The Design and Implementation of FIR Filter Based on Improved DA Algorithm

FIR filter is widely used in the fields of signal processing with high fidelity. In the design of FIR filter the traditional algorithm such as serial DA algorithm, parallel DA algorithm and combined series and parallel DA algorithm are all not so suitable, which has lots of shortcomings. In this design, we improve the DA algorithm and uses the 4-BAAT method which optimizes the structure of LUT(look-up table) to realize the FIR filter. The process of FIR simple tap coefficients is achieved by the operation of shifting and reversing of symbol bit, which can pick up the speed and save the logic resources. This design adopts the Verilog HDL language, using FDA Tool to determine and quantify the coefficients with the given filter parameters. Then it uses Quartus 118.0 to integrate and wire, and Modelsim to simulate and verify. Compared with the filter achieved by standard DA algorithm, this filter reduces complexity, saves logic resources and picks up the speed besides it has the advantages of good reconfiguration, simple hardware structure and high real-time.