Environmental evaluation of biomass pelleting using life cycle assessment

被引:69
|
作者
Kylili, Angeliki [1 ]
Christoforou, Elias [1 ]
Fokaides, Paris A. [1 ]
机构
[1] Frederick Univ, Sch Engn & Appl Sci, CY-1036 Nicosia, Cyprus
来源
BIOMASS & BIOENERGY | 2016年 / 84卷
关键词
Life cycle assessment; Pellets; Non-linear programming; Olive husk; WOOD PELLET; BRITISH-COLUMBIA; HEAT-PRODUCTION; POWER-PLANTS; BIOENERGY; QUALITY; RESIDUES; RESOURCES; LOCATION; IMPACT;
D O I
10.1016/j.biombioe.2015.11.018
中图分类号
S2 [农业工程];
学科分类号
0828 ;
摘要
The exploitation of biomass for energy production purposes can significantly reduce the environmental burdens associated with the highly criticized fossil fuelled energy production. Life cycle assessment (LCA) methodology has proven to be one of the most effective tools for carrying out environmental impact analysis of any process or system. The interpretation of the findings of LCA can be used as a basis for recommendations and decision making in accordance to the goal and scope definition. The aim of this paper is to conduct a comprehensive LCA for the environmental evaluation of the biomass pelleting process with the focus being on the transportation and manufacturing stages. To achieve this aim, four scenarios are presented, investigating the pelleting process of olive husk, an abundant waste biomass found in Cyprus. Two alternative scenarios are developed in an effort to compare the centralised and the decentralised management of olive husk. Regarding those two scenarios, a novel mathematical parametric model was developed and Non-Linear Programming was applied for the computation of the optimal locations for a set of management facilities which achieve the lowest energy needs for transportation purposes. Additionally, a third and fourth scenario aimed to the comparison of the potential improvement of the environmental footprint of the olive husk pellets with regard to their reference cases (Scenario 1 and 2 respectively), when Renewable Energy Sources (RES) are incorporated in the pelleting process system. The authors concluded that the selection of location for the biomass management centres, as well as the employment of renewable energy technologies (RET) for energy generation can significantly affect the environmental impact of biomass utilisation. The environmental impact of olive husk pellet production was improved by more than 85% in selected impact categories when RES were incorporated in the manufacturing stage. The comparison of centralised and decentralised scenarios for olive husk management has indicated the latter to be the most environment-friendly solution. (C) 2015 Elsevier Ltd. All rights reserved.
引用
收藏
页码:107 / 117
页数:11
相关论文
共 50 条
  • [21] Systematic assessment of triticale-based biorefinery strategies: environmental evaluation using life cycle assessment
    Liard, Gladys
    Lesage, Pascal
    Samson, Rejean
    Stuart, Paul R.
    [J]. BIOFUELS BIOPRODUCTS & BIOREFINING-BIOFPR, 2018, 12 : S60 - S72
  • [22] Life Cycle Assessment of Biomass Pyrolysis
    Dipali Gahane
    Divyajyoti Biswal
    Sachin A. Mandavgane
    [J]. BioEnergy Research, 2022, 15 : 1387 - 1406
  • [23] Life Cycle Assessment of Biomass Pyrolysis
    Gahane, Dipali
    Biswal, Divyajyoti
    Mandavgane, Sachin A.
    [J]. BIOENERGY RESEARCH, 2022, 15 (03) : 1387 - 1406
  • [24] Environmental Life Cycle Assessment
    Weidema, Bo
    Brandao, Miguel
    [J]. JOURNAL OF INDUSTRIAL ECOLOGY, 2020, 24 (03) : 726 - 730
  • [25] Environmental impact assessment of green roofs using life cycle assessment
    Rasul, M. G.
    Arutla, L. K. R.
    [J]. ENERGY REPORTS, 2020, 6 : 503 - 508
  • [26] Environmental Assessment of a Solar Tower Using the Life Cycle Assessment (LCA)
    Cavallaro, Fausto
    Marino, Domenico
    Streimikiene, Dalia
    [J]. NEW METROPOLITAN PERSPECTIVES: LOCAL KNOWLEDGE AND INNOVATION DYNAMICS TOWARDS TERRITORY ATTRACTIVENESS THROUGH THE IMPLEMENTATION OF HORIZON/E2020/AGENDA2030, VOL 2, 2019, 101 : 621 - 628
  • [27] Evaluation of environmental impact and benefits for remanufactured construction equipment parts using Life Cycle Assessment
    Jun, Yong-Sung
    Kang, Hong-Yoon
    Jo, Hyun-Jung
    Baek, Chun-Youl
    Kim, Young-Chun
    [J]. SUSTAINABLE MANUFACTURING FOR GLOBAL CIRCULAR ECONOMY, 2019, 33 : 288 - 295
  • [28] EVALUATION OF ENVIRONMENTAL IMPACTS AND GHG OF PALM POLYOL PRODUCTION USING LIFE CYCLE ASSESSMENT APPROACH
    Zolkarnain, Noorazah
    Yusoff, Sumiani
    Subramaniam, Vijaya
    Abd Maurad, Zulina
    Abu Bakar, Zailan
    Ghazali, Razmah
    Abu Hassan, Hazimah
    [J]. JOURNAL OF OIL PALM RESEARCH, 2015, 27 (02): : 144 - 155
  • [29] Evaluation of environmental impacts of cotton polo shirt production in Bangladesh using life cycle assessment
    Islam, Shafiqul
    Hasan, A. K. M. Mehedi
    Bhuiyan, Muhammad Abdur Rahman
    Bhat, Gajanan
    [J]. SCIENCE OF THE TOTAL ENVIRONMENT, 2024, 926
  • [30] Evaluation of the environmental impact of experimental cubicles using Life Cycle Assessment: A highlight on the manufacturing phase
    Menoufi, Karim
    Castell, Albert
    Navarro, Lidia
    Perez, Gabriel
    Boer, Dieter
    Cabeza, Luisa F.
    [J]. APPLIED ENERGY, 2012, 92 : 534 - 544