Experimental study of convective heat transfer from in-line cam shaped tube bank in crossflow

被引：63

作者：

Lavasani, Arash Mirabdolah ^{[1
]}

Bayat, Hamidreza ^{[2
]}

Maarefdoost, Taher ^{[2
]}

机构：

[1] Islamic Azad Univ, Cent Tehran Branch, Dept Mech Engn, Tehran, Iran

[2] Islamic Azad Univ, Cent Tehran Branch, Young Researchers & Elite Club, Tehran, Iran

来源：

APPLIED THERMAL ENGINEERING | 2014年 / 65卷 / 1-2期

关键词：

Experimental; Cam shaped; Tube bank; Heat transfer; Crossflow; FORCED-CONVECTION; ELLIPTIC TUBES; PRESSURE-DROP; EXCHANGER; PERFORMANCE; CYLINDERS; OPTIMIZATION; BUNDLES;

D O I：

10.1016/j.applthermaleng.2013.12.078

中图分类号：

O414.1 [热力学];

学科分类号：

摘要：

Heat transfer from cam-shaped tube bank has been studied experimentally. Tubes were mounted in an in-line arrangement with two longitudinal pitch ratios 1.5 and 2. Reynolds number based on equivalent diameter varied in range of 27,000 <= Re-D <= 42,500. Drag coefficient and heat transfer from tubes in second row were obtained. Results show that drag coefficient and heat transfer of cam shaped tubes depend on position of tubes in tube bank. Tubes that located at first and second column have the maximum and minimum value of drag coefficient, respectively. In addition, Heat transfer from subsequent tubes is greater than tube in first column. Thermal hydraulic performance of cam shape tube is about 6 times greater than circular tube with same equivalent diameter. (C) 2014 Elsevier Ltd. All rights reserved.

引用

页码：85 / 93

页数：9

共 50 条

[31] Experimental study on forced convective flow and heat transfer in a concentric annular tube
State Key Lab. of Multiphase Flow in Power Engineering, Xi'an Jiaotong University, Xi'an 710049, China
不详
不详
Huaxue Gongcheng, 2007, 6 (12-15):
[32] Experimental study for forced convective heat transfer with molten salts in a circular tube
Liu, Bin
Wu, Yu-Ting
Ma, Chong-Fang
Zhao, Yao-Hua
Kung Cheng Je Wu Li Hsueh Pao/Journal of Engineering Thermophysics, 2010, 31 (10): : 1739 - 1742
[33] HEAT-TRANSFER AROUND TUBES IN IN-LINE TUBE BANKS
AIBA, S
TSUCHIDA, H
OTA, T
BULLETIN OF THE JSME-JAPAN SOCIETY OF MECHANICAL ENGINEERS, 1982, 25 (204): : 919 - 926
[34] Finite analytic solution of convective heat transfer for tube arrays in crossflow: Part II. Heat transfer analysis
Chen, Ching Jen, 1600, (111):
[35] Finite Analytic Solution of Convective Heat Transfer for Tube Arrays in Crossflow: Part II-Heat Transfer Analysis
Chen, Ching Jen
Wung, Tzong-Shyan
JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME, 1989, 111 (1-4): : 641 - 648
[36] EXPERIMENTAL INVESTIGATION ON HEAT TRANSFER AND PRESSURE DROP CHARACTERISTICS OF AIR FLOW OVER A STAGGERED FLAT TUBE BANK IN CROSSFLOW
Ishak, M.
Tahseen, Tahseen Ahmad
Rahman, Md Mustafizur
INTERNATIONAL JOURNAL OF AUTOMOTIVE AND MECHANICAL ENGINEERING, 2013, 7 : 900 - 911
[37] Convective heat transfer in plane channels with in-line mounted rectangular bars
Valencia, A
Calderón, W
INTERNATIONAL JOURNAL OF NUMERICAL METHODS FOR HEAT & FLUID FLOW, 2004, 14 (07) : 866 - 878
[38] Experimental investigation of in-line tube bundle heat transfer process to vertical downward foam flow
Gylys, J.
Zdankus, T.
Jonynas, R.
Maladauskas, R.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2011, 54 (11-12) : 2326 - 2333
[39] Numerical Investigations of the Convective Heat Transfer from Turbulent Flow Over Staggered Tube Bank
Refaey H.A.
Sultan A.M.
Moawad M.
Abdelrahman M.A.
Journal of The Institution of Engineers (India): Series C, 2019, 100 (06): : 983 - 993
[40] Heat transfer at in-line tube bank under low-frequency asymmetrical impulses impact on fluid flow
Khaibullina, Aigul
Khairullin, Aidar
Sinyavin, Alexey
Ilin, Vladimir
THERMOPHYSICAL BASIS OF ENERGY TECHNOLOGIES, 2014, 76

← 1 2 3 4 5 →