Use of a hybrid filter in a basic oxygen steel plant.

被引:0
|
作者
Kaskas, AA
Hotz, R
Rasim, WA
机构
[1] KRUPP HOESCH STAHL AG,ABT UMWELTSCHUTZ,DORTMUND,GERMANY
[2] KRUPP HOESCH STAHL AG,WERK PHOENIX,ABT GWTS,DORTMUND,GERMANY
来源
STAHL UND EISEN | 1996年 / 116卷 / 11期
关键词
D O I
暂无
中图分类号
TF [冶金工业];
学科分类号
0806 ;
摘要
Objective. The basic oxygen steel plant of Krupp Hoesch Stahl AG in Dortmund-Horde has a primary and a secondary off-gas collection and dedusting system. The secondary dedusting system has been modernised to improve the level of pollution control. It is the first time that ''hybrid filter'' technology has been used in this respect in a steel plant of this magnitude. Documented in the following are the results that have been achieved. Summary. The hybrid filter differs from wet-type electrostatic precipitators in that only the dust collecting electrodes are continually wet with a film of running water. If an adequate distribution of water and an almost identical pressure ratio on both sides of the flexible collecting electrodes are ensured, then the new filter system fulfills the requirements in hand better than conventional equipment of this type. It has been possible, for example, to reduce the residual dust content in the cleaned gas by an average of 70%. Furthermore, within the scope of the structural and technical measures, the noise level has been decreased and the diffuse fuse dust emissions lessened by an increased volumetric now rate during extraction. It has also been possible to reduce the number of safety-related filter shutdowns from once or twice per day to approximately once per month.
引用
收藏
页码:105 / &
页数:6
相关论文
共 50 条
  • [21] SPECIFIC CONTROL MEASURES AT THE WATER TREATMENT PLANT OF TPP AT BOKARO STEEL PLANT.
    Bishnoi, Y.P.S.
    Sinha, A.P.
    Journal of the Institution of Engineers (India): Chemical Engineering Division, 1986, 66 : 15 - 18
  • [22] Application of Ladles Lined with Dolomite in a Large Electric Steel Plant.
    Ameling, Dieter
    Walden, Klaus
    Wethkamp, Heiner
    1981, 101 (15): : 35 - 39
  • [23] LOW CYCLE FATIGUE BEHAVIOR OF STEEL IN USE FOR HIGH-PRESSURE BOILER DRUMS IN POWER PLANT.
    Wang, Jinrui
    Li, Yimin
    Zai, Yaozhong
    Zhongguo Dianji Gongcheng Xuebao/Proceedings of the Chinese Society of Electrical Engineering, 1987, 8 (02): : 1 - 10
  • [24] PROCESS CONTROL SYSTEM IN ENERGY CENTER OF STEEL MAKING PLANT.
    Fujiwara, Satoshi
    Ando, Nobuhiko
    Ohya, Kazuhiro
    Fuji Electric Review, 1981, 27 (03): : 94 - 105
  • [25] CALIBRATION AND EVALUATION OF DISSOLVED OXYGEN SENSORS IN AN ACTIVATED SLUDGE PLANT.
    Speirs, G.
    Chapman, D.
    Luxon, E.
    Matthews, J.
    Water pollution research journal of Canada, 1982, 17 : 117 - 133
  • [26] Improvements in water treatment at the basic oxygen steelmaking plant at British Steel Teesside Works
    Roche, MJ
    TOTAL QUALITY MANAGEMENT, 1997, 8 (2-3): : S262 - S263
  • [27] Combined Use of Ozone and BAC in a Large Treatment Plant.
    Bablon, G.
    Ventresque, C.
    Damez, F.
    Water Supply, 1986, 4 (04): : 35 - 45
  • [28] Ladle furnace automation at the Vitkovice basic oxygen steel plant and electric melt shop
    Arnreiter, D
    Muller, J
    Minar, M
    STAHL UND EISEN, 1997, 117 (04): : 85 - 89
  • [29] USE THE VOLUME/METHOD MATRIX TO DEFINE YOUR PLANT.
    Connor, Susan
    Thompson, Olin
    Process Engineering (London), 1987, 68 (03):
  • [30] Use of a mathematical model with a view to optimizing the SMB plant.
    Theoleyre, MA
    ABSTRACTS OF PAPERS OF THE AMERICAN CHEMICAL SOCIETY, 1996, 211 : 192 - IEC