Effect of moisture content on the properties of silanized jute-epoxy composites

被引:106
|
作者
Gassan, J [1 ]
Bledzki, AK [1 ]
机构
[1] UNIV GESAMTHSCH KASSEL,INST WERKSTOFFTECH KUNSTSTOFF & RECYCLINGTECH,D-34109 KASSEL,GERMANY
关键词
D O I
10.1002/pc.10272
中图分类号
TB33 [复合材料];
学科分类号
摘要
The composites investigated in this article were epoxy resins reinforced with jute-fibers. The jute-fibers were modified with an epoxyfunctional-gamma-glycidoxypropyltrimethoxy-silane (A-187 from Osi-Specialtis GmbH, Germany), which works as a coupling agent between fiber and matrix. The introduction of the coupling agent distinctly influences the mechanical properties of the composite: Dynamic modulus was doubled, damping was reduced by about 50%, and the Wohler curves showed fatigue limits increased by about 20%. The investigations pointed out further that the moisture uptake of composites with silanized fibers was reduced by about 10-20%. Moisture at equilibrium and kinetics of absorption increase with increasing fiber content. Finally, the application of the coupling agent caused a reduction of moisture effects on mechanical properties. Tensile strength, tensile modulus, and fatigue strength under repeated tensile stress were reduced up to 30%. This tendency was not duplicated in the results for flexural strength and flexural modulus.
引用
收藏
页码:179 / 184
页数:6
相关论文
共 50 条
  • [1] Effect of moisture content on the properties of silanized jute-epoxy composites
    Gassan, Jochen
    Bledzki, Andrzej K.
    [J]. Polymer Composites, 1997, 18 (02): : 179 - 184
  • [2] Effect of cyclic moisture absorption desorption on the mechanical properties of silanized jute-epoxy composites
    Gassan, J
    Bledzki, AK
    [J]. POLYMER COMPOSITES, 1999, 20 (04) : 604 - 611
  • [3] Jute-polyester and jute-epoxy composites - A comparative analysis
    Sahoo, S.
    Ishiaku, U. S.
    Nakai, A.
    Hamada, H.
    [J]. DESIGN, MANUFACTURING AND APPLICATIONS OF COMPOSITES, 2006, : 22 - 30
  • [4] A study on moisture absorption and swelling in bio-based jute-epoxy composites
    Masoodi, Reza
    Pillai, Krishna M.
    [J]. JOURNAL OF REINFORCED PLASTICS AND COMPOSITES, 2012, 31 (05) : 285 - 294
  • [5] Preparation, Mechanical and Electrical Properties of Glass and Jute-Epoxy/Epoxy Polyurethane Composites
    Adroja, Pooja P.
    Koradiya, S. B.
    Patel, J. P.
    Parsania, P. H.
    [J]. POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING, 2011, 50 (09) : 937 - 940
  • [6] A study on mechanical performance of jute-epoxy composites
    Mishra, HK
    Dash, BN
    Tripathy, SS
    Padhi, BN
    [J]. POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING, 2000, 39 (01) : 187 - 198
  • [7] Effect of moisture content of jute fabric and hybridization structure on the impact properties of jute and jute/glass hybrid composites
    Yu, Ying
    Yang, Yuqiu
    Tanabe, Kazuo
    Mastuda, Mitsuo
    Hamada, Hiroyuki
    [J]. SCIENCE AND ENGINEERING OF COMPOSITE MATERIALS, 2016, 23 (04) : 367 - 374
  • [8] Tensile Strength and Water Absorption Behavior of Recycled Jute-Epoxy Composites
    Wang, Sihan
    Masoodi, Reza
    Brady, Janet
    George, Brian R.
    [J]. JOURNAL OF RENEWABLE MATERIALS, 2013, 1 (04) : 279 - 288
  • [9] Ballistic Impact Study on Jute-Epoxy and Natural Rubber Sandwich Composites
    Sangamesh
    Ravishankar, K. S.
    Kulkarni, S. M.
    [J]. MATERIALS TODAY-PROCEEDINGS, 2018, 5 (02) : 6916 - 6923
  • [10] Effect of Moisture Absorption on the Mechanical Properties of Ceramic Filled Jute/Epoxy Hybrid Composites
    Swain, Priyadarshi Tapas Ranjan
    Biswas, Sandhyarani
    [J]. NATIONAL CONFERENCE ON PROCESSING AND CHARACTERIZATION OF MATERIALS (NCPCM), 2017, 178