Empirical models for specific energy consumption and optimization of cutting parameters for minimizing energy consumption during turning

被引：131

作者：

Velchev, Stefan ^{[1
]}

Kolev, Ivan ^{[1
]}

Ivanov, Krasimir ^{[1
]}

Gechevski, Simeon ^{[1
]}

机构：

[1] Univ Ruse, Fac Mech & Mfg Engn, Ruse 7017, Bulgaria

来源：

JOURNAL OF CLEANER PRODUCTION | 2014年 / 80卷

关键词：

Specific energy consumption; Energy model; Optimal cutting parameters; Minimum energy consumption; Turning; POWER-CONSUMPTION; REQUIREMENTS; EFFICIENCY;

D O I：

10.1016/j.jclepro.2014.05.099

中图分类号：

X [环境科学、安全科学];

学科分类号：

08 ; 0830 ;

摘要：

The article presents approach for optimization of cutting parameters for minimizing direct energy consumption during turning. Presented are the results of the experimental studies of the dependence of the specific energy consumption by material removal rate (MRR) when turning of steel using CNC lathes and an improved empirical model of this dependence. This model is used for the formulation of a model of direct energy consumption expressed by the cutting parameters. An equation for the optimal cutting speed is devised by applying the minimum energy criterion. The influences of the insert grade, of the feed and depth of cut on the minimum energy consumption have been found through numerical research. Recommendations for their selection have been made based on considerations for minimum energy during turning. (C) 2014 Elsevier Ltd. All rights reserved.

引用

页码：139 / 149

页数：11

共 50 条

[31] Minimizing Energy Consumption in Polymer Extrusion
Jinescu, Cosmin V.
[J]. MATERIALE PLASTICE, 2014, 51 (03) : 235 - 240
[32] The Effect of Cutting Parameters on Power Consumption during Turning Nickel Based Alloy
Nur, Rusdi
Noordin, M. Y.
Izman, S.
Kurniawan, D.
[J]. MATERIALS, INDUSTRIAL, AND MANUFACTURING ENGINEERING RESEARCH ADVANCES 1.1, 2014, 845 : 799 - 802
[33] Drum cutting specific energy consumption model built by cutting curves analysis
Dong, Gao Kui
Long, Du Chang
Xiang, Jiang Hong
[J]. Telkomnika - Indonesian Journal of Electrical Engineering, 2013, 11 (07): : 4122 - 4128
[34] Multi-objective Machining Parameters Optimization for Low Energy and Minimum Cutting Fluid Consumption
Ma, Feng
Zhang, Hua
Cao, Huajun
[J]. Jixie Gongcheng Xuebao/Journal of Mechanical Engineering, 2017, 53 (11): : 157 - 163
[35] Minimizing Energy Consumption with Probabilistic Distance Models in Wireless Sensor Networks
Zhuang, Yanyan
Pan, Jianping
Cai, Lin
[J]. 2010 PROCEEDINGS IEEE INFOCOM, 2010,
[36] Selection of optimum turning parameters based on cooperative optimization of minimum energy consumption and high surface quality
Xie, Nan
Zhou, Junfeng
Zheng, Beirong
[J]. 51ST CIRP CONFERENCE ON MANUFACTURING SYSTEMS, 2018, 72 : 1469 - 1474
[37] An empirical model for predicting energy consumption of manufacturing processes: a case of turning process
Li, W.
Kara, S.
[J]. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2011, 225 (B9) : 1636 - 1646
[38] Minimizing energy consumption in industries by cascade use of waste energy
Hayakawa, N
Wakazono, Y
Kato, T
Suzuoki, Y
Kaya, Y
[J]. IEEE TRANSACTIONS ON ENERGY CONVERSION, 1999, 14 (03) : 795 - 801
[39] A genetic algorithm for minimizing energy consumption in warehouses
Ene, Seval
Kucukoglu, Ilker
Aksoy, Asli
Ozturk, Nursel
[J]. ENERGY, 2016, 114 : 973 - 980
[40] Minimizing the Energy Consumption in Wireless Sensor Networks
Baadache, Abderrahmane
Adouane, Redha
[J]. AD HOC & SENSOR WIRELESS NETWORKS, 2015, 27 (3-4) : 223 - 237

← 1 2 3 4 5 →