The effect of intermediate annealing between cold rolled steps on crystallographic texture and magnetic properties of Fe-2.6% Si

被引：9
|
作者：
Salih, M. Z. [1 ]
Weidenfeller, B. [3 ]
Al-hamdany, N. [1 ]
Brokmeier, H. -G. [1 ,2 ]
Gan, W. M. [2 ]
机构：
[1] Tech Univ Clausthal, Inst Werkstoffkunde & Werkstofftech, D-38678 Clausthal Zellerfeld, Germany
[2] Helmholtz Zentrum Geesthacht, D-21502 Geesthacht, Germany
[3] Inst Elektrochem, Abteilung Mat Wissensch, D-38678 Clausthal Zellerfeld, Germany
来源：
JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS | 2014年 / 362卷
关键词：
Electrical steel; Hot rolling; Cold rolling; Intermediate annealing; Magnetic property; Neutron diffraction; DIFFRACTOMETER STRESS-SPEC; NEUTRON-DIFFRACTION; AREA-DETECTOR; IRON; RECRYSTALLIZATION; DEFORMATION; SILICON; STEEL;
D O I：
10.1016/j.jmmm.2014.03.009
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The crystallographic textures and magnetic properties of Fe-2.6 wt% Si after two different cold rolling and thermal treatment processes were investigated. The first set of samples was 90% cold rolled and annealed for 20 min at 600 degrees C, 700 degrees C, 900 degrees C and 1100 degrees C, while the second set was cold rolled for 75% and 60% with intermediate annealing at 600 degrees C for 60 min. Samples were analyzed by neutron diffraction and magnetic measurements. By means of the one and two stage cold rolling processes important cube < 0 0 1 >[100] and Goss components {110}< 001 > were produced. Magnetic properties obtained through the two stage process were better than the properties found with the one stage process due to a higher fraction of the cube and Goss components in the material after the two stage process. An increase of grain sizes does not lead to better magnetic properties. (C) 2014 Elsevier B.V. All rights reserved.
引用
收藏
页码：141 / 149
页数：9
相关论文
共 50 条
  • [21] Texture and Microstructure for Magnetic Properties of Two-Stage Cold-Rolled Fe-6.5 Wt Pct Si Thin Sheets
    Yao, Yongchuang
    Sha, Yuhui
    Liu, Jinlong
    Zhang, Fang
    Zuo, Liang
    [J]. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2016, 47A (12): : 5771 - 5776
  • [22] Texture and Microstructure for Magnetic Properties of Two-Stage Cold-Rolled Fe-6.5 Wt Pct Si Thin Sheets
    Yongchuang Yao
    Yuhui Sha
    Jinlong Liu
    Fang Zhang
    Liang Zuo
    [J]. Metallurgical and Materials Transactions A, 2016, 47 : 5771 - 5776
  • [23] Effect of intermediate annealing heating rate on texture and properties of Al-Mg-Si alloy
    Wang, Xiao-Feng
    Guo, Ming-Xing
    Cao, Ling-Yong
    Peng, Xiang-Yang
    Zhang, Ji-Shan
    Zhuang, Lin-Zhong
    [J]. Cailiao Rechuli Xuebao/Transactions of Materials and Heat Treatment, 2015, 36 (07): : 55 - 61
  • [24] Influence of microstructure and texture evolution on magnetic properties attained by annealing of a cold-rolled Fe-Co-10V semi-hard magnetic alloy
    Kamali, M. R.
    Mashreghi, A. R.
    Karjalainen, L. P.
    Hasani, S.
    Javaheri, V
    Komi, J.
    [J]. MATERIALS CHARACTERIZATION, 2020, 169
  • [25] Effect of mechanical milling and annealing on the magnetic properties of the powders Fe and Fe - 6.1% Si
    Kuznetsov, I.A.
    Dorogina, G.A.
    Gorkunov, E.S.
    [J]. Fizika i Khimiya Obrabotki Materialov, 2003, (02): : 11 - 15
  • [26] Effect of annealing temperature on magnetic properties of cold rolled high silicon steel thin sheet
    Liang, Yong Feng
    Ye, F.
    Lin, J. P.
    Wang, Y. L.
    Chen, G. L.
    [J]. JOURNAL OF ALLOYS AND COMPOUNDS, 2010, 491 (1-2) : 268 - 270
  • [27] Factors affecting the strength of P{011}〈566〉-texture after annealing of a cold-rolled Al–Mn–Fe–Si alloy
    K. Huang
    Y. J. Li
    K. Marthinsen
    [J]. Journal of Materials Science, 2015, 50 : 5091 - 5103
  • [28] Influence of annealing treatment on micro/macro-texture and texture dependent magnetic properties in cold rolled FeCo-7.15V alloy
    Hasani, S.
    Shamanian, M.
    Shafyei, A.
    Behjati, P.
    Nezakat, M.
    Fathi-Moghaddam, M.
    Szpunar, J. A.
    [J]. JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS, 2015, 378 : 253 - 260
  • [29] TEXTURE AND PROPERTIES OF COLD-ROLLED POWDER STRIP OF HIGHLY ALLOYED ORDERING FE-SI AND FE-AL ALLOYS
    BEGLOV, VM
    GLEZER, AM
    DERGACH, VV
    SEMENCHINSKII, NM
    SILNIKOVA, EF
    [J]. METAL SCIENCE AND HEAT TREATMENT, 1986, 28 (3-4) : 222 - 224
  • [30] Effect of Annealing on the Microstructure, Texture, and Properties of Cold-Rolled Ti50Ni47Fe3 Shape Memory Alloy Sheets
    Liu, Shuwei
    Song, Xiaoyun
    Li, Yanfeng
    Yu, Yang
    Ye, Wenjun
    Hui, Songxiao
    [J]. CRYSTALS, 2024, 14 (04)
12345