Inspection of EUV reticles

This paper presents the results of patterned and unpatterned EUV mask inspections. We will show inspection results related to EUV patterned mask design factors that affect inspection tool sensitivity, in particular, EUV absorber material reflectivity, and EUV buffer layer thickness. We have used a DUV (257nm) inspection system to inspect patterned reticles, and have achieved defect size sensitivities on patterned reticles of approximately 80 nm. We have inspected EUV substrates and blanks with a UV (364mn) tool with a 90nm to a 120 nm PSL sensitivity, respectively, and found that defect density varies markedly, by factors of 10 and more, from sample to sample. We are using this information in an ongoing effort to reduce defect densities in substrates and blanks to the low levels that will be needed for EUV lithography. While DUV tools will likely meet the patterned inspection requirements of the 70 nm node in terms of reticle defect sensitivity, wavelengths shorter than 200 11111 will be required to meet the 50 nm node requirements. This research was sponsored in part by NIST-ATP under KLA-Tencor Cooperative Agreement #70NANB8H44024.