Machinability of Hard Martensitic Stainless Steel and Hard Alloy Steel by CBN and PCBN Tools by Turning Process

被引：0

作者：

Thamizhmanii, S. ^{[1
]}

Hasan, S. ^{[1
]}

机构：

[1] Tun Hussein Onn Univ Malaysia, Fac Mech & Mfg Engn, Batu Pahat 86400, Johor, Malaysia

来源：

WORLD CONGRESS ON ENGINEERING, WCE 2011, VOL I | 2011年

关键词：

Machining; Martensitic stainless steel; Surface roughness; Cutting force; Specific cutting pressure; Flank wear; SPEED; WEAR;

D O I：

暂无

中图分类号：

TP301 [理论、方法];

学科分类号：

081202 ;

摘要：

Hard turning of martensitic stainless steel is gaining importance in all manufacturing sectors like automobile and aerospace industries. Machinability of materials depends on surface roughness, tool wear, cutting forces, specific cutting pressure and work material hardness. In this research hard martensitic stainless steel AISI 440 C and SCM 440 alloy steel was used as work materials. CBN and PCBN cutting tools were used to turn the work materials. The operating parameters used were cutting velocity 100, 125, 150, 175 and 200 m/min with feed rate of 0.10, 0.20 and 0.30 mm/rev with constant depth of cut of 1.0 mm. The length of turning was 150 mm and 750 mm. Machinability of both materials and tools was evaluated in terms of roughness, flank wear, cutting force and specific cutting pressure.

引用

页码：554 / 559

页数：6

共 50 条

[31] Cutting temperature effect on PCBN and CVD coated carbide tools in hard turning of D2 tool steel
Dosbaeva, G. K.
El Hakim, M. A.
Shalaby, M. A.
Krzanowski, J. E.
Veldhuis, S. C.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2015, 50 : 1 - 8
[32] Experimental study on hard turning hardened GCr15 steel with PCBN tool
Liu, XL
Wen, DH
Li, ZJ
Xiao, L
Yan, FG
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2002, 129 (1-3) : 217 - 221
[33] Experimental Study on Hard Turning Hardened GCr15 Steel with PCBN Tool
LIU Xian-li 1
2. Dept. of Precision Instrunments & Mechano logy
厦门大学学报(自然科学版), 2002, (S1) : 125 - 126
[34] Comparison Research on the Machinability of Hardened Steel when Dry Turning with Ceramic and CBN Cutting Tools
Tu, Chunjuan
Guo, Xuhong
Wang, Wei
Wang, Chihong
ADVANCES IN MECHATRONICS TECHNOLOGY, 2011, 43 : 573 - 577
[35] Prediction of machining performance using RSM and ANN models in hard turning of martensitic stainless steel AISI 420
Zerti, Abderrahmen
Yallese, Mohamed Athmane
Zerti, Oussama
Nouioua, Mourad
Khettabi, Riad
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 2019, 233 (13) : 4439 - 4462
[36] Application of CBN cutting tools in hard turning and tool wear
Zhao, Haidong
An, Libao
Yang, Peiqing
Geng, Ye
MATERIAL DESIGN, PROCESSING AND APPLICATIONS, PARTS 1-4, 2013, 690-693 : 2022 - 2025
[37] Wear characteristics in turning high hardness alloy steel by ceramic and CBN tools
Department of Mechanical Engineering, Huafan University, Shihtin, Taipei, Taiwan
不详
J Mater Process Technol, 1 (114-121):
[38] Improvement of tool utilization when hard turning with cBN tools at varying process parameters
Gutnichenko, O.
Nilsson, M.
Lindvall, R.
Bushlya, V.
Andersson, M.
WEAR, 2021, 477
[39] Cutting tools characteristics and coating depositions for hard part turning of AISI 4340 martensitic steel: A review study
Bag, Rabinarayan
Panda, Amlana
Sahoo, Ashok Kumar
Kumar, Ramanuj
MATERIALS TODAY-PROCEEDINGS, 2020, 26 : 2073 - 2078
[40] An investigation of heat partition and tool wear in hard turning of H13 tool steel with CBN cutting tools
Ghani, Mohammad Usman
Abukhshim, Nuri A.
Sheikh, M. A.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2008, 39 (9-10): : 874 - 888

← 1 2 3 4 5 →