Optimization of Drilling of Carbon Fiber Reinforced Polymer with the Grey-Based Method

被引：0
|
作者：
Ay, M. [1 ]
Basmaci, G. [2 ]
Yoruk, A. Said [3 ]
Etyemez, A. [4 ]
机构：
[1] Marmara Univ, Fac Technol, Istanbul, Turkey
[2] Mehmet Akif Ersoy Univ, Fac Engn & Architecture, Burdur, Turkey
[3] Igdir Univ, Tech Sci Vocat Sch, Igdir, Turkey
[4] Nikken, Istanbul, Turkey
来源：
ACTA PHYSICA POLONICA A | 2020年 / 137卷 / 04期
关键词：
MINIMUM QUANTITY LUBRICATION; STAINLESS-STEEL; MACHINABILITY; PARAMETERS; DESIGN; COMPOSITES;
D O I：
10.12693/APhysPolA.137.535
中图分类号：
O4 [物理学];
学科分类号：
0702 ;
摘要：
The present study investigates the effect of cutting speed, feed rate, and drill diameter on thrust force, delamination factor, surface quality, and drill wear in drilling carbon fiber reinforced polymer composite (CFRP). The drilling tests are conducted with solid carbide drills cutting tools. In order to determine the optimum cutting conditions, the Taguchi method is used in the experimental design. The Grey relational analysis is used to optimize the drilling parameters of these composites. To minimize the compressive forces that occur during drilling, as a result of the Grey relational analysis, 0.075 feed, 4 mm drill diameter, and 50 mm/min cutting speed parameters appear to be efficient.
引用
收藏
页码：535 / 538
页数：4
相关论文
共 50 条
  • [1] Multi-objective optimization of carbon fiber–reinforced polymer drilling process based on grey fuzzy reasoning grade analysis
    Quang-Phuoc Tran
    Thi-Diem-My Le
    Shyh-Chour Huang
    [J]. The International Journal of Advanced Manufacturing Technology, 2021, 115 : 503 - 513
  • [2] Optimization of the film coating process for polymer blends by the grey-based Taguchi method
    Chung-Feng Jeffrey Kuo
    Yi-Shiuan Wu
    [J]. The International Journal of Advanced Manufacturing Technology, 2006, 27 : 525 - 530
  • [3] Optimization of the film coating process for polymer blends by the grey-based Taguchi method
    Kuo, CFJ
    Wu, YS
    [J]. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2006, 27 (5-6): : 525 - 530
  • [4] Multi-objective optimization of carbon fiber-reinforced polymer drilling process based on grey fuzzy reasoning grade analysis
    Quang-Phuoc Tran
    Thi-Diem-My Le
    Huang, Shyh-Chour
    [J]. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2021, 115 (1-2): : 503 - 513
  • [5] Optimization of bone drilling parameters using grey-based fuzzy algorithm
    Pandey, Rupesh Kumar
    Panda, S. S.
    [J]. MEASUREMENT, 2014, 47 : 386 - 392
  • [6] Micro drilling of carbon fiber reinforced polymer
    Basso, Igor
    Batista, Marcelo Ferreira
    Jasinevicius, Renato Goulart
    Campos Rubio, Juan Carlos
    Rodrigues, Alessandro Roger
    [J]. COMPOSITE STRUCTURES, 2019, 228
  • [7] Taguchi Grey Relational Analysis based Optimization of Micro-Drilling Parameters on Carbon Fiber Reinforced Plastics
    Shunmugesh, K.
    Pratheesh, Amal
    [J]. MATERIALS TODAY-PROCEEDINGS, 2020, 24 : 1994 - 2003
  • [8] Optimization of Process Parameters in Micro-drilling of Carbon Fiber Reinforced Polymer (CFRP) Using Taguchi and Grey Relational Analysis
    Shunmugesh, K.
    Panneerselvam, K.
    [J]. POLYMERS & POLYMER COMPOSITES, 2016, 24 (07): : 499 - 506
  • [9] The Grey-Based Taguchi Method: Optimization of Milling of Mold Steel
    Basmaci, G.
    Ay, M.
    Etyemez, A.
    [J]. ACTA PHYSICA POLONICA A, 2018, 134 (01) : 24 - 27
  • [10] Optimization of Drilling Characteristics using Grey-Fuzzy logic in Glass Fiber Reinforced Polymer (GFRP)
    Shunmugesh, K.
    Akhil, K. T.
    Aravind, S.
    Pramodkumar, M.
    [J]. MATERIALS TODAY-PROCEEDINGS, 2017, 4 (08) : 8938 - 8947
12345