Line edge roughness investigation on chemically amplified resist materials with masked helium ion beam lithography

被引：12

作者：

Eder-Kapl, S

Loeschner, H

Zeininger, M

Fallmann, W

Kirch, O

Patsis, GP

Constantoudis, V

Gogolides, E

机构：

[1] IMS Nanofabricat GmbH, A-1020 Vienna, Austria

[2] Vienna Tech Univ, Inst Ind Elektron & Mat Wissensch, A-1040 Vienna, Austria

[3] Infineon Technol AG, MP TI TD PMT, D-91050 Erlangen, Germany

[4] NCSR Demokritos, IMEL, GR-15310 Athens, Greece

来源：

MICROELECTRONIC ENGINEERING | 2004年 / 73-4卷

关键词：

line edge roughness; shot noise; analysis of variance; scaling analysis; ion beam lithography;

D O I：

10.1016/j.mee.2004.02.049

中图分类号：

TM [电工技术]; TN [电子技术、通信技术];

学科分类号：

0808 ; 0809 ;

摘要：

We conducted line edge roughness (LER) measurements on resists with various sensitivities, exposed with a 75 keV 1:1 masked ion beam lithography tool. The critical dimension measurement data were treated with an algorithm for separation of mask induced roughness from random LER. The scaling analysis approach provided the correlation length and the roughness exponent. The results indicate that for exposure doses >2.5 muC/cm(2) LER is not governed by shot noise but by the resist material properties (sensitivity, molecular weight, acid diffusion length) and development conditions. (C) 2004 Elsevier B.V. All rights reserved.

引用

页码：252 / 258

页数：7

共 50 条

[1] A study of line edge roughness in chemically amplified resist for low energy electron-beam lithography
Nakasugi, T
Ando, A
Inanami, R
Sasaki, N
Sugihara, K
[J]. MICROPROCESSES AND NANOTECHNOLOGY 2001, DIGEST OF PAPERS, 2001, : 302 - 303
[2] Proton and anion distribution and line edge roughness of chemically amplified electron beam resist
Kozawa, T
Yamamoto, H
Saeki, A
Tagawa, S
[J]. JOURNAL OF VACUUM SCIENCE & TECHNOLOGY B, 2005, 23 (06): : 2716 - 2720
[3] Analysis of dissolution factor of line edge roughness formation in chemically amplified electron beam resist
Kozawa, Takahiro
[J]. JAPANESE JOURNAL OF APPLIED PHYSICS, 2018, 57 (12)
[4] Resist thickness dependence of line width roughness of chemically amplified resists used for electron beam lithography
Maeda, Naoki
Konda, Akihiro
Okamoto, Kazumasa
Kozawa, Takahiro
Tamura, Takao
[J]. JAPANESE JOURNAL OF APPLIED PHYSICS, 2020, 59 (08)
[5] Line edge roughness in chemically amplified resist: Speculation, simulation and application
Nishimura, Y
Michaelson, TB
Meiring, JE
Stewart, MD
Willson, CG
[J]. JOURNAL OF PHOTOPOLYMER SCIENCE AND TECHNOLOGY, 2005, 18 (04) : 457 - 465
[6] Correlation between proton. dynamics and line edge roughness in chemically amplified resist for post-optical lithography
Saeki, Akinori
Kozawa, Takahiro
Tagawa, Seiichi
Cao, Heidi B.
[J]. JOURNAL OF VACUUM SCIENCE & TECHNOLOGY B, 2006, 24 (06): : 3066 - 3072
[7] Monte Carlo simulation on line edge roughness after development in chemically amplified resist of post-optical lithography
Saeki, Akinori
Kozawa, Takahiro
Tagawa, Seiichi
Cao, Heidi B.
Deng, Hai
Leeson, Michael J.
[J]. ADVANCES IN RESIST MATERIALS AND PROCESSING TECHNOLOGY XXV, PTS 1 AND 2, 2008, 6923
[8] Relationship between Line Edge Roughness and Fluctuation of Acid Concentration in Chemically Amplified Resist
Kozawa, Takahiro
Yamamoto, Hiroki
Tagawa, Seiichi
[J]. JAPANESE JOURNAL OF APPLIED PHYSICS, 2010, 49 (09)
[9] Edge roughness study of chemically amplified resist in low-energy electron-beam lithography using computer simulation
Nakasugi, T
Ando, A
Inanami, R
Sasaki, N
Sugihara, K
Miyoshi, M
Fujioka, H
[J]. JAPANESE JOURNAL OF APPLIED PHYSICS PART 1-REGULAR PAPERS SHORT NOTES & REVIEW PAPERS, 2002, 41 (6B): : 4157 - 4162
[10] Effects of acid diffusion and resist molecular size on line edge roughness for chemically amplified resists in EUV lithography: computational study
Koyama, Masanori
Imai, Kyohei
Shirai, Masamitsu
Hirai, Yoshihiko
Yasuda, Masaaki
[J]. JAPANESE JOURNAL OF APPLIED PHYSICS, 2021, 60 (10)

← 1 2 3 4 5 →