The effect of roughness parameter on the performance of hydrodynamic journal bearings with rough surfaces

被引：38

作者：

Turaga, R ^{[1
]}

Sekhar, AS ^{[1
]}

Majumdar, BC ^{[1
]}

机构：

[1] Indian Inst Technol, Dept Mech Engn, Kharagpur 721302, W Bengal, India

来源：

TRIBOLOGY INTERNATIONAL | 1999年 / 32卷 / 05期

关键词：

roughness; stability; stochastic FEM;

D O I：

10.1016/S0301-679X(99)00035-3

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

The influence of the roughness parameter (C) and the roughness patterns (longitudinal, transverse and isotropic) on the steady state and dynamic characteristics of hydrodynamic journal bearings with rough surfaces has been studied using the model of Christensen and Tender (The hydrodynamic lubrication of rough journal bearings. Trans. ASME, Journal of Lubrication: Technology 1973;95:166-72). Reynolds-type equations have been solved using the stochastic finite method. It is seen that the transverse roughness tends to increase significantly load carrying capacity and stability with roughness values, whereas in the case of other roughness patterns the effect is seen to be very small. (C) 1999 Elsevier Science Ltd. All rights reserved.

引用

页码：231 / 236

页数：6

共 50 条

[21] Stability analysis of a rigid rotor supported on hydrodynamic journal bearings with rough surfaces using the stochastic finite element method
Indian Inst of Technology, Kharagpur, India
Proc Inst Mech Eng Part J, 2 (121-130):
[22] Stability analysis of a rigid rotor supported on hydrodynamic journal bearings with rough surfaces using the stochastic finite element method
Turaga, R
Sekhar, AS
Majumdar, BC
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY, 1998, 212 (J2) : 121 - 130
[23] SELECTION OF MATERIALS FOR LUBRICATED JOURNAL BEARINGS - DETERMINATION OF CRITICAL ROUGHNESS PARAMETER
DEGEE, AWJ
WEAR, 1977, 42 (02) : 251 - 261
[24] Performance characteristics of journal bearings (porous type): A coupled solution using Hartmann number and roughness parameter
Kalavathi, G. K.
Najar, F. A.
Vasundhara, M. G.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY, 2020, 234 (05) : 668 - 675
[25] Effect of composite textured rough surfaces on the lubrication performance of cylindrical roller bearings
Deng, Linfeng
Su, Jie
Jin, Zeyuan
INDUSTRIAL LUBRICATION AND TRIBOLOGY, 2024, 76 (06) : 852 - 863
[26] ADIABATIC SOLUTIONS OF FINITE-WIDTH JOURNAL BEARINGS WITH ROUGH SURFACES
JANG, JY
CHENG, MJ
LIN, JF
TRIBOLOGY INTERNATIONAL, 1991, 24 (06) : 373 - 380
[27] Axial wedge effect in tilted hydrodynamic journal bearings
Zachariadis, Demetrio C.
TRIBOLOGY TRANSACTIONS, 2008, 51 (02) : 173 - 181
[28] The effect of journal roughness and foil coatings on the performance of heavily loaded foil air bearings
Radil, KC
Dellacorte, C
TRIBOLOGY TRANSACTIONS, 2002, 45 (02) : 199 - 204
[29] Effect of contamination on the performance of hydrodynamic bearings
Khonsari, M. M.
Booser, E. R.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY, 2006, 220 (J5) : 419 - 428
[30] Stochastic FEM model of one-dimensional hydrodynamic bearings with rough surfaces
Department of Mechanical Engineering, Indian Institute of Technology, Kharagpur-721302, India
Wear, 1-2 (221-227):

← 1 2 3 4 5 →