Failure mapping of adhesively bonded single lap joints: Nondimensional analysis

被引：1
|
作者：
Tang, J. H. [1 ]
Sridhar, I. [1 ]
Srikanth, N. [1 ]
机构：
[1] Nanyang Technol Univ, Sch Mech & Aerosp Engn, Singapore 639798, Singapore
来源：
ENGINEERING FRACTURE MECHANICS | 2014年 / 121卷
关键词：
Single lap joint; Debonding; Crack kinking; Mixed mode; Tensile loading; ENERGY-RELEASE RATES; CRACK; INTERFACE; FRACTURE; SPECIMENS; STRESS; KINKING;
D O I：
10.1016/j.engfracmech.2014.03.009
中图分类号：
O3 [力学];
学科分类号：
08 ; 0801 ;
摘要：
The debonding problem of single lap joints subjected to in-plane loading is analyzed based on nondimensional approach pioneered by Lai et al. (1996). This approach allows the determination of specific nondimensional energy release rate and prediction of debonding or adherend kinking mapping region. For equal moduli of adherend, the analysis reveals that asymmetrical configuration induces unfavorable conditions of higher debonding and kinking propensity. Compared to the experimental measurements, the analysis presented shows a fairly good agreement of expected failure mode for a given set of geometry and material parameters. The mapping of failure region from the nondimensional analysis is instructive as a design failure map for predicting the fracture behavior of asymmetrical single lap joints. (C) 2014 Elsevier Ltd. All rights reserved.
引用
收藏
页码：116 / 128
页数：13
相关论文
共 50 条
  • [1] Static and fatigue failure analysis of adhesively bonded thick composite single lap joints
    Tang, J. H.
    Sridhar, I.
    Srikanth, N.
    [J]. COMPOSITES SCIENCE AND TECHNOLOGY, 2013, 86 : 18 - 25
  • [2] Static and fatigue failure analysis of adhesively bonded thick composite single lap joints
    Tang, J.H.
    Sridhar, I.
    Srikanth, N.
    [J]. Composites Science and Technology, 2013, 86 : 18 - 25
  • [3] Experimental and numerical analysis of single lap adhesively bonded joints
    Raos, Pero
    Matejiček, Franjo
    Lucić, Mirjana
    [J]. Polimeri (Zagreb), 2003, 24 (2-4): : 79 - 83
  • [4] Failure analysis of adhesively bonded single lap joints embedded with metal component as part of fillet
    You, Min
    Zheng, Yong
    Zheng, Xiaoling
    Yan, Zhanmou
    Li, Zhi
    [J]. FRACTURE AND DAMAGE MECHANICS V, PTS 1 AND 2, 2006, 324-325 : 727 - +
  • [5] Failure Analysis of Adhesively Bonded GFRP Single Lap Joints after Cyclic Environmental Loading
    Sakai, Kaori
    Nassar, Sayed A.
    [J]. PROCEEDINGS OF THE AMERICAN SOCIETY FOR COMPOSITES: THIRTIETH TECHNICAL CONFERENCE, 2015, : 2355 - 2367
  • [6] Stress analysis of generally asymmetric single lap adhesively bonded joints
    Lee, J
    Kim, H
    [J]. JOURNAL OF ADHESION, 2005, 81 (05): : 443 - 472
  • [7] Finite Element Analysis of Adhesively Bonded Single-lap Joints
    He, Xiaocong
    [J]. MATERIALS AND MANUFACTURING TECHNOLOGY, PTS 1 AND 2, 2010, 129-131 : 411 - 415
  • [8] The effect of adherend thickness on the failure of adhesively-bonded single-lap joints
    Aydin, MD
    Özel, A
    Temiz, S
    [J]. JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY, 2005, 19 (08) : 705 - 718
  • [9] Progressive Failure Analysis on the Single Lap Bonded Joints
    Turan, Kadir
    Kaman, Mete Onur
    [J]. PAMUKKALE UNIVERSITY JOURNAL OF ENGINEERING SCIENCES-PAMUKKALE UNIVERSITESI MUHENDISLIK BILIMLERI DERGISI, 2010, 16 (03): : 315 - 323
  • [10] Stress analysis of adhesively-bonded lap joints
    Her, SC
    [J]. COMPOSITE STRUCTURES, 1999, 47 (1-4) : 673 - 678
12345