Reverse Synchronous Transmission of Electrical Signals Based on Parallel Injection and Series Pickup

To eliminate the interference with the transmission of electrical signals, this paper puts forward a reverse synchronous transmission (RST) control method based on parallel injection and series pickup. Firstly, the synchronous transmission mechanism of electrical signals was analyzed, followed by the design of the framework and workflow of signal transmission. Next, an RST channel model was established for electrical signals, and the transmission parameters were configured based on the transmission properties of these signals. Through alternative current (AC) impedance analysis, the Laplace transform was performed on the transmission loop to increase the voltage of the transmission channel, and to elevate the signal-to-noise ratio (SNR) of the voltage across the resistor. Finally, the voltage comparator was adopted to obtain the digital information of the baseband signal, and the power signal was transmitted to the RST channel, completing the RST control of electrical signals. The experimental results show that the transmission speed of the system was 0.7488, and the reverse transmission of electrical signals was only delayed by 5ms, when the intensity of electromagnetic radiation was 2.0 mu T. Through parallel injection and series pickup, the proposed system can effectively realize the RST of electrical signals, without changing the topology of the transmission system.