LP compressor blade vibration characteristics at starting conditions of a 100 MW heavy-duty gas turbine

被引:1
|
作者
Lee, AS [1 ]
Vedichtchev, AF
机构
[1] Korea Inst Machinery & Mat, Rotor Dynam Grp, Taejon 305600, South Korea
[2] Leningradsky Met Zavod, Gas Turbine Dept, St Petersburg 191914, Russia
来源
KSME INTERNATIONAL JOURNAL | 2004年 / 18卷 / 06期
关键词
compressor blade vibrations; starting conditions; heavy-duty gas turbine; blade dynamic stresses; surge; rotating stall; buffeting flutter; stalled oscillations;
D O I
10.1007/BF02990861
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
In this paper are presented the blade vibration characteristics at the starting conditions of the low pressure multistage axial compressor of heavy-duty 100MW gas turbine. Vibration data have been collected through strain gauges during aerodynamic tests of the model compressor. The influences of operating modes at the starting conditions are investigated upon the compressor blade vibrations. The exciting mechanisms and features of blade vibrations are investigated at the surge, rotating stall, and buffeting flutter. The influences of operating modes upon blade dynamic stresses are investigated for the first and second stages. It is shown that a high dynamic stress peak of 120 MPa can occur in the first stage blades due to resonances with stall cell excitations or with inlet strut wake excitations at the stalled conditions.
引用
收藏
页码:895 / 903
页数:9
相关论文
共 50 条
  • [21] Unsteady vibration of gas turbine compressor blade at subsonic near-stall conditions
    Yamaguchi, Kazuyuki
    Takahashi, Yasuo
    [J]. Nihon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C, 2013, 79 (806): : 3574 - 3583
  • [22] Study on combustion and emission characteristics of a heavy-duty gas turbine combustor fueled with natural gas
    Zeng, Wen
    Pang, Liyao
    Zheng, Weilin
    Hu, Erjiang
    [J]. FUEL, 2020, 275
  • [23] Humidity Effects on Corrosion-Assisted Fatigue Fracture of Heavy-Duty Gas Turbine Compressor Blades
    Poursaeidi, Esmaeil
    Arablu, Masoud
    [J]. JOURNAL OF PROPULSION AND POWER, 2013, 29 (05) : 1009 - 1016
  • [24] Fatigue Failure of LP Compressor Blade in an Aero Gas Turbine Engine
    Mishra, R. K.
    Thomas, Johney
    Srinivasan, K.
    Ahmed, Syed Iftekar
    [J]. JOURNAL OF FAILURE ANALYSIS AND PREVENTION, 2014, 14 (03) : 296 - 302
  • [25] Impact of inlet distortion on the flow characteristics of a heavy-duty gas turbine cylinder pressure
    Shi, Yunjiao
    Zhao, Ningbo
    Zheng, Hongtao
    [J]. Qinghua Daxue Xuebao/Journal of Tsinghua University, 2024, 64 (01): : 90 - 98
  • [26] Strength Analysis of Bearing Support in Heavy-Duty Gas Turbine
    Duan, Wenbo
    Deng, Zhikai
    Cheng, Wenjie
    [J]. 2021 4TH INTERNATIONAL CONFERENCE ON ROBOTICS, CONTROL AND AUTOMATION ENGINEERING (RCAE 2021), 2021, : 321 - 325
  • [28] Development of a catalytic combustor for a heavy-duty utility gas turbine
    DallaBetta, RA
    Schlatter, JC
    Nickolas, SG
    Cutrone, MB
    Beebe, KW
    Furuse, Y
    Tsuchiya, T
    [J]. JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER-TRANSACTIONS OF THE ASME, 1997, 119 (04): : 844 - 851
  • [29] Model and field testing of a heavy-duty gas turbine combustor
    Ahn, KY
    Kim, HS
    Antonovsky, VI
    [J]. KSME INTERNATIONAL JOURNAL, 2001, 15 (09): : 1319 - 1327
  • [30] Model and field testing of a heavy-duty gas turbine combustor
    Kook-Young Ahn
    Han-Seok Kim
    Vjacheslav Ivanovich Antonovsky
    [J]. KSME International Journal, 2001, 15 : 1319 - 1327