PRODUCTION OF ABSORBER MATERIAL PELLETS BY QUASI-ISOSTATIC PRESSING IN GRAPHITE POWDER

被引：0

作者：

Krasnorutskyy, V. S. ^{[1
]}

Sayenko, S. Yu. ^{[1
]}

Belash, N. N. ^{[1
]}

Surkov, A. Ye. ^{[1
]}

Chernov, I. A. ^{[1
]}

Matyushchenko, R. V. ^{[1
]}

Rybalchenko, N. D. ^{[1
]}

Belkin, F. V. ^{[1
]}

机构：

[1] Kharkov Phys Tech Inst, Ctr Nat Sci, Kharkov, Ukraine

来源：

PROBLEMS OF ATOMIC SCIENCE AND TECHNOLOGY | 2009年 / 02期

关键词：

D O I：

暂无

中图分类号：

O57 [原子核物理学、高能物理学];

学科分类号：

070202 ;

摘要：

There are presented the results of investigations into the effect of quasi-isostatic hot pressing conditions in elastically compressible medium on the properties of pellets made of advanced absorber materials, such as: B(4)C-20,0 wt% HfB(2), HfB(2), and dysprosium titanate. The hot pressing conditions that ensure producing high-density pellets with good physical-mechanical properties have been determined. The results of investigation of structure and phase composition are presented.

引用

页码：85 / 89

页数：5

共 50 条

[41] Model of Quasi-Isostatic Hot Pressing of SHS Products in the System Titanium ― Carbon ― Nickel. Part 2. Results of Modelling and Experimental Studies
Alexander F. Fedotov
Powder Metallurgy and Metal Ceramics, 2002, 41 : 7 - 12
[42] A low-cost granular-medium hot quasi-isostatic pressing method for enhancing compressive properties of 3D printed structures
Wang, Kui
Tan, Qianbing
Wang, Jin
Liu, Yisen
Zhai, Zhanyu
Yao, Song
Peng, Yong
JOURNAL OF MANUFACTURING PROCESSES, 2024, 115 : 441 - 451
[43] The model of quasi-isostatic hot pressing for SPS products in titanium-carbon-nickel system. II. The results of simulation and experimental study
Fedorov, A.F.
Amosov, A.P.
Poroshkovaya Metallurgiya, 2002, (1-2): : 8 - 14
[44] Achieving injection molding interlayer strength via powder assisted hot isostatic pressing in material extrusion polyetheretherketone
Wu, Weidong
Xin, Junzhe
Hu, Bin
Chen, Rong
Huang, Dengfeng
Huang, Zhongxin
Feng, Jiangtao
Du, Chun
Shan, Bin
ADDITIVE MANUFACTURING, 2023, 74
[45] Production of fully dense (α2+γ) TiAl by reactive hot isostatic pressing (RHIP) of an elemental powder mixture
Neves, F
Marcelo, T
Carvalho, MH
DEVELOPMENT IN LIGHT METALS: SCIENCE, TECHNOLOGY AND APPLICATION, 2000, 188 : 27 - 35
[46] Surface pick-up of argon during hot isostatic pressing of material built by laser powder bed fusion
Strandh, Emil
Mellin, Pelle
Dubiez-Le Goff, Sophie
Gardstam, Johannes
Ahlfors, Magnus
Strondl, Annika
ADDITIVE MANUFACTURING, 2021, 38
[47] PRODUCTION OF AN IMPERMEABLE COMPOSITE OF IRRADIATED GRAPHITE AND GLASS BY HOT ISOSTATIC PRESSING AS A LONG TERM LEACH RESISTANT WASTE FORM
Fachinger, Johannes
Mueller, Walter
Marsat, Eric
Grosse, Karl-Heinz
Seemann, Richard
Scales, Charlie
Banford, Anthony
Easton, Michael Mark
ASME 2013 15TH INTERNATIONAL CONFERENCE ON ENVIRONMENTAL REMEDIATION AND RADIOACTIVE WASTE MANAGEMENT, VOL 1: LOW/INTERMEDIATE-LEVEL RADIOACTIVE WASTE MANAGEMENT; SPENT FUEL, FISSILE MATERIAL, TRANSURANIC AND HIGH-LEVEL RADIOACTIVE WASTE MANAGEMENT, 2013,
[48] Insights into the Conductive Network of Electrochemical Exfoliation with Graphite Powder as Starting Raw Material for Graphene Production
Mei, Jing
Qiu, Zhian
Gao, Teng
Wu, Qiang
Zheng, Fenghua
Jiang, Juantao
Liu, Kui
Huang, Youguo
Wang, Hongqiang
Li, Qingyu
LANGMUIR, 2023, 39 (12) : 4413 - 4426
[49] Production scale processing of a new intermetallic NiAl-Ta-Cr alloy for high-temperature application - Part II. Powder metallurgical production of bolts by hot isostatic pressing
Palm, M
Preuhs, J
Sauthoff, G
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2003, 136 (1-3) : 114 - 119
[50] Coupling hot isostatic pressing and laser powder bed fusion: A new strategy to manufacture defect-free CuCrZr-316L steel multi-material structures
Deillon, L.
Beldarrain, N. Abando
Li, X.
Bambach, M.
MATERIALS & DESIGN, 2024, 241

← 1 2 3 4 5 →