Decomposition of silica binder during infiltration of Saffil fiber preform with Mg and Mg-Li melts

被引:0
|
作者
Kudela, S., Jr. [1 ]
Izdinsky, K. [1 ]
Oswald, S. [2 ]
Ranachowski, P. [3 ]
Ranachowski, Z. [3 ]
Kudela, S. [1 ]
机构
[1] Slovak Acad Sci, Inst Mat & Machine Mech, Bratislava 83102, Slovakia
[2] IFW Dresden, Inst Complex Mat, D-01171 Dresden, Germany
[3] Polish Acad Sci, Inst Fundamental Technol Res, PL-02106 Warsaw, Poland
来源
KOVOVE MATERIALY-METALLIC MATERIALS | 2014年 / 52卷 / 04期
关键词
Mg-Li composites; Saffil fibers; silica binder; melt infiltration; XPS; FTIR; METAL-MATRIX COMPOSITES; SPECTROSCOPY; XPS; SURFACES; GLASSES; SYSTEM; MG2SI; PHASE;
D O I
10.4149/km_2014_4_183
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
Mg and Mg-Li matrix composites were prepared by the melt infiltration of fibrous preform consisting of Saffil alumina fibers and the silica binder. During this process there has occurred decomposition of silica binder and/or surface silica film by displacement redox reactions and the reaction products were characterized using SEM, TEM, SAED, FTIR and XPS techniques. The only reaction products found in Mg infiltrated Saffil preform were MgO and Mg2Si. In Mg-Li melt infiltrated Saffil preform there was found besides MgO and Mg2Si also the non-crystalline phase that appears to be the lithium silicate xLi(2)O center dot ySiO(2). Binary lithium silicides and ternary magnesium-lithium silicides were not detected.
引用
收藏
页码:183 / 188
页数:6
相关论文
共 43 条
  • [31] Investigation on melt concentration during thermal stabilization before directional growth in a Mg-Li eutectic alloy in presence of element volatilization
    Peng, Peng
    Zheng, Wanchao
    Pei, Xing
    Xu, Yuanli
    Zhang, Xudong
    Ma, Zhikun
    Wang, Jiatai
    MATERIALS CHEMISTRY AND PHYSICS, 2023, 296
  • [32] Bimodal Phenomenon of the Stress-Strain Curve During Hot Compression of LA43M Mg-Li Alloy
    Li, Yi
    Guan, Yanjin
    Chen, Hu
    Zhai, Jiqiang
    Lin, Jun
    Chen, Liang
    METALS AND MATERIALS INTERNATIONAL, 2021, 27 (10) : 4195 - 4203
  • [33] Experimental Analysis and Mathematical Modeling on Mg-Li Alloy Sheets with Three Crystal Structures during Cold Rolling and Heat Treatment
    Tang, Yan
    Le, Qichi
    Wang, Tong
    Chen, Xingrui
    MATERIALS, 2017, 10 (10):
  • [34] Effect of processing parameters on the microstructure and tensile properties of a dual-phase Mg-Li alloy during friction stir processing
    Li, Yi
    Guan, Yanjin
    Liu, Ya
    Zhai, Jiqiang
    Hu, Kai
    Lin, Jun
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2022, 17 : 2714 - 2724
  • [35] Investigating ion release using inline ICP during in situ scratch testing of an Mg-Li(-Al-Y-Zr) alloy
    Yan, Yuanming
    Zhou, Peng
    Gharbi, Oumanna
    Zeng, Zhuoran
    Chen, Xiaobo
    Volovitch, Polina
    Ogle, Kevin
    Birbilis, Nick
    ELECTROCHEMISTRY COMMUNICATIONS, 2019, 99 : 46 - 50
  • [36] Mechanism of phase refinement and its effect on mechanical properties of a severely deformed dual-phase Mg-Li alloy during annealing
    Guo, Fei
    Liu, Lei
    Ma, Yanlong
    Jiang, Luyao
    Zhang, Dingfei
    Pan, Fusheng
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2020, 772
  • [37] Economical and simple in-situ synthesis of CuS@Cu foam as a binder-free cathode for high-performance hybrid Mg-Li ion batteries
    Liu, Yang
    Yang, Jingdong
    Wen, Jiaxin
    Ye, Junliu
    Liu, Huan
    Lu, Liwei
    JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS, 2024, 35 (17)
  • [38] Machining-induced residual stress and deformation during Mg-Li alloy thin-walled rib-web parts milling
    Chen, Zhijun
    Qian, Lingyun
    Ji, Xiaoyuan
    Zhang, Qingdong
    Wei, Tengbowen
    Chen, Jingju
    Hao, Sufeng
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2024, 238 (14) : 2102 - 2114
  • [39] Investigation into thermodynamic behavior of LA103Z Mg-Li alloy during turning based on modified Johnson-Cook model
    Chen, Zhijun
    Qian, Lingyun
    Ji, Baoping
    Liang, Yan
    Zhen, Huiqiang
    Zhang, Qingdong
    JOURNAL OF MANUFACTURING PROCESSES, 2023, 87 : 260 - 272
  • [40] COMPATIBILITY BETWEEN PAN-BASED CARBON-FIBERS AND MG8LI ALLOY DURING THE PRESSURE INFILTRATION PROCESS
    KUDELA, S
    GERGELY, V
    JANSCH, E
    HOFMANN, A
    BAUNACK, S
    OSWALD, S
    WETZIG, K
    JOURNAL OF MATERIALS SCIENCE, 1994, 29 (21) : 5576 - 5582