A comparison of the spectral properties of high temperature annealed long period gratings inscribed by fs laser, UV and fusion-arc

被引：2

作者：

Allsop, T. ^{[1
]}

Dubov, M. ^{[1
]}

Dobb, H. ^{[1
]}

Main, A. ^{[1
]}

Martinez, A. ^{[1
]}

Kalli, K. ^{[2
]}

Webb, D. J. ^{[1
]}

Bennion, I. ^{[1
]}

机构：

[1] Aston Univ, Photon Res Grp, Aston Triangle, Birmingham B4 7ET, W Midlands, England

[2] Higher Tech Inst, Nicosia 2152, Cyprus

来源：

RELIABILITY OF OPTICAL FIBER COMPONENTS, DEVICES, SYSTEMS, AND NETWORKS III | 2006年 / 6193卷

关键词：

long-period fibre gratings; temperature stability; polarisation dependence;

D O I：

10.1117/12.663000

中图分类号：

O43 [光学];

学科分类号：

070207 ; 0803 ;

摘要：

Long period gratings have been inscribed in standard single mode fibre using a fs laser system, a fusion arc and a UV laser and a comparative study carried out of their thermal behaviour. The fs laser induced gratings can survive temperatures in excess of 800 degrees C, however the inscription process can induce considerable birefringence within the device. Annealing studies have been carried out showing that below 600 degrees C, all three grating types show a blue shift in their room temperature resonance wavelengths following cyclic heating, while above 600 degrees C, the UV and are induced LPGs exhibit a red shift, with the fs LPG showing an even stronger blue shift. High temperature annealing is also shown to considerably reduce the birefringence induced by the fs inscription process.

引用

页数：9

共 35 条

[11] Characterizations at very high temperature of electric arc-induced long-period fiber gratings
Humbert, G
Malki, A
[J]. OPTICS COMMUNICATIONS, 2002, 208 (4-6) : 329 - 335
[12] High-temperature stability of long-period fiber gratings produced using an electric arc
Rego, G
Okhotnikov, O
Dianov, E
Sulimov, V
[J]. JOURNAL OF LIGHTWAVE TECHNOLOGY, 2001, 19 (10) : 1574 - 1579
[13] Temperature sensitivity of long-period gratings inscribed with a CO2 laser in optical fiber with graded-index cladding
Chomat, Miroslav
Ctyroky, Jiri
Berkova, Daniela
Matejec, Vlastimil
Kanka, Jiri
Skokankova, Jana
Todorov, Filip
Jancarek, Alexandr
Bittner, Petr
[J]. SENSORS AND ACTUATORS B-CHEMICAL, 2006, 119 (02): : 642 - 650
[14] Effect of high-temperature plasma-deposited nano-overlays on the properties of long-period gratings written with UV and electric arc in non-hydrogenated fibers
Smietana, M.
Bock, W. J.
Mikulic, P.
[J]. MEASUREMENT SCIENCE AND TECHNOLOGY, 2013, 24 (09)
[15] High Sensitivity Cryogenic Temperature Sensors Based on Arc-Induced Long-Period Fiber Gratings
Ivanov, Oleg, V
Caldas, Paulo
Rego, Gaspar
[J]. SENSORS, 2022, 22 (19)
[16] Investigation of long-period fiber gratings induced by high-intensity femtosecond UV laser pulses
Kalachev, AI
Pureur, V
Nikogosyan, DN
[J]. OPTICS COMMUNICATIONS, 2005, 246 (1-3) : 107 - 115
[17] Investigation of long-period fiber gratings recorded by high-intensity femtosecond UV laser pulses
Kalachev, AI
Pureur, V
Slattery, SA
Nikogosyan, DN
[J]. 17th International Conference on Optical Fibre Sensors, Pts 1 and 2, 2005, 5855 : 330 - 333
[18] TEMPERATURE-DEPENDENT SPECTRAL RESPONSE OF ARC-INDUCED LONG-PERIOD FIBER GRATINGS ACCOMPANIED WITH ACRYLIC COATING
Sakata, H.
Kimbara, R.
[J]. MICROWAVE AND OPTICAL TECHNOLOGY LETTERS, 2017, 59 (06) : 1288 - 1291
[19] Improved femtosecond laser fabrication of long period fiber gratings and corresponding applications in high temperature measurement
[J]. Sun, Xiao-Yan, 1859, Board of Optronics Lasers (25):
[20] Annealing time dependence at very high temperature of electric arc-induced long-period fibre gratings
Humbert, G
Malki, A
[J]. ELECTRONICS LETTERS, 2002, 38 (10) : 449 - 450

← 1 2 3 4 →