Temperature calculation in cutting zones

被引：28

作者：

Moehring, Hans-Christian ^{[1
]}

Kushner, Valerii ^{[2
]}

Storchak, Michael ^{[1
]}

Stehle, Thomas ^{[1
]}

机构：

[1] Univ Stuttgart, Inst Machine Tools, Stuttgart, Germany

[2] Omsk State Tech Univ, Dept Mech Engn & Mat Sci, Omsk, Russia

来源：

CIRP ANNALS-MANUFACTURING TECHNOLOGY | 2018年 / 67卷 / 01期

关键词：

Cutting; Temperature; Modelling; MATERIAL RESISTANCE; PREDICTION;

D O I：

10.1016/j.cirp.2018.03.009

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

This paper presents methods for refining the calculation of cutting temperatures. The heat flow densities and temperatures in the chip forming area, the accumulation zone and the area of the plastic contact between chip and tool affect the cutting temperature considerably. The new method takes the heat distribution for moving sources into account. The temperature in the contact between the flank face and the workpiece is calculated considering how friction and the accumulation zone affect the cutting temperature in the tertiary cutting zone. The methods incorporate material softening during temperature increase. The models are verified by experimental analyses. (C) 2018 Published by Elsevier Ltd on behalf of CIRP.

引用

页码：61 / 64

页数：4

共 50 条

[21] A numerical and experimental investigation of the deformation zones and the corresponding cutting forces in orthogonal cutting
Agmell, Mathias
Ahadi, Aylin
Stahl, Jan-Eric
MODELLING OF MACHINING OPERATIONS, 2011, 223 : 152 - 161
[22] FRESNEL ZONES CALCULATION .2.
SHOUCRI, RM
PAQUET, C
APPLIED OPTICS, 1976, 15 (05): : 1210 - 1211
[23] CALCULATION OF THE GEOMETRY OF SHIP COLLISION ZONES
LAMB, WGP
JOURNAL OF NAVIGATION, 1989, 42 (02): : 298 - 305
[24] THE FORMULAS FOR THE CALCULATION OF THE FRESNEL ZONES OR VOLUMES
GELCHINSKY, B
JOURNAL OF GEOPHYSICS-ZEITSCHRIFT FUR GEOPHYSIK, 1985, 57 (01): : 33 - 41
[25] Calculation of isoelectric zones and isoelectric points
Hitchcock, DI
JOURNAL OF BIOLOGICAL CHEMISTRY, 1936, 114 (02) : 373 - 379
[26] Cutting temperature in various cutting processes
Shibasaka, T.
Moriwaki, T.
Annals of DAAAM for 2003 & Proceedings of the 14th International DAAAM Symposium: INTELLIGENT MANUFACTURING & AUTOMATION: FOCUS ON RECONSTRUCTION AND DEVELOPMENT, 2003, : 411 - 412
[27] CUTTING TEMPERATURE IN INTERMITTENT CUTTING.
Palmai, Z.
Periodica Polytechnica Mechanical Engineering, 1987, 31 (01): : 61 - 78
[28] CALCULATION OF NOZZLES OF CUTTING TORCHES FOR AIR ARC-CUTTING
MILYUTIN, VS
WELDING PRODUCTION, 1977, 24 (06): : 48 - 50
[29] Calculation of cutting angle and cutting force in face gear machining
Guan R.
Huang Y.
Chen R.
Wang Y.
Beijing Hangkong Hangtian Daxue Xuebao/Journal of Beijing University of Aeronautics and Astronautics, 2023, 49 (08): : 1922 - 1929
[30] Calculation of orifices of hydraulic cutting tools
Mukhametzyanov, I.Z.
Sergeev, G.A.
Voronov, V.G.
Chemical and Petroleum Engineering, 1988, 24 (3-4) : 106 - 108

← 1 2 3 4 5 →