The Grey-Based Taguchi Method: Optimisation of Drilling of Hybrid Aluminum Matrix Composites

被引：7

作者：

Ay, M. ^{[1
]}

Altunpak, Y. ^{[2
]}

Hartomacioglu, S. ^{[1
]}

机构：

[1] Marmara Univ, Fac Technol, Dept Mech Engn, TR-34722 Istanbul, Turkey

[2] Abant Izzet Baysal Univ, Fac Engn & Architecture, Mech Engn, TR-14280 Bolu, Turkey

来源：

ACTA PHYSICA POLONICA A | 2017年 / 131卷 / 03期

关键词：

81.05.-t; WORKPIECE SURFACE INTEGRITY; PARAMETERS; ROUGHNESS;

D O I：

10.12693/APhysPolA.131.551

中图分类号：

O4 [物理学];

学科分类号：

0702 ;

摘要：

The aim of this study was to investigate the influence of cutting parameters and effect of graphite rate on cutting force and surface roughness in drilling of Al/20% SiC/5% Gr, Al/20% SiC/7.5% Gr and Al/20% SiC/10% Gr hybrid composites, fabricated by vortex method. The drilling tests are conducted with diamond-like-carbon coated cutting tools. The Grey relational analysis based Taguchi optimization method was selected to determine the optimum cutting conditions. The results show that the spindle speed ( 4500 rpm), the rate of graphite (10%) and feed (0.1 mm/rev) were found to be significant parameters for surface roughness and cutting force. The predicted values from the developed model and experimental values are found to be very similar in this study.

引用

页码：551 / 554

页数：4

共 50 条

[1] Optimisation of multiple quality characteristics of hardfacing using grey-based Taguchi method
Ilo, S.
Just, Ch
Xhiku, F.
[J]. MATERIALS & DESIGN, 2012, 33 : 459 - 468
[2] Optimisation of machining parameters in interrupted cylindrical grinding using the Grey-based Taguchi method
Koklu, Ugur
[J]. INTERNATIONAL JOURNAL OF COMPUTER INTEGRATED MANUFACTURING, 2013, 26 (08) : 696 - 702
[3] The Grey-Based Taguchi Method: Optimization of Milling of Mold Steel
Basmaci, G.
Ay, M.
Etyemez, A.
[J]. ACTA PHYSICA POLONICA A, 2018, 134 (01) : 24 - 27
[4] Optimisation of Machining Parameters in Turning AISI 304L Stainless Steel by the Grey-Based Taguchi Method
Ay, M.
[J]. ACTA PHYSICA POLONICA A, 2017, 131 (03) : 349 - 353
[5] Some studies on drilling of hybrid metal matrix composites based on Taguchi techniques
Basavarajappa, S.
Chandramohan, G.
Davim, J. Paulo
[J]. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2008, 196 (1-3) : 332 - 338
[6] MADM TECHNIQUE INTEGRATED WITH GREY-BASED TAGUCHI METHOD FOR SELECTION OF ALLUMINIUM ALLOYS TO MINIMIZE DEBURRING COST DURING DRILLING
Sreenivasulu, Reddy
Chaitanya, Goteti
[J]. INDEPENDENT JOURNAL OF MANAGEMENT & PRODUCTION, 2015, 6 (02): : 464 - 477
[7] Optimization of the film coating process for polymer blends by the grey-based Taguchi method
Chung-Feng Jeffrey Kuo
Yi-Shiuan Wu
[J]. The International Journal of Advanced Manufacturing Technology, 2006, 27 : 525 - 530
[8] A grey-based Taguchi method to optimize design of muzzle flash restraint device
Chang, CS
Liao, RC
Wen, KL
Wang, WP
[J]. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2004, 24 (11-12): : 860 - 864
[9] Optimization of Drilling of Carbon Fiber Reinforced Polymer with the Grey-Based Method
Ay, M.
Basmaci, G.
Yoruk, A. Said
Etyemez, A.
[J]. ACTA PHYSICA POLONICA A, 2020, 137 (04) : 535 - 538
[10] The Application of the Grey-based Taguchi Method to Optimize the Global Performances of the Robot Manipulator
Lim, Hyunseop
Hwang, Soonwoong
Shin, Kyoosik
Han, Changsoo
[J]. IEEE/RSJ 2010 INTERNATIONAL CONFERENCE ON INTELLIGENT ROBOTS AND SYSTEMS (IROS 2010), 2010,

← 1 2 3 4 5 →