Decomposition of silica binder during infiltration of Saffil fiber preform with Mg and Mg-Li melts

被引:0
|
作者
Kudela, S., Jr. [1 ]
Izdinsky, K. [1 ]
Oswald, S. [2 ]
Ranachowski, P. [3 ]
Ranachowski, Z. [3 ]
Kudela, S. [1 ]
机构
[1] Slovak Acad Sci, Inst Mat & Machine Mech, Bratislava 83102, Slovakia
[2] IFW Dresden, Inst Complex Mat, D-01171 Dresden, Germany
[3] Polish Acad Sci, Inst Fundamental Technol Res, PL-02106 Warsaw, Poland
来源
KOVOVE MATERIALY-METALLIC MATERIALS | 2014年 / 52卷 / 04期
关键词
Mg-Li composites; Saffil fibers; silica binder; melt infiltration; XPS; FTIR; METAL-MATRIX COMPOSITES; SPECTROSCOPY; XPS; SURFACES; GLASSES; SYSTEM; MG2SI; PHASE;
D O I
10.4149/km_2014_4_183
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
Mg and Mg-Li matrix composites were prepared by the melt infiltration of fibrous preform consisting of Saffil alumina fibers and the silica binder. During this process there has occurred decomposition of silica binder and/or surface silica film by displacement redox reactions and the reaction products were characterized using SEM, TEM, SAED, FTIR and XPS techniques. The only reaction products found in Mg infiltrated Saffil preform were MgO and Mg2Si. In Mg-Li melt infiltrated Saffil preform there was found besides MgO and Mg2Si also the non-crystalline phase that appears to be the lithium silicate xLi(2)O center dot ySiO(2). Binary lithium silicides and ternary magnesium-lithium silicides were not detected.
引用
收藏
页码:183 / 188
页数:6
相关论文
共 43 条
  • [1] Saffil alumina fibers reinforced dual-phase Mg-Li and Mg-Li-Zn alloys
    Kudela, S., Jr.
    Svec, P.
    Bajana, O.
    Orovcik, L.
    Ranachowski, P.
    Ranachowski, Z.
    KOVOVE MATERIALY-METALLIC MATERIALS, 2017, 55 (03): : 195 - 203
  • [2] TENSILE AND CREEP DEFORMATION OF A FIBER REINFORCED MG-LI ALLOY
    WILCOX, BA
    CLAUER, AH
    JOURNAL OF METALS, 1969, 21 (03): : A56 - &
  • [3] TENSILE AND CREEP DEFORMATION OF A FIBER REINFORCED MG-LI ALLOY
    WILCOX, BA
    CLAUER, AH
    TRANSACTIONS OF THE METALLURGICAL SOCIETY OF AIME, 1969, 245 (05): : 935 - &
  • [4] Precipitation evolution during annealing of Mg-Li alloys
    Tang, Yan
    Jia, Weitao
    Liu, Xuan
    Lee, Qichi
    Cui, Jianzhong
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2017, 689 : 332 - 344
  • [5] Microstructure and texture evolution of Mg-Li alloy during rolling
    Cui, Chongliang
    Zhu, Tianlong
    Zhang, Tianlong
    Wu, Ruizhi
    Betsofen, Sergey
    Zhang, Jinghuai
    Zhang, Milin
    INTERNATIONAL JOURNAL OF MATERIALS RESEARCH, 2014, 105 (11) : 1111 - 1117
  • [6] Effect of wettability and powder premixing on the spontaneous infiltration of molten Mg into alumina fiber preform
    Shi, W
    Kobashi, M
    Choh, T
    ZEITSCHRIFT FUR METALLKUNDE, 1999, 90 (04): : 294 - 298
  • [7] Effect of wettability and powder premixing on the spontaneous infiltration of molten Mg into alumina fiber preform
    Shi, Wen
    Kobashi, Makoto
    Choh, Takao
    Zeitschrift fuer Metallkunde/Materials Research and Advanced Techniques, 1999, 90 (04): : 294 - 298
  • [8] Effect of Wettability and Powder Premixing on the Spontaneous Infiltration of Molten Mg into Alumina Fiber Preform
    Shi, Wen
    Kobashi, Makoto
    Choh, Takao
    International Journal of Materials Research, 1999, 90 (04): : 294 - 298
  • [9] Corrosion characteristics and protection of fiber metal laminates based on Mg-Li alloys
    Sun, Siqiang
    Pan, Yingcai
    Wu, Guoqing
    Wang, Xuanbo
    Zeng, Peng
    Hei, Lijie
    Wang, Liqiang
    MATERIALS RESEARCH EXPRESS, 2018, 5 (09):
  • [10] On the infiltration behavior of Al, Al-Li, and Mg melts through SiCp bed
    Murty, BS
    Thakur, SK
    Dhindaw, BK
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2000, 31 (01): : 319 - 325