Full-scale, wind tunnel and CFD analysis methods of wind loads on heliostats: A review

被引：23

作者：

Bendjebbas, H. ^{[1
,2
]}

Abdellah-ElHadj, A. ^{[2
]}

Abbas, M. ^{[1
]}

机构：

[1] CDER, UDES, Bou Ismail 42415, W Tipaza, Algeria

[2] Univ Medea, LMP2M, Medea 26000, Algeria

来源：

RENEWABLE & SUSTAINABLE ENERGY REVIEWS | 2016年 / 54卷

关键词：

Heliostat; Wind loads; Analysis methods; INDUCED DYNAMIC-RESPONSE; PHOTOVOLTAIC TRACKERS; NUMERICAL-SIMULATION; RESOURCES; MODEL;

D O I：

10.1016/j.rser.2015.10.031

中图分类号：

X [环境科学、安全科学];

学科分类号：

08 ; 0830 ;

摘要：

Optimum design of isolated units or fields of heliostats is depend upon obtaining realistic design wind loads. These structures may become even more sensitive to wind loads as gravity loads decrease through innovative technology. The presence of the wind affects the stability and the optical performance of the heliostat. Predicting wind loads is very important for developing heliostats with good performance. In this paper, the main analysis methods of wind loads on heliostat are investigated. The use of full-scale, wind tunnel or CFD analysis method is closely related to the parameters studied, the accuracy of results and the financial and material resources available. The comparison of methods shows that each method has its advantages and disadvantages depending on studied cases. (c) 2015 Elsevier Ltd. All rights reserved.

引用

页码：452 / 472

页数：21

共 50 条

[41] WIND-TUNNEL AND FULL-SCALE COMPARISONS OF MEAN WIND FLOW OVER AN ISOLATED LOW HILL
TEUNISSEN, HW
[J]. JOURNAL OF WIND ENGINEERING AND INDUSTRIAL AERODYNAMICS, 1983, 15 (1-3) : 271 - 286
[42] WIND-TUNNEL AND FULL-SCALE COMPARISONS ON THE CHANGE OF LOCAL WIND CHARACTERISTICS DUE TO AN OPEN CUT
UTSUNOMIYA, H
NAGAO, F
YOSHIMURA, S
[J]. JOURNAL OF WIND ENGINEERING AND INDUSTRIAL AERODYNAMICS, 1989, 32 (1-2) : 51 - 61
[43] A full-scale prediction method for wind turbine rotor noise by using wind tunnel test data
Ryi, Jaeha
Choi, Jong-Soo
Lee, Seunghoon
Lee, Soogab
[J]. RENEWABLE ENERGY, 2014, 65 : 257 - 264
[44] DESIGN CODE, FULL-SCALE AND NUMERICAL DATA FOR WIND LOADS ON FREESTANDING WALLS
ROBERTSON, AP
HOXEY, RP
RICHARDS, PJ
[J]. JOURNAL OF WIND ENGINEERING AND INDUSTRIAL AERODYNAMICS, 1995, 57 (2-3) : 203 - 214
[45] Wind Loads on a Passenger/Car Ferry by CFD Computations and Wind Tunnel Tests
Blendermann, Werner
Hellwig, Katrin
Schuckert, Eberhard
[J]. SHIP TECHNOLOGY RESEARCH, 2011, 58 (02) : 82 - 88
[46] Full-scale testing to determine the wind loads on free-standing walls
Robertson, AP
Hoxey, RP
Short, JL
Ferguson, WA
Osmond, S
[J]. JOURNAL OF WIND ENGINEERING AND INDUSTRIAL AERODYNAMICS, 1996, 60 (1-3) : 123 - 137
[47] A review of full-scale structural testing of wind turbine blades
Zhou, H. F.
Dou, H. Y.
Qin, L. Z.
Chen, Y.
Ni, Y. Q.
Ko, J. M.
[J]. RENEWABLE & SUSTAINABLE ENERGY REVIEWS, 2014, 33 : 177 - 187
[48] New FKFS Technology at the Full-Scale Aeroacoustic Wind Tunnel of University of Stuttgart
Blumrich, Reinhard
Widdecke, Nils
Wiedemann, Jochen
Michelbach, Armin
Wittmeier, Felix
Beland, Oliver
[J]. SAE INTERNATIONAL JOURNAL OF PASSENGER CARS-MECHANICAL SYSTEMS, 2015, 8 (01): : 294 - 305
[49] COMPARISON OF WIND-TUNNEL MODEL AND FULL-SCALE SNOW FENCE DRIFTS
IVERSEN, JD
[J]. JOURNAL OF WIND ENGINEERING AND INDUSTRIAL AERODYNAMICS, 1981, 8 (03) : 231 - 249
[50] FULL-SCALE MEASUREMENTS AND WIND-TUNNEL TESTS ON CROSS-VENTILATION
KATAYAMA, T
TSUTSUMI, J
ISHII, A
[J]. JOURNAL OF WIND ENGINEERING AND INDUSTRIAL AERODYNAMICS, 1992, 44 (1-3) : 2553 - 2562

← 1 2 3 4 5 →