Empirical models for specific energy consumption and optimization of cutting parameters for minimizing energy consumption during turning

被引:131
|
作者
Velchev, Stefan [1 ]
Kolev, Ivan [1 ]
Ivanov, Krasimir [1 ]
Gechevski, Simeon [1 ]
机构
[1] Univ Ruse, Fac Mech & Mfg Engn, Ruse 7017, Bulgaria
关键词
Specific energy consumption; Energy model; Optimal cutting parameters; Minimum energy consumption; Turning; POWER-CONSUMPTION; REQUIREMENTS; EFFICIENCY;
D O I
10.1016/j.jclepro.2014.05.099
中图分类号
X [环境科学、安全科学];
学科分类号
08 ; 0830 ;
摘要
The article presents approach for optimization of cutting parameters for minimizing direct energy consumption during turning. Presented are the results of the experimental studies of the dependence of the specific energy consumption by material removal rate (MRR) when turning of steel using CNC lathes and an improved empirical model of this dependence. This model is used for the formulation of a model of direct energy consumption expressed by the cutting parameters. An equation for the optimal cutting speed is devised by applying the minimum energy criterion. The influences of the insert grade, of the feed and depth of cut on the minimum energy consumption have been found through numerical research. Recommendations for their selection have been made based on considerations for minimum energy during turning. (C) 2014 Elsevier Ltd. All rights reserved.
引用
收藏
页码:139 / 149
页数:11
相关论文
共 50 条
  • [1] Optimization of process parameters for minimum energy consumption based on cutting specific energy consumption
    Deng, Zhaohui
    Zhang, Hua
    Fu, Yahui
    Wan, Linlin
    Liu, Wei
    [J]. JOURNAL OF CLEANER PRODUCTION, 2017, 166 : 1407 - 1414
  • [2] Optimization of cutting parameters for minimizing energy consumption in turning of AISI 6061 T6 using Taguchi methodology and ANOVA
    Camposeco-Negrete, Carmita
    [J]. JOURNAL OF CLEANER PRODUCTION, 2013, 53 : 195 - 203
  • [3] Minimizing the energy consumption of hole machining integrating the optimization of tool path and cutting parameters on CNC machines
    Feng, Chunhua
    Chen, Xiang
    Zhang, Jingyang
    Huang, Yugui
    Qu, Zibing
    [J]. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2022, 121 (1-2): : 215 - 228
  • [4] Minimizing the energy consumption of hole machining integrating the optimization of tool path and cutting parameters on CNC machines
    Chunhua Feng
    Xiang Chen
    Jingyang Zhang
    Yugui Huang
    Zibing Qu
    [J]. The International Journal of Advanced Manufacturing Technology, 2022, 121 : 215 - 228
  • [5] Optimization of cutting parameters using Response Surface Method for minimizing energy consumption and maximizing cutting quality in turning of AISI 6061 T6 aluminum
    Camposeco-Negrete, Carmita
    [J]. JOURNAL OF CLEANER PRODUCTION, 2015, 91 : 109 - 117
  • [6] Optimization of specific energy consumption in CNC turning of a hardened alloy steel roll at low cutting speeds
    Noor, Kashif
    Siddiqui, Mubashir Ali
    Syed, Amir Iqbal
    [J]. JOURNAL OF ENGINEERING DESIGN AND TECHNOLOGY, 2023,
  • [7] Prediction and optimization of hobbing parameters for minimizing energy consumption and gear geometric deviations
    Wang, Jun
    Dong, Jianpeng
    [J]. ADVANCES IN MECHANICAL ENGINEERING, 2024, 16 (04)
  • [8] Optimization of energy consumption response parameters for turning operation using Taguchi method
    Bilga, Paramjit Singh
    Singh, Sehijpal
    Kumar, Raman
    [J]. JOURNAL OF CLEANER PRODUCTION, 2016, 137 : 1406 - 1417
  • [9] Feature-based optimization method integrating sequencing and cutting parameters for minimizing energy consumption of CNC machine tools
    Feng, Chunhua
    Huang, Yugui
    Wu, Yilong
    Zhang, Jingyang
    [J]. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2022, 121 (1-2): : 503 - 515
  • [10] Feature-based optimization method integrating sequencing and cutting parameters for minimizing energy consumption of CNC machine tools
    Chunhua Feng
    Yugui Huang
    Yilong Wu
    Jingyang Zhang
    [J]. The International Journal of Advanced Manufacturing Technology, 2022, 121 : 503 - 515