Modification effect of Ni-38 wt.%Si on Al-12 wt.%Si alloy

被引:3
|
作者
Wu Yuying [1 ]
Liu Xiangfa [1 ,2 ]
Jiang Binggang [1 ]
Huang Chuanzhen [3 ]
机构
[1] Shandong Univ, Minist Educ, Key Lab Liquid Struct & Hered Mat, Jinan 250061, Peoples R China
[2] Shandong Binzhou Bohai Piston Co Ltd, Binzhou 256602, Shandong, Peoples R China
[3] Shandong Univ, Sch Mech Engn, Jinan 250061, Peoples R China
关键词
Metals; Casting; X-ray diffraction; Anisotropy; Thermal analysis; AL-SI; MEDIUM-RANGE; NUCLEATION; LIQUID; ORDER; THIN;
D O I
10.1016/j.jallcom.2008.09.140
中图分类号
O64 [物理化学(理论化学)、化学物理学];
学科分类号
070304 ; 081704 ;
摘要
Modification effect of Ni-38 wt.%Si on the Al-12 wt.%Si alloy has been studied by differential scanning calorimeter, torsional oscillation viscometer and liquid X-ray diffraction experiments. It is found that there is a modification effect of Ni-38 wt.%Si on Al-12 wt.%Si alloy, i.e. primary Si can precipitate in the microstructure of Al-12 wt.%Si alloy when Ni and Si added in the form of Ni-38 wt.%Si, but not separately. Ni-38 wt.%Si alloy brings "genetic materials" into the Al-Si melt, which makes I he melt to form more ordering structure, promotes the primary Si precipitated. Moreover, the addition of Ni-38 wt.%Si, which decreases the solidification supercooling degree of Al-12 wt.%Si alloy, is identical to the effect of heterogeneous nuclei. (C) 2008 Elsevier B.V. All rights reserved.
引用
收藏
页码:118 / 122
页数:5
相关论文
共 50 条
  • [31] Effect of friction stir processing on grain refinement and superplastic properties of binary Al-8 wt.% Si to Al-30 wt.% Si alloys
    Singh, Kuldeep
    Hussain, Muhammad Imtiaz
    Pancholi, Vivek
    Kashyap, Bhagwati P.
    PHILOSOPHICAL MAGAZINE, 2025, 105 (04) : 229 - 260
  • [32] The influence of oxide inclusions on the fluidity of Al-7 wt.%Si alloy
    Di Sabatino, M
    Arnberg, L
    Rorvik, S
    Prestmo, A
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2005, 413 : 272 - 276
  • [33] The stored energy in processed Cu-0.4 wt.%Cr-0.12 wt.%Zr-0.02 wt.%Si-0.05 wt.%Mg
    Li, X. F.
    Dong, A. P.
    Wang, L. T.
    Yu, Z.
    Meng, L.
    JOURNAL OF ALLOYS AND COMPOUNDS, 2011, 509 (14) : 4670 - 4675
  • [34] EFFECT OF HIGH PRESSURE ON THE SOLIDIFICATION OF Al AND Al-25. 4 Wt. % Si ALLOY.
    Nishida, Yoshinori
    Matsubara, Hiromi
    Zeitschrift fuer Metallkunde/Materials Research and Advanced Techniques, 1980, 71 (03): : 189 - 194
  • [35] Bainitic precipitation in the Cu-9 wt.%Al-4 wt.%Mn-5 wt.%Ag alloy
    Adorno, A. T.
    Carvalho, T. M.
    Magdalena, A. G.
    dos Santos, C. M. A.
    Silva, R. A. G.
    JOURNAL OF ALLOYS AND COMPOUNDS, 2014, 615 : S153 - S155
  • [36] The Influence of the Addition of 4.5 wt.% of Copper on Wear Properties of Al-12Si Eutectic Alloy
    Channappagoudar, Shivaprasad
    Aithal, Kiran
    Sannayallappa, Narendranath
    Desai, Vijay
    Mukunda, Pudukottah Gopaliengar
    JORDAN JOURNAL OF MECHANICAL AND INDUSTRIAL ENGINEERING, 2015, 9 (03): : 217 - 221
  • [37] Thermal stability of heavily drawn Cu-0.4 wt.%Cr-0.12 wt.%Zr-0.02 wt.%Si-0.05 wt.%Mg
    Li, X. F.
    Dong, A. P.
    Wang, L. T.
    Yu, Z.
    Meng, L.
    JOURNAL OF ALLOYS AND COMPOUNDS, 2011, 509 (10) : 4092 - 4097
  • [38] The influence of the addition of 4.5 wt.% of copper on wear properties of Al-12Si eutectic alloy
    Dept. of Mechanical Engineering, National Institute of Technology, Surathkal, India
    不详
    Jordan J. Mech. Ind. Eng., 3 (217-221):
  • [39] Rapidly solidified Al-6.5 wt.% Ni alloy
    Gögebakan, M
    Uzun, O
    Karaaslan, T
    Keskin, M
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2003, 142 (01) : 87 - 92
  • [40] Melt spinning of Ni-12.5 wt.%Al alloy
    Torkar, M
    Sustarsic, B
    MATERIALS AND MANUFACTURING PROCESSES, 1997, 12 (03) : 409 - 416