059 - 1069
  • [10] Pre-cooling with Munters media to improve the performance of Natural Draft Dry Cooling Towers
    He, Suoying
    Gurgenci, Hal
    Guan, Zhiqiang
    Alkhedhair, Abdullah M.
    [J]. APPLIED THERMAL ENGINEERING, 2013, 53 (01) : 67 - 77