THE INFLUENCE OF MANUAL METAL ARC MULTIPLE REPAIR WELDING OF LONG OPERATED WATERWALL ON THE STRUCTURE AND HARDNESS OF THE HEAT AFFECTED ZONE OF WELDED JOINTS

被引：5
|
作者：
Pikula, J. [1 ]
Lomozik, M. [1 ]
Pfeifer, T. [1 ]
机构：
[1] Inst Welding Gliwice, 16-18 Blogoslawionego Czeslawa Str, PL-44100 Gliwice, Poland
来源：
ARCHIVES OF METALLURGY AND MATERIALS | 2017年 / 62卷 / 01期
关键词：
repair welding; waterwall; manual metal arc welding; power engineering; HAZ;
D O I：
10.1515/amm-2017-0049
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
Welded installations failures of power plants, which are often result from a high degree of wear, requires suitable repairs. In the case of cracks formed in the weld bead of waterwall, weld bead is removed and new welded joint is prepared. However, it is associated with consecutive thermal cycles, which affect properties of heat affected zone of welded joint. This study presents the influence of multiple manual metal arc welding associated with repair activities of long operated waterwall of boiler steel on properties of repair welded joints. The work contains the results of macro and microscopic metallographic examination as well as the results of hardness measurements.
引用
收藏
页码：327 / 333
页数：7
相关论文
共 50 条
  • [31] Prediction and comparison of the dilution and heat affected zone in submerged arc welding (SAW) of low carbon alloy steel joints
    Sailender, Mamunuri
    Suresh, R.
    Reddy, G. Chandramohan
    Venkatesh, Sriram
    MEASUREMENT, 2020, 150
  • [32] STRUCTURE OF WELD METAL AND HEAT-AFFECTED ZONE IN BLANKS WELDED AT INCREASED UPSETTING FORCE
    KOVALCHU.GZ
    WELDING PRODUCTION, 1974, 21 (02): : 47 - 49
  • [33] Optimization of the structure and properties of the heat-affected zone of welded joints in high-strength pipe steels
    Velichko, A.A.
    Orlov, V.V.
    Pazilova, U.A.
    Sulyaguin, R.V.
    Khlusova, E.I.
    Welding International, 2015, 29 (09) : 712 - 717
  • [34] STRUCTURE OF THE WELD METAL AND HEAT-AFFECTED ZONE DURING WELDING IN WATER OF DIFFERENT SALINITY
    SAVICH, IM
    KONONENKO, VY
    GUSACHENKO, AI
    AUTOMATIC WELDING USSR, 1984, 37 (04): : 43 - 45
  • [35] The Influence of the Heat-Affected Zone Mechanical Properties on the Behaviour of the Welding in Transverse Plate-to-Tube Joints
    Lozano, Miguel
    Serrano, Miguel A.
    Lopez-Colina, Carlos
    Gayarre, Fernando L.
    Suarez, Jesus
    MATERIALS, 2018, 11 (02):
  • [36] Effects of multiple post welding normalizations on microstructure and hardness of heat affected zone of ultra-fine grained steel
    Zhang, Guifeng
    Miao, Huixia
    Zhang, Jianxun
    Pei, Yi
    Xiao, Kemin
    Yang, Yongxing
    Hsi-An Chiao Tung Ta Hsueh/Journal of Xi'an Jiaotong University, 2008, 42 (01): : 65 - 69
  • [37] Effect of chemical micro-heterogeneity on the susceptibility to local failure of the metal of the heat-affected zone of welded joints
    Volgodonsk Institute of the South Russian State Technical University, Novocherkassk Polytechnical Institute, Volgodonsk, Russia
    Weld. Int., 2013, 5 (403-406):
  • [38] Influence of cooling rate on the structure of heat affected zone after welding a high manganese steel
    Curiel-Reyna, E
    Herrera, A
    Castaño, VM
    Rodriguez, ME
    MATERIALS AND MANUFACTURING PROCESSES, 2005, 20 (05) : 813 - 822
  • [39] Influence of Heat Input and Preheating on Microstructure and Mechanical Properties of Coarse Grain Heat-Affected Zone of Metal Arc Gas-Welded Pearlitic Rail Steel
    Adnan Raza Khan
    Yu Shengfu
    Hao Wang
    Journal of Materials Engineering and Performance, 2019, 28 : 7676 - 7686
  • [40] Structure and Properties of the Welded Joints of Rolled Austenitic High-Nitrogen Steel Fabricated by Manual Consumable-Electrode Arc Welding
    V. S. Kostina
    M. V. Kostina
    S. O. Muradyan
    A. E. Kudryashov
    Russian Metallurgy (Metally), 2022, 2022 : 770 - 777
12345