Research on New Architecture for Open CNC System Based on Linux

被引：0
|
作者：
Huang, Q. X. [1 ]
Lin, S. W. [1 ]
机构：
[1] Fuzhou Univ, Coll Mech Engn & Automat, Fuzhou 350002, Peoples R China
来源：
MANUFACTURING AUTOMATION TECHNOLOGY | 2009年 / 392-394卷
关键词：
Open CNC; Soft CNC System; Reconstructable; Architecture;
D O I：
10.4028/www.scientific.net/KEM.392-394.482
中图分类号：
TP [自动化技术、计算机技术];
学科分类号：
0812 ;
摘要：
In accordance with slow running speed in present soft CNC system, which is difficult to be adapted to machining with mass of data at high speed, an open architecture of soft CNC system with high performance is presented, which is based on PC+I/O hardware interface and satisfies the requirement of real time performance in data transmission by use of the fifos of RTAI, of which modules are redundantly designed to make its functions reconstructable, extensible and open by use of the routing technology of soft switch. In this system, functions of fine interpolation and movement control, a small portion of CNC system's functions, are performed by the designed simple I/O hardware interface. It is expected to greatly improve the real-time performance and satisfy the requirement of high running speed in CNC system.
引用
收藏
页码：482 / 486
页数：5
相关论文
共 50 条
  • [31] Open architecture CNC system based on soft-integrated communication
    Meng Boyang
    Li Maoyue
    Liu Xianli
    Wang Lihui
    Liang, Steven Y.
    51ST CIRP CONFERENCE ON MANUFACTURING SYSTEMS, 2018, 72 : 671 - 676
  • [32] An open CNC based integrated measuring, modeling and manufacturing system architecture
    Wang Huabing
    Liu Weijun
    1ST INTERNATIONAL SYMPOSIUM ON DIGITAL MANUFACTURE, VOLS 1-3, 2006, : 238 - 242
  • [33] An open CNC based integrated measuring, modeling and manufacturing system architecture
    Wang, Huabing
    Liu, Weijun
    Wuhan Ligong Daxue Xuebao/Journal of Wuhan University of Technology, 2006, 28 (SUPPL. 1): : 238 - 242
  • [34] New Interpretation Module for Open Architecture Control based CNC Systems
    Yusof, Yusri
    Latif, Kamran
    12TH GLOBAL CONFERENCE ON SUSTAINABLE MANUFACTURING - EMERGING POTENTIALS, 2015, 26 : 729 - 734
  • [35] EDM CNC system based on Linux kernel
    Li, Zhiyong
    Zhao, Wansheng
    Lu, Shanjin
    Song, Yinghui
    Jixie Gongcheng Xuebao/Chinese Journal of Mechanical Engineering, 2003, 39 (11): : 136 - 140
  • [36] The research of an intelligent open CNC system
    Zhang, J
    Wang, LS
    Li, S
    Zhang, FH
    INITIATIVES OF PRECISION ENGINEERING AT THE BEGINNING OF A MILLENNIUM, 2001, : 779 - 783
  • [37] Research on Open CNC System for Rolling Machine Based on PMAC
    Deng, San-peng
    Cao, Chuan-chuan
    Sun, Hong-chang
    Weng, Xi-bin
    FRONTIERS OF MANUFACTURING AND DESIGN SCIENCE IV, PTS 1-5, 2014, 496-500 : 1313 - +
  • [38] Research on multi-robot open architecture of an intelligent CNC system based on parameter-driven technology
    Song, Weike
    Wang, Gang
    Xiao, Juliang
    Wang, Guodong
    Hong, Ying
    ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING, 2012, 28 (03) : 326 - 333
  • [39] Research on the Cross-Octant Strategy for Spatial Curve Interpolation Based on Open-architecture CNC System
    Liu, Youyu
    Han, Jiang
    Zhang, Gouzheng
    Zhu, Huiping
    MECHANICAL AND ELECTRONICS ENGINEERING III, PTS 1-5, 2012, 130-134 : 243 - +
  • [40] Open Architecture of CNC System based on STEP-NC data model
    Wang, Guoxun
    Shu, Qilin
    Wang, Jun
    Wang, Wanshan
    ADVANCES IN MANUFACTURING TECHNOLOGY, PTS 1-4, 2012, 220-223 : 422 - +
12345