The Effect of Hot-Mounting on the Microstructure of an As-Quenched Auto-Tempered Low-Carbon Martensitic Steel

被引：10

作者：

Babu, Shashank Ramesh ^{[1
]}

Jaskari, Matias ^{[2
]}

Jarvenpaa, Antti ^{[2
]}

Porter, David ^{[1
]}

机构：

[1] Univ Oulu, Mat & Mech Engn, Ctr Adv Steels Res, Oulun 90014, Finland

[2] Univ Oulu, Kerttu Saalasti Inst, Pajatie 5, FI-85500 Nivala, Finland

来源：

METALS | 2019年 / 9卷 / 05期

基金：

欧盟地平线“2020”;

关键词：

hot-mounting; martensite; tempering; quenching; cementite; LATH MARTENSITE; MECHANICAL-PROPERTIES; PRECIPITATION; TOOLS;

D O I：

10.3390/met9050550

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

The effect of hot-mounting for metallographic studies of as-quenched low-carbon martensitic steels has been studied. Hot-mounting is typically carried out at 150-200 degrees C, i.e., a low-temperature tempering regime. Cold- and hot-mounted specimens from an as-quenched low-carbon auto-tempered steel were examined using a scanning electron microscope and their hardness levels were also compared. It was found that hot-mounting causes additional tempering that manifests as the appearance of new precipitates in those regions that are free of auto-tempered cementite. The observations were rationalized using DICTRA simulations to calculate the potential growth of cementite. Hot-mounting was also shown to cause a small but statistically significant increase in the hardness of the martensite.

引用

页数：9

共 50 条

[31] Effect of laser processing on the microstructure of a structural low-carbon steel
Pugacheva N.B.
Trushina E.B.
Antenorova N.P.
Russian Metallurgy (Metally), 2014, 2014 (7) : 569 - 575
[32] TRANSMISSION ELECTRON-MICROSCOPIC OBSERVATION OF IRONPLATED FRACTURE EDGE OF LOW-CARBON TEMPERED AND UNTEMPERED MARTENSITIC STEEL
HAGA, H
MIMURA, H
TRANSACTIONS OF THE JAPAN INSTITUTE OF METALS, 1972, 13 (03): : 155 - &
[33] Effect of hydrogen on evolution of deformation microstructure in low-carbon steel with ferrite microstructure
Okada, Kazuho
Shibata, Akinobu
Gong, Wu
Tsuji, Nobuhiro
ACTA MATERIALIA, 2022, 225
[34] EFFECT OF TRANSFORMATION SUBSTRUCTURE ON MECHANICAL PROPERTIES OF A LOW-CARBON MANGANESE MARTENSITIC STEEL
MARTENSSON, H
METALLURGICAL TRANSACTIONS, 1971, 2 (12): : 3490 - +
[35] The effect of tempering on the mechanical properties of a low-carbon boroncontaining martensitic sheet steel
Säglitz, M.
Krauss, G.
Matlock, K.D.
Niegel, M.
HTM - Haerterei-Technische Mitteilungen, 2009, 64 (03): : 136 - 143
[36] Influence of the microstructure on the corrosion behaviour of low-carbon martensitic stainless steel after tempering treatment
Vignal, V.
Ringeval, S.
Thiebaut, S.
Tabalaiev, K.
Dessolin, C.
Heintz, O.
Herbst, F.
Chassagnon, R.
CORROSION SCIENCE, 2014, 85 : 42 - 51
[37] Effects of Manganese on Microstructure and Work-hardening Behavior of Low-carbon Lath Martensitic Steel
Ueno K.
Fujimura R.
Mitsuhara M.
Hayashi K.
Hiwatashi S.
Takahashi M.
Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan, 2024, 110 (04): : 364 - 375
[38] Microstructure and Mechanical Properties Evaluation of Microalloyed Low-Carbon Reduced Activation Ferritic/Martensitic Steel
Cao, Haibo
Chen, Wei
STEEL RESEARCH INTERNATIONAL, 2023, 94 (05)
[39] Effect of hot rolling temperature on grain size and precipitation hardening in a Ti-microalloyed low-carbon martensitic steel
Han, Y.
Shi, J.
Xu, L.
Cao, W. Q.
Dong, H.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2012, 553 : 192 - 199
[40] EFFECT OF MICROSTRUCTURE ON TENSILE FRACTURE OF QUENCHED AND LIGHTLY TEMPERED HIGH-CARBON AND LOW CHROMIUM STEEL CONTAINING UNDISSOLVED SPHEROIDAL CARBIDES
TOMITA, Y
JOURNAL OF MATERIALS SCIENCE, 1990, 25 (11) : 4745 - 4751

← 1 2 3 4 5 →