THE INFLUENCES OF TILLAGE TOOLS CUTTING EDGE WEAR ON THE DRAFT

被引：0
|
作者：
Fechete-Tutunaru, L. V. [1 ]
Ros, V. [1 ]
Gheres, M. [1 ]
机构：
[1] Tech Univ Cluj Napoca, Dept Rd Vehicles & Agr Engn, Cluj Napoca, Romania
来源：
ACTUAL TASKS ON AGRICULTURAL ENGINEERING, PROCEEDINGS | 2009年 / 37卷
关键词：
Tillage tools; wear; cutting edge; draft; SOIL;
D O I：
暂无
中图分类号：
S2 [农业工程];
学科分类号：
0828 ;
摘要：
To evaluate the influence of tillage tools wear on draft, a series of soil bin test have been made using simple tools. The tools geometry was modelled through systemic analysis of soil-tool interaction in order to reveal the cutting edge influence. Along with several operating parameters, the tests results shoved the influence of each factor and pair factors over tillage tools draft. The procedure: was used to evaluate and predict the tillage tools durability and, it also call be developed and applied to different tools according to systemic analysis method.
引用
收藏
页码：143 / 152
页数：10
相关论文
共 50 条
  • [41] WEAR OF CUTTING TOOLS AND THE METHODS OF ITS DECREASE
    SAIDOV, MG
    ISMAILOVA, F
    MUSALLIFOV, Z
    IZVESTIYA AKADEMII NAUK AZERBAIDZHANSKOI SSR SERIYA FIZIKO-TEKHNICHESKIKH I MATEMATICHESKIKH NAUK, 1983, 4 (04): : 167 - 171
  • [42] Wear and tool life of CBN cutting tools
    Mamalis, AG
    Kundrák, J
    Horváth, M
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2002, 20 (07): : 475 - 479
  • [43] OXIDATION AND WEAR BEHAVIOR OF CARBIDE CUTTING TOOLS
    SHAN, HS
    PANDEY, PC
    WEAR, 1976, 37 (01) : 69 - 75
  • [44] Wear Reduction in Cutting and Forming Tools.
    Cornely, Hans
    Werkstatt und Betrieb, 1980, 113 (04): : 273 - 276
  • [45] Transitions in wear mechanisms of alumina cutting tools
    Goh, GKL
    Lim, LC
    Rahman, M
    Lim, SC
    WEAR, 1996, 201 (1-2) : 199 - 208
  • [46] WEAR OF TURNING TOOLS WITH VARYING CUTTING PARAMETERS
    JEMIELNIAK, K
    SZAFARCZYK, M
    SZEWCZYK, W
    ZAWISTOWSKI, J
    MECHANIK MIESIECZNIK NAUKOWO-TECHNICZNY, 1983, 56 (01): : 21 - 24
  • [47] MEASUREMENT AND PROPAGATION OF FLANK WEAR IN CUTTING TOOLS
    TSENG, MM
    NOUJAIM, RA
    JOURNAL OF ENGINEERING FOR INDUSTRY-TRANSACTIONS OF THE ASME, 1979, 101 (02): : 109 - 115
  • [48] A STUDY OF WEAR ON CEMENTED CARBIDE CUTTING TOOLS
    HSU, TC
    JOURNAL OF ENGINEERING FOR INDUSTRY, 1969, 91 (03): : 652 - &
  • [49] A STUDY OF WEAR ON CEMENTED CARBIDE CUTTING TOOLS
    HSU, TC
    MECHANICAL ENGINEERING, 1969, 91 (05) : 102 - &
  • [50] Wear and Tool Life of CBN Cutting Tools
    A.G. Mamalis
    J. Kundrák
    M. Horváth
    The International Journal of Advanced Manufacturing Technology, 2002, 20 : 475 - 479
12345