On the Improvement of Temperature Uniformity and Energy Efficiency by Auxiliary Ducts for Cooling Air in a Semi-Low Temperature Warehouse

被引:0
|
作者
Yun, Hyeon [1 ]
Kim, Joon Hyun [2 ]
Sung, Jaeyong [3 ]
机构
[1] Seoul Natl Univ Sci & Technol, Grad Sch, Seoul, South Korea
[2] Seoul Natl Univ Sci & Technol, NDT Ctr, Seoul, South Korea
[3] Seoul Natl Univ Sci & Technol, Dept Mech & Automot Engn, Seoul, South Korea
关键词
Semi-low Temperature Warehouse; Auxiliary Duct; Temperature Uniformity; Energy Efficiency; Porosity; CFD;
D O I
10.3795/KSME-B.2020.44.5.313
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
In this study, the improvement of temperature uniformity and energy efficiency was investigated by installing auxiliary ducts connected to a unit cooler in a low-temperature warehouse for long-term cold storage of cabbage. Based on the empirical data for the refrigeration system of a real storage, numerical simulations were conducted for the 3D unsteady flows inside the storage. Then, the distributions of temperature and velocity fields were compared according to the presence of the duct and the porosity of the duct slit. The results show that at the lower the porosity of the duct slit, the larger the space in the warehouse that remains in the proper temperature band owing to the heat balance during one cooling operation cycle. The auxiliary duct leads to the effective circulation of cooling flows; hence, the temperature uniformity improves and the consumption of cooling energy decreases when the duct is installed.
引用
收藏
页码:313 / 323
页数:11
相关论文
共 50 条
  • [41] The Improvement of Energy Efficiency by Increasing Steam Temperature in Combined Cycle Power Generation
    Jang, Jae-Yel
    Jung, Jin Do
    Journal of Institute of Control, Robotics and Systems, 2024, 30 (05) : 572 - 579
  • [42] Improvement of Positioning Accuracy of Magnetostrictive Actuator by Means of Built-in Air Cooling and Temperature Control
    Kwak, Yong-Kil
    Kim, Sun-Ho
    Ahn, Jung-Hwan
    INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING, 2011, 12 (05): : 829 - 834
  • [43] Energy-Efficiency Improvement Potential of Electric Vehicles Considering Transmission Temperature
    Wei, C.
    Hofman, T.
    Caarls, E. Ilhan
    van Iperen, R.
    IFAC PAPERSONLINE, 2019, 52 (15): : 211 - 216
  • [44] A comparative review on the application of radiant low-temperature heating and high-temperature cooling for energy, thermal comfort, indoor air quality, design and control
    Hesaraki, Arefeh
    Huda, Nazmul
    SUSTAINABLE ENERGY TECHNOLOGIES AND ASSESSMENTS, 2022, 49
  • [45] Low Temperature Thermal Energy Storage for Passive Cooling using Lauryl Alcohol
    Bukhari, Syed Shahzor Raza
    Ali, Majid
    Waqas, Adeel
    2019 3RD INTERNATIONAL CONFERENCE ON ENERGY CONSERVATION AND EFFICIENCY (ICECE), 2019, : 23 - 27
  • [46] An experimental assessment on semi-low temperature combustion using waste oil biodiesel/C3-C5 alcohol blends in a diesel engine
    Atmanli, Alpaslan
    Yilmaz, Nadir
    FUEL, 2020, 260
  • [47] Assessing the energy efficiency of a low temperature refrigerating system with indirect methods
    Hudjetz, Stefan
    Pfeifferm, Daniel
    Becker, Martin
    15TH IIR-GUSTAV LORENTZEN CONFERENCE ON NATURAL REFRIGERANTS, 2022, : 179 - 186
  • [48] LOW-TEMPERATURE ENERGY EFFICIENCY OF LITHIUM-ION BATTERIES
    Nazari, Ashkan
    Esmaeeli, Roja
    Hashemi, Seyed Reza
    Aliniagerdroudbari, Haniph
    Farhad, Siamak
    PROCEEDINGS OF THE ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION, 2018, VOL 6A, 2019,
  • [49] Microwave-assisted freeze drying: The role of power input and temperature control on energy efficiency and uniformity
    Kalinke, Isabel
    Roeder, Johanna
    Unterbuchberger, Guenther
    Kulozik, Ulrich
    JOURNAL OF FOOD ENGINEERING, 2025, 390
  • [50] Determination of Electrical and Efficiency Parameters of Air Cooling of Low-Temperature PEM Fuel Cell Stack with Power of 5kW
    Razniak, Andrzej
    Dudek, Magdalena
    Siwek, Tomasz
    Dudek, Piotr
    Kalawa, Wojciech
    PRZEGLAD ELEKTROTECHNICZNY, 2018, 94 (04): : 140 - 147