Effect of contamination on microstructure in friction stir spot welded DP590 steel

被引：56

作者：

Ohashi, R. ^{[1
]}

Fujimoto, M. ^{[1
]}

Mironov, S. ^{[2
]}

Sato, Y. S. ^{[2
]}

Kokawa, H. ^{[2
]}

机构：

[1] Kawasaki Heavy Ind Co Ltd, Mfg Technol Dept, Syst Technol Dev Ctr, Chuo Ku, Kobe, Hyogo 6508670, Japan

[2] Tohoku Univ, Dept Mat Proc, Grad Sch Engn, Aoba Ku, Sendai, Miyagi 9808579, Japan

来源：

SCIENCE AND TECHNOLOGY OF WELDING AND JOINING | 2009年 / 14卷 / 03期

关键词：

Friction stir spot welding; Microstructure; Hardness; Joint strength; DP590; steel;

D O I：

10.1179/136217108X388642

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

In this study, FSSW of DP590 steel was performed using both bare and TiC/TiN coated Si(3)N(4) tool with Ar shielding, and effect of contamination on the microstructure during FSSW was examined. Defect free welds were successfully obtained at all welding conditions. Si, N and O contaminations were clearly found in the weld when bare Si(3)N(4) tool was used without Ar shielding, but the coated tool and Ar shielding could suppress the contaminations. The contaminations caused higher hardness in the vicinity of the pin hole and reduced the weld strength. The present study showed that the prevention of the contaminations could improve the weld strength, especially the cross-tension strength, in FSSW of DP590 steel using Si(3)N(4) tool.

引用

页码：221 / 227

页数：7

共 50 条

[31] Effect of base metal chemical composition on properties of resistance spot welding joint of DP590 steel
Wang, Min
Wu, Yixiong
Pan, Hua
Lei, Ming
[J]. Hanjie Xuebao/Transactions of the China Welding Institution, 2010, 31 (02): : 33 - 35
[32] Study on mechanical properties and microstructure of DP590 steel with different annealing process
Pan, Libo
Lin, Chengjiang
Zhou, Wenqiang
Zuo, Zhijiang
[J]. 2021 5TH INTERNATIONAL CONFERENCE ON ADVANCES IN ENERGY, ENVIRONMENT AND CHEMICAL SCIENCE (AEECS 2021), 2021, 245
[33] Effect of Rotation Speed and Steel Microstructure on Joint Formation in Friction Stir Spot Welding of Al Alloy to DP Steel
Torkamani, Hadi
Vivas Mendez, Javier
Lecart, Clement
Aldanondo Begiristain, Egoitz
Alvarez Moro, Pedro
Antti, Marta-Lena
[J]. JOURNAL OF MANUFACTURING AND MATERIALS PROCESSING, 2022, 6 (01):
[34] Mechanical Properties and Tool Life of Friction-Stir-Welded DP590 Using the Si3N4 Tool
Kim, Young-Gon
Kim, In-Ju
Kim, Ji-Sun
Park, Jae-Hyun
[J]. MATERIALS TRANSACTIONS, 2014, 55 (10) : 1557 - 1563
[35] Effects of multi-pulse tempering on resistance spot welding of DP590 steel
Bin Wang
Lin Hua
Xiaokai Wang
Juanjuan Li
[J]. The International Journal of Advanced Manufacturing Technology, 2016, 86 : 2927 - 2935
[36] Effect of Welding Parameters on the Microstructure and Tensile Properties of Friction Stir-Welded DP600 Steel
Ashrafi, Hamid
Shamanian, M.
Emadi, R.
Sarmadi, M. Ahl
[J]. SAE INTERNATIONAL JOURNAL OF MATERIALS AND MANUFACTURING, 2019, 12 (03) : 165 - 177
[37] Effects of multi-pulse tempering on resistance spot welding of DP590 steel
Wang, Bin
Hua, Lin
Wang, Xiaokai
Li, Juanjuan
[J]. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2016, 86 (9-12): : 2927 - 2935
[38] Spot weldability comparison of high strength steel DP590 with different chemical composition
LIU Xingquan
[J]. Baosteel Technical Research, 2010, 4(S1) (S1) : 54 - 54
[39] Investigations on Mechanical Behaviour and Failure Mechanism of Resistance Spot-Welded DP590 Steel Using Artificial Neural Network
Rao, Shravan Singh
Arora, Kanwer Singh
Sharma, Lochan
Chhibber, Rahul
[J]. TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2021, 74 (06) : 1419 - 1438
[40] Investigations on Mechanical Behaviour and Failure Mechanism of Resistance Spot-Welded DP590 Steel Using Artificial Neural Network
Shravan Singh Rao
Kanwer Singh Arora
Lochan Sharma
Rahul Chhibber
[J]. Transactions of the Indian Institute of Metals, 2021, 74 : 1419 - 1438

← 1 2 3 4 5 →