Mathematical modelling of solid oxide fuel cell using Matlab/Simulink

被引：0
|
作者：
Lakshmi, T. V. V. S. [1 ]
Geethanjali, P. [1 ]
Prasad, Krishna [1 ]
机构：
[1] VIT Univ, Sch Elect Engn, Vellore, Tamil Nadu, India
来源：
2013 ANNUAL INTERNATIONAL CONFERENCE ON EMERGING RESEARCH AREAS & 2013 INTERNATIONAL CONFERENCE ON MICROELECTRONICS, COMMUNICATIONS & RENEWABLE ENERGY (AICERA/ICMICR) | 2013年
关键词：
Solid Oxide Fuel Cell; simulation; transfer function model;
D O I：
暂无
中图分类号：
TE [石油、天然气工业]; TK [能源与动力工程];
学科分类号：
0807 ; 0820 ;
摘要：
This paper explicates a phenomenal approach for computer modeling of a single cell solid oxide fuel cell where transfer function model is implemented for the calculation of partial pressures of hydrogen, oxygen and water. Activation, concentration and ohmic losses are also considered to obtain better characteristics of fuel cell. Steady state characteristics of fuel cell are obtained at different fuel flow rates ranging from 31ml/sec to 51ml/sec at two different operating temperatures 800 degrees C and 850 degrees C. It is observed that the limiting current density of fuel cell increases with the increase in fuel flow rate. Results are validated with the experimental data. The software that has been incorporated in designing is MATLAB/SIMULINK.
引用
收藏
页数：5
相关论文
共 50 条
  • [31] Mathematical Modelling and Analysis of Graphene Using Simulink Technique
    Tripathi, Pragati
    Urooj, Shabana
    EMERGING TRENDS IN EXPERT APPLICATIONS AND SECURITY, 2019, 841 : 417 - 424
  • [32] Biomass solid oxide fuel cell using solid weed waste as fuel
    Hibino, Takashi
    Kobayashi, Kazuyo
    Hitomi, Takuma
    ELECTROCHIMICA ACTA, 2021, 388
  • [33] Modelling HEUI injector in MATLAB simulink
    Tran, XT
    Milton, B
    White, T
    Tordon, M
    PROCEEDINGS OF THE 2003 IEEE/ASME INTERNATIONAL CONFERENCE ON ADVANCED INTELLIGENT MECHATRONICS (AIM 2003), VOLS 1 AND 2, 2003, : 383 - 388
  • [34] A review on mathematical modelling of Direct Internal Reforming- Solid Oxide Fuel Cells
    Faheem, Hafiz Hamza
    Abbas, Syed Zaheer
    Tabish, Asif Nadeem
    Fan, Liyuan
    Maqbool, Fahad
    JOURNAL OF POWER SOURCES, 2022, 520
  • [35] PEM Fuel Cell and Battery Hybrid System Studied In Matlab/Simulink
    Lian Dibo
    Feng Xiaoyun
    Li Shuichang
    Gu Bochuan
    2009 IEEE 6TH INTERNATIONAL POWER ELECTRONICS AND MOTION CONTROL CONFERENCE, VOLS 1-4, 2009, : 1520 - 1524
  • [36] Mathematical modelling and experimental validation of an anode-supported tubular solid oxide fuel cell for heat and power generation
    Tonekabonimoghadam, S.
    Akikur, R. K.
    Hussain, M. A.
    Hajimolana, S.
    Saidur, R.
    Ping, H. W.
    Chakrabarti, M. H.
    Brandon, N. P.
    Aravind, P. V.
    Nayagar, J. N. S.
    Hashim, M. A.
    ENERGY, 2015, 90 : 1759 - 1768
  • [37] MATLAB/Simulink Mathematical Model for Lung and Ventilator
    Jaber, Mohammad
    Hamawy, Lara
    Hajj-Hassan, Mohamad
    Abou Ali, Mohamad
    Kassem, Abdallah
    2020 32ND INTERNATIONAL CONFERENCE ON MICROELECTRONICS (ICM), 2020, : 31 - 35
  • [38] ARX modelling and model predictive control for solid oxide fuel cell
    Huo, Haibo
    Huo, Haie
    Chen, Yunlan
    Kuang, Xinghong
    Li, Junjun
    Wu, Yanxiang
    INTERNATIONAL JOURNAL OF MODELLING IDENTIFICATION AND CONTROL, 2013, 20 (01) : 74 - 81
  • [39] Multiphysical modelling of planar solid oxide fuel cell stack layers
    Russner, N.
    Dierickx, S.
    Weber, A.
    Reimert, R.
    Ivers-Tiffee, E.
    JOURNAL OF POWER SOURCES, 2020, 451 (451)
  • [40] Solid Oxide Fuel Cell Performance Analysis through Local Modelling
    Bianchi, Fiammetta Rita
    Spotorno, Roberto
    Piccardo, Paolo
    Bosio, Barbara
    CATALYSTS, 2020, 10 (05)
12345