Sensorless Direct Torque and Indirect Flux Control of Brushless DC Motor with Non-sinusoidal Back-EMF

In this paper, the position sensorless direct torque and indirect flux control (DTIFC) of BLDC motor with non-sinusoidal (non-ideal trapezoidal) back-EMF has been extensively investigated using three-phase conduction scheme with six-switch inverter. In the literature, several methods have been proposed to eliminate the low-frequency torque pulsations for BLDC motor drives such as Fourier series analysis Of current waveforms and either iterative or least-mean-square minimization techniques. Most methods do not consider the stator flux linkage control, therefore possible high-speed operations are not feasible. In this work, a novel and simple approach to achieve a low-frequency torque ripple-free direct torque control with maximum efficiency based on dq reference frame similar to permanent magnet synchronous motor (PMSM) drives is presented. The electrical rotor position is estimated using winding inductance, and the stationary reference frame stator flux linkages and currents. The proposed sensorless DTC method controls the torque directly and stator flux amplitude indirectly using d-axis current. Since stator flux is controllable, flux-weakening operation is possible. Moreover, this method also permits to regulate the varying signals. Simple voltage vector selection look-up table is designed to obtain fast torque and flux control. Furthermore, to eliminate the low-frequency torque oscillations, two actual and easily available line-to-line back-EMF constants (k(ba) and k(ca)) according to electrical rotor position are obtained offline and converted to the dq frame equivalents using the new, Line-to-Line Park Transformation. Then, they are set up in the look-up table for torque estimation. The validity and practical applications of the proposed three-phase conduction DTC of BLDC motor drive scheme are verified through simulations and experimental results.