Numerical analysis of metal hydride tank with phase change material

被引：96
|
作者：
Mellouli, S. [1 ,2 ,3 ]
Ben Khedher, N. [1 ]
Askri, F. [1 ,3 ]
Jemni, A. [1 ]
Ben Nasrallah, S. [1 ]
机构：
[1] Univ Monastir, Natl Sch Engn Monastir, Lab Thermal & Energet Syst Studies LESTE, Monastir, Tunisia
[2] Univ Sousse, High Sch Sci & Technol Hammam Sousse, Sousse, Tunisia
[3] Univ King Khalid, Fac Engn, Dept Mech Engn, Abha, Saudi Arabia
来源：
APPLIED THERMAL ENGINEERING | 2015年 / 90卷
关键词：
Hydrogen storage; Metal hydride; Heat storage; Phase change material (PCM); MASS-TRANSFER; HYDROGEN STORAGE; HEAT-EXCHANGER; ABSORPTION; SIMULATION; KINETICS; PREDICTION; DESIGN;
D O I：
10.1016/j.applthermaleng.2015.07.022
中图分类号：
O414.1 [热力学];
学科分类号：
摘要：
This study discusses the challenges of using heat and hydrogen storage system consisting of a metal hydride tank (MHT) equipped with a phase change material (PCM). A mathematical model was developed to study the bi-dimensional coupled heat and mass transfer inside the hydride bed as well as the PCM domain. The numerical computations have been conducted for two configurations (cylindrical and spherical tanks). Compared to cylindrical tank, the spherical one has the highest MHT-PCM system performance. Additionally, the results have shown that the PCM amount should be carefully optimized. Moreover, the results concerning the impact of MHT-PCM thermal insulation were also discussed. (C) 2015 Elsevier Ltd. All rights reserved.
引用
收藏
页码：674 / 682
页数：9
相关论文
共 50 条
  • [41] Numerical and Experimental Analysis on Inorganic Phase Change Material Usage in Construction
    Muthuvel S.
    Saravanasankar S.
    Sudhakarapandian R.
    Muthukannan M.
    J. Inst. Eng. Ser. A, 4 (231-238): : 231 - 238
  • [42] Numerical investigation of two discharging procedures of a metal hydride-hydrogen storage tank
    Askri, Faouzi
    Bouzgarrou, Fatma
    INTERNATIONAL JOURNAL OF ENERGY RESEARCH, 2021, 45 (05) : 7279 - 7292
  • [43] A hybrid modeling method of metal hydride tank and dynamic characteristic analysis
    Liu, Jiaxuan
    Yang, Fusheng
    Wu, Zhen
    Zhang, Zaoxiao
    INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, 2024, 50 : 799 - 811
  • [44] Experimental and numerical study of a magnesium hydride tank
    Chaise, A.
    de Rango, P.
    Marty, Ph.
    Fruchart, D.
    INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, 2010, 35 (12) : 6311 - 6322
  • [45] Numerical study of thermally optimized metal structures in a Phase Change Material (PCM) enclosure
    Xie Jinlong
    Lee, Hsiao Mun
    Xiang Jianhua
    APPLIED THERMAL ENGINEERING, 2019, 148 (825-837) : 825 - 837
  • [46] Thermal analysis of metal foam matrix composite phase change material
    Xiange Song
    Journal of Thermal Science, 2015, 24 : 386 - 390
  • [47] Thermal Analysis of Metal Foam Matrix Composite Phase Change Material
    Song Xiange
    JOURNAL OF THERMAL SCIENCE, 2015, 24 (04) : 386 - 390
  • [48] Thermal Analysis of Metal Foam Matrix Composite Phase Change Material
    SONG Xiange
    JournalofThermalScience, 2015, 24 (04) : 386 - 390
  • [49] Preparation and performance analysis of metal foam composite phase change material
    Sheng, Qiang
    Xing, Yuming
    Wang, Ze
    Huagong Xuebao/CIESC Journal, 2013, 64 (10): : 3565 - 3570
  • [50] Performance analysis of the phase-change heat-storage tank based on numerical simulation
    Wang, Yaran
    Hou, Juan
    Li, Chengjun
    He, Zhihao
    Zhou, Pengkun
    Zheng, Xuejing
    You, Shijun
    Zhang, Huan
    Li, Ye
    Zhang, Yipeng
    Gao, Wenlong
    APPLIED THERMAL ENGINEERING, 2023, 235
12345