Failure mapping of adhesively bonded single lap joints: Nondimensional analysis

被引：1
|
作者：
Tang, J. H. [1 ]
Sridhar, I. [1 ]
Srikanth, N. [1 ]
机构：
[1] Nanyang Technol Univ, Sch Mech & Aerosp Engn, Singapore 639798, Singapore
来源：
ENGINEERING FRACTURE MECHANICS | 2014年 / 121卷
关键词：
Single lap joint; Debonding; Crack kinking; Mixed mode; Tensile loading; ENERGY-RELEASE RATES; CRACK; INTERFACE; FRACTURE; SPECIMENS; STRESS; KINKING;
D O I：
10.1016/j.engfracmech.2014.03.009
中图分类号：
O3 [力学];
学科分类号：
08 ; 0801 ;
摘要：
The debonding problem of single lap joints subjected to in-plane loading is analyzed based on nondimensional approach pioneered by Lai et al. (1996). This approach allows the determination of specific nondimensional energy release rate and prediction of debonding or adherend kinking mapping region. For equal moduli of adherend, the analysis reveals that asymmetrical configuration induces unfavorable conditions of higher debonding and kinking propensity. Compared to the experimental measurements, the analysis presented shows a fairly good agreement of expected failure mode for a given set of geometry and material parameters. The mapping of failure region from the nondimensional analysis is instructive as a design failure map for predicting the fracture behavior of asymmetrical single lap joints. (C) 2014 Elsevier Ltd. All rights reserved.
引用
收藏
页码：116 / 128
页数：13
相关论文
共 50 条
  • [31] Parametric Study of Adhesively Bonded Single Lap Joints by the Taguchi Method
    da Silva, Lucas F. M.
    Critchlow, G. W.
    Figueiredo, M. A. V.
    [J]. JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY, 2008, 22 (13) : 1477 - 1494
  • [32] The effect of recessing on the stresses in adhesively bonded single-lap joints
    Lang, TP
    Mallick, PK
    [J]. INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES, 1999, 19 (04) : 257 - 271
  • [33] Adhesively bonded single lap joints with non-flat interfaces
    Ashrafi, Mahdi
    Ajdari, Amin
    Rahbar, Nima
    Papadopoulos, Jim
    Nayeb-Hashemi, Hamid
    Vaziri, Ashkan
    [J]. INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES, 2012, 32 : 46 - 52
  • [34] Optimization of adhesively-bonded single lap joints by adherend notching
    [J]. Sancaktar, E., 1600, Taylor and Francis Ltd. (14):
  • [35] Optimization of adhesively-bonded single lap joints by adherend notching
    Sancaktar, E
    Simmons, SR
    [J]. JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY, 2000, 14 (11) : 1363 - 1404
  • [36] A NUMERICAL STUDY OF ADHESIVELY BONDED LAP JOINTS
    CHIU, WK
    JONES, R
    [J]. INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES, 1992, 12 (04) : 219 - 225
  • [37] Three dimensional failure analysis and damage propagation behavior of adhesively bonded single lap joints in laminated FRP composites
    Panigrahi, S. K.
    Pradhan, B.
    [J]. JOURNAL OF REINFORCED PLASTICS AND COMPOSITES, 2007, 26 (02) : 183 - 201
  • [38] Adhesion failure propagation in adhesively-bonded single-lap laminated FRP composite joints
    Panigrahi, S. K.
    Pradhan, B.
    [J]. JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY, 2007, 21 (5-6) : 379 - 398
  • [39] Singularity parameter determination in adhesively bonded lap joints for use in failure criteria
    Barroso, A.
    Mantic, V.
    Paris, F.
    [J]. COMPOSITES SCIENCE AND TECHNOLOGY, 2008, 68 (13) : 2671 - 2677
  • [40] The fracture load analysis of different support patches in adhesively bonded single-lap joints
    Demir, Kubra
    Bayramoglu, Simay
    Akpinar, Salih
    [J]. THEORETICAL AND APPLIED FRACTURE MECHANICS, 2020, 108
12345