Numerical simulations of pressurized elbow under reversed in-plane bending

被引：1
|
作者：
Chen, Xiaohui [1 ]
Chen, Xu [1 ]
机构：
[1] Tianjin Univ, Sch Chem Engn & Technol, Tianjin 300072, Peoples R China
来源：
CURRENT TRENDS IN THE DEVELOPMENT OF INDUSTRY, PTS 1 AND 2 | 2013年 / 785-786卷
关键词：
Pressurized elbow; in-plane bending; Finite element analysis; AbdelKarim-Ohno model; cyclic plasticity; ratcheting strain; MODEL; STATE;
D O I：
10.4028/www.scientific.net/AMR.785-786.16
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The paper compares numerical simulation with experimental results of pressurized elbow piping subjected to reversed in-plane bending in elastoplastic domain. The modified AbdelKarim-Ohno model is implemented into finite element program ANSYS by writing own user subroutine in FORTRAN language. The modified AbdelKarim-Ohno model may improve the prediction accuracy of ratcheting behavior of pressurized elbow under cyclic loading.
引用
收藏
页码：16 / 19
页数：4
相关论文
共 50 条
  • [21] Influence of in-plane restraint on the buckling behaviour of plates under uniform compression, shear and in-plane bending
    Bedair, OK
    COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING, 1997, 148 (1-2) : 1 - 10
  • [22] Elastic J-integral solution for an elbow with axial through-wall crack at crown under in-plane bending
    Prabhakaran, KM
    Raj, VV
    ENGINEERING FRACTURE MECHANICS, 2005, 72 (07) : 1039 - 1047
  • [23] ELASTIC-PLASTIC ANALYSIS OF AN ELBOW WITH AXIAL PART-THROUGH INTERNAL CRACK AT CROWN UNDER IN-PLANE BENDING
    Prabhakaran, K. M.
    Bhate, S. R.
    Bhasin, V.
    Ghosh, A. K.
    PROCEEDINGS OF THE ASME PRESSURE VESSELS AND PIPING CONFERENCE, VOL 3, 2009, : 305 - 312
  • [24] Experimental and numerical investigation of ratcheting behavior in seamless carbon steel 90° elbow pipe with small dimensions under constant internal pressure and in-plane cyclic bending
    Abbasnia, Shahab Kamel
    Shariati, Mahmoud
    INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING, 2023, 204
  • [25] INVESTIGATION OF ULTIMATE BEHAVIOR OF ELBOW PIPES BY TENSILE LOADING TEST IN THE DIRECTION OF IN-PLANE BENDING
    Shimazu, Ryuya
    Sakai, Michiya
    Ono, Yohei
    PROCEEDINGS OF ASME 2023 PRESSURE VESSELS & PIPING CONFERENCE, PVP2023, VOL 7, 2023,
  • [26] DAMAGE PROCESS COMPARED TO THE DESIGN STANDARD OF THE ELBOW SUBJECTED TO IN-PLANE CYCLIC BENDING LOAD
    Nakamura, Izumi
    Otani, Akihito
    Shiratori, Masaki
    PROCEEDINGS OF THE ASME PRESSURE VESSELS AND PIPING CONFERENCE - 2013, VOL 1A: CODES AND STANDARDS, 2014,
  • [27] FINDINGS FROM THE BENCHMARK ANALYSES ON AN ELBOW IN-PLANE BENDING TEST AND A PIPING SYSTEM TEST
    Nakamura, Izumi
    Otani, Akihito
    Shibutani, Tadahiro
    Morishita, Masaki
    Shiratori, Masaki
    PROCEEDINGS OF THE ASME PRESSURE VESSELS AND PIPING CONFERENCE, 2016, VOL 8, 2017,
  • [28] Numerical simulation of ratcheting and fatigue behaviour of mitred pipe bends under in-plane bending and internal pressure
    Li, H.
    Wood, J.
    McCormack, R.
    Hamilton, R.
    INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING, 2013, 101 : 154 - 160
  • [29] Buckling of SSCC composite laminates under in-plane bending load
    Chen, B. (chenbaoxing@comac.cc), 1600, Chinese Society of Astronautics (35):
  • [30] The plastic limit load of elbows under in-plane bending moments
    Duan, Zhixiang
    Shen, Shiming
    Zhou, Lifang
    INTEGRATED APPROACHES FOR MATERIALS AND STRUCTURAL SAFETY, 2007, : 163 - 167
12345