Study On Siltation Of Lianyungang Port Based On 3D Numerical Simulation Technique

被引：0

作者：

Zhao Zhangyi ^{[1
]}

Pang Qixiu ^{[1
]}

机构：

[1] Minist Transport, Tianjin Res Inst Water Transport Engn, Key Lab Engn Sediment, MOT, Tianjin 300456, Peoples R China

来源：

2019 INTERNATIONAL CONFERENCE ON ROBOTS & INTELLIGENT SYSTEM (ICRIS 2019) | 2019年

关键词：

Lianyungang port; the strength of sediment siltation; 3D numerical simulation; typhoon; MODEL;

D O I：

10.1109/ICRIS.2019.00123

中图分类号：

TP18 [人工智能理论];

学科分类号：

081104 ; 0812 ; 0835 ; 1405 ;

摘要：

The siltation in Lianyungang port is studied by the three-dimensional numerical simulation technique. The results show that: 1. The sediment in the port mainly comes from the silt of the nearshore and shoals. Under the combined action of wind, wave and currents, the sediment is suspended and transported, and the suspended sediment gradually siltes along the channel, and the position of maximum sediment thickness point at the entrance. 2. Through the mathematical model calculation, the monthly silting strength of Qitai, Mianling and Xugou port is determined. In addition, the silt will be aggravated by the wind or typhoon weather conditions, and the sediment thickness of each port can be revised according to the results of the study.

引用

页码：470 / 473

页数：4

共 50 条

[21] An ALE Based FE Formulation for the 3D Numerical Simulation of Fineblanking Processes
Manopulo, Niko
Tong, Longchang
Hora, Pavel
14TH INTERNATIONAL CONFERENCE ON MATERIAL FORMING ESAFORM, 2011 PROCEEDINGS, 2011, 1353 : 1209 - 1214
[22] Optimization of 3D printed geocells based on numerical simulation and experimental investigation
Amurane, Izidine
Zhang, Mengxi
Li, Tianyi
Jiang, Haibo
2018 INTERNATIONAL CONFERENCE ON CONSTRUCTION, AVIATION AND ENVIRONMENTAL ENGINEERING, 2019, 233
[23] Numerical simulation of 3D plastic injection molding based on PG methods
Huazhong University of Science and Technology, Wuhan 430074, China
Zhongguo Jixie Gongcheng, 2007, 1 (80-82):
[24] Numerical simulation of the filling stage in injection molding based on a 3D model
耿铁
李德群
周华民
Journal of Harbin Institute of Technology, 2005, (02) : 129 - 133
[25] Numerical simulation of 3D turbulent bend flow based on unstructured grids
Lv, Suiju
Gao, Feng
Li, Chunguang
INTERNATIONAL JOURNAL OF HEAT AND TECHNOLOGY, 2018, 36 (03) : 1037 - 1046
[26] Numerical Prediction Approach of Cavitation Erosion based on 3D Simulation Flow
Taher, A. Bel Hadj
Kanfoudi, H.
Zgolli, R.
JOURNAL OF APPLIED FLUID MECHANICS, 2022, 15 (04) : 1165 - 1177
[27] 3D numerical simulation of novel SOI MOSFET based gas sensors
Setiadi, D
Udrea, F
Milne, WI
Covington, J
Gardner, JW
CHEMICAL SENSORS IV, PROCEEDINGS OF THE SYMPOSIUM, 1999, 99 (23): : 416 - 419
[28] Numerical simulation of 3D fluidized bed biomass gasification based on CPFD
Ren X.
Chen Q.
Yang H.
Zhang S.
Wang X.
Chen H.
Huagong Xuebao/CIESC Journal, 2020, 71 (12): : 5763 - 5773
[29] 3D Numerical Simulation and Study of the 94GHz Gyrotron System
Xia, Mengzhong
Yan, Yang
INTERNATIONAL CONFERENCE ON ELECTRONIC AND ELECTRICAL ENGINEERING (CEEE 2014), 2014, : 625 - 632
[30] An ALE Based FE Formulation for the 3D Numerical Simulation of Fineblanking Processes
Manopulo, Niko
Tong, Longchang
Hora, Pavel
NUMIFORM 2010, VOLS 1 AND 2: DEDICATED TO PROFESSOR O. C. ZIENKIEWICZ (1921-2009), 2010, 1252 : 1168 - 1175

← 1 2 3 4 5 →