Investigation of OPET performance using GATE, a Geant4-based simulation software

A combined Optical Positron Emission Tomography (OPET) system is capable of both optical and PET imaging in the same setting and it can provide information/interpretation not possible in single mode imaging. The scintillator array here serves the dual function of coupling the optical signal from bioluminescence/fluorescence to the photodetector and also of channeling optical scintillations from the gamma rays. Here we report simulation results of the PET part of OPET using GATE, a Geant4 simulation package. The purpose of this investigation is the definition of the geometric parameters of the OPET tomograph. OPET is composed of six detector blocks arranged in a hexagonal ring shaped pattern with an inner radius of 15.4 mm. Each detector consists of a 2D array of 8x8 scintillator crystals each measuring 2x2x10 mm(3). Monte Carlo simulations were performed using the GATE software to measure absolute sensitivity, depth of interaction, and spatial resolution for two ring configurations, with and without gantry rotations, two crystal materials, and several crystal lengths. Images were reconstructed with Filtered Backprojection after angular interleaving and transverse ID interpolation of the sinogram. We report absolute sensitivities nearly seven times that of the prototype microPET at the center of FOV and averages of 2.0 mm tangential and 2.3 mm radial resolutions with gantry rotations up to an 8.0 mm offset. These performance parameters indicate that the imaging spatial resolution and sensitivity of the OPET system will be suitable for high resolution and high sensitivity small animal PET imaging.