Solid oxide fuel cell stacks using extruded honeycomb type elements

被引：47
|
作者：
Wetzko, M [1 ]
Belzner, A [1 ]
Rohr, FJ [1 ]
Harbach, F [1 ]
机构：
[1] ABB Kraftwerke AG, Corp Res, D-69115 Heidelberg, Germany
来源：
JOURNAL OF POWER SOURCES | 1999年 / 83卷 / 1-2期
关键词：
fuel cell; SOFC; honeycomb; extruded honeycomb; demonstrator stack; stack test;
D O I：
10.1016/S0378-7753(99)00289-X
中图分类号：
O64 [物理化学（理论化学）、化学物理学];
学科分类号：
070304 ; 081704 ;
摘要：
A solid oxide fuel cell (SOFC) stack concept is described which comprises "condensed-tubes" like extruded honeycomb sections of ceramic electrolyte (ZrO2-based) and interconnectors of nickel sheet as key elements. According to this concept, well known and extensively tested construction principles can be realised in a low-cost production. The cells are self-supported with in-plane conduction. A demonstrator model stack of five honeycomb elements and six nickel sheet seals/interconnectors was built and operated for 860 h at 1000 degrees C. Volumetric power densities of 160 kW/m(3) were obtained with H-2 vs. air, of close to 200 kW/m(3) with H-2 VS. O-2. (C) 1999 Elsevier Science S.A. All rights reserved.
引用
收藏
页码：148 / 155
页数：8
相关论文
共 50 条
  • [21] Development of honeycomb-type solid oxide fuel cell consisting of LaGaO3 electrolyte
    Zhong, Hao
    Matsumoto, Hiroshige
    Ishihara, Tatsumi
    Toriyama, Akira
    ECO-MATERIALS PROCESSING AND DESIGN VIII, 2007, 544-545 : 969 - +
  • [22] A numerical study of fuel recirculation in ammonia-fueled solid oxide fuel cell stacks
    Rizvandi, Omid Babaie
    Nemati, Arash
    Frandsen, Henrik Lund
    INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, 2024, 53 : 792 - 806
  • [23] Electrical Efficiency of Two-Stage Solid Oxide Fuel Cell Stacks with a Fuel Regenerator
    Nakamura, K.
    Ide, T.
    Kawabata, Y.
    Nakajima, T.
    Dohkoh, T.
    Tsuji, M.
    Akabane, S.
    Hatae, T.
    JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 2020, 167 (11)
  • [24] Probabilistic-Based Design Methodology for Solid Oxide Fuel Cell Stacks
    Sun, X.
    Tartakovsky, A. M.
    Khaleel, M. A.
    JOURNAL OF FUEL CELL SCIENCE AND TECHNOLOGY, 2009, 6 (02): : 0210041 - 02100410
  • [25] Investigations of metallic alloys for use as interconnects in solid oxide fuel cell stacks
    Linderoth, S
    Hendriksen, PV
    Mogensen, M
    Langvad, N
    JOURNAL OF MATERIALS SCIENCE, 1996, 31 (19) : 5077 - 5082
  • [26] Quality Assurance of Solid Oxide Fuel Cell (SOFC) and Electrolyser (SOEC) Stacks
    Lang, M.
    Auer, C.
    Couturier, K.
    Sun, X.
    McPhail, S. J.
    Malkow, T.
    Fu, Q.
    Liu, Q.
    SOLID OXIDE FUEL CELLS 15 (SOFC-XV), 2017, 78 (01): : 2077 - 2086
  • [27] Performance Change of Solid Oxide Fuel Cell Stacks Against Varous Factors
    Kang W.
    Deng Z.
    Song J.
    Liang D.
    Liu S.
    Sun X.
    Luo T.
    Yang X.
    Wang S.
    Kuei Suan Jen Hsueh Pao/Journal of the Chinese Ceramic Society, 2021, 49 (01): : 42 - 48
  • [28] Networked solid oxide fuel cell stacks combined with a gas turbine cycle
    Selimovic, A
    Palsson, J
    JOURNAL OF POWER SOURCES, 2002, 106 (1-2) : 76 - 82
  • [29] A Direct Manufacturing Cost Model for Solid-Oxide Fuel Cell Stacks
    Scataglini, R.
    Wei, M.
    Mayyas, A.
    Chan, S. H.
    Lipman, T.
    Santarelli, M.
    FUEL CELLS, 2017, 17 (06) : 825 - 842
  • [30] Numerical modelling of the micro-tubular solid oxide fuel cell stacks
    Pianko-Oprych, Paulina
    Jaworski, Zdzislaw
    PRZEMYSL CHEMICZNY, 2012, 91 (09): : 1813 - 1815
12345