ANALYSIS OF TEMPERATURE AND PLASTIC FLOW DURING FRICTION STIR SPOT WELDING USING PARTICLE METHOD WITH ELASTIC-PLASTIC MODEL

被引：0
|
作者：
Hirasawa, Shigeki [1 ]
Badarinarayan, Harsha [1 ]
Okamoto, Kazutaka [1 ]
Tomimura, Toshio [1 ]
机构：
[1] Kobe Univ, Dept Mech Engn, Kobe, Hyogo 6578501, Japan
来源：
IMECE 2008: HEAT TRANSFER, FLUID FLOWS, AND THERMAL SYSTEMS, VOL 10, PTS A-C | 2009年
关键词：
D O I：
暂无
中图分类号：
O414.1 [热力学];
学科分类号：
摘要：
Friction stir spot welding (FSSW) is a new metal-joining process, and a numerical simulation code to calculate optimal welding conditions is desired. In this paper, we analyzed temperature distribution and plastic flow during FSSW process by solving the elastic-plastic deformation equations using the particle method. Calculation results indicate that, temperature distribution is circler patterns and the temperature below the rotation tool is 300 degrees C at 0.7 s when the diameter of the tool is 8 mm and the rotation speed is 2500 rpm. The material of the metal plate near the outside of the tool protrudes to cause the burr. The calculation result is similar to our experimental result. Plastic flow pattern of material in the metal plate is obtained. The obtained complex flow pattern is important to mix metal material and the weld strength or FSSW. The length of the pin of the tool, the tool diameter, the tool rotation speed, and the tool plunge speed are important parameters for mixing of metal material. The mixing of metal material below the concave shoulder is strong.
引用
收藏
页码：1675 / 1682
页数：8
相关论文
共 50 条
  • [21] The piecewise parabolic method for elastic-plastic flow in solids
    Wei Zhang
    Cheng Chen
    Kun Liu
    Jing-Song Bai
    Ping Li
    Zhen-Hua Wan
    De-Jun Sun
    Scientific Reports, 8
  • [22] Development of a numerical model for friction stir welding by using particle method
    Miyasaka F.
    Yosetsu Gakkai Shi/Journal of the Japan Welding Society, 2019, 88 (03): : 180 - 182
  • [23] A free boundary problem for an elastic-plastic flow model
    Doronin, GG
    Souza, AJ
    HYPERBOLIC PROBLEMS: THEORY, NUMERICS, APPLICATIONS, VOL 1, 1999, 129 : 253 - 262
  • [24] A thermal-plastic model of friction stir welding in aluminum alloy
    Zhang Peilei
    Yan Hua
    Li Chonggui
    Yu Zhishui
    Lu Qinghua
    SCIENCE AND ENGINEERING OF COMPOSITE MATERIALS, 2017, 24 (03) : 439 - 446
  • [25] Friction analysis of microcosmic elastic-plastic contact for extrusion forming
    Wang, L. G.
    Sun, X. P.
    Huang, Y.
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2007, 187 : 631 - 634
  • [26] Analysis of the elastic-plastic problem involving finite plastic strain using the boundary element method
    Lorenzana, A
    Garrido, JA
    COMPUTERS & STRUCTURES, 1999, 73 (1-5) : 147 - 159
  • [27] Analysis of the elastic-plastic problem involving finite plastic strain using the boundary element method
    Lorenzana, A
    Pereda, J
    Garrido, JA
    ADVANCES IN BOUNDARY ELEMENT METHODS, 1996, : 53 - 63
  • [28] Friction analysis at elastic-plastic contact of rough surfaces using n-point asperity model
    Waghmare, Ajay K.
    Sahoo, Prasanta
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY, 2016, 230 (10) : 1258 - 1272
  • [29] Friction stir lap welding of plastic to metal using adjustable tool
    Gao, Y.
    Morisada, Y.
    Fujii, H.
    Liao, J.
    SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, 2020, 25 (03) : 190 - 197
  • [30] A Static Friction Model for Elastic-plastic Contacting Surfaces Using Statistically Homogenized Technique
    Zheng, Xiaoya
    Yu, Yuanfeng
    2018 THE 9TH ASIA CONFERENCE ON MECHANICAL AND AEROSPACE ENGINEERING, 2019, 1215
12345