Rapid and three-dimensional nanoimprint template fabrication technology using focused ion beam lithography

被引：39
|
作者：
Taniguchi, Jun
Koga, Kentaro
Kogo, Yasuo
Miyamoto, Iwao
机构：
[1] Tokyo Univ Sci, Dept Appl Elect, Noda, Chiba 2788510, Japan
[2] Tokyo Univ Sci, Dept Mat Sci & Technol, Noda, Chiba 2788510, Japan
来源：
MICROELECTRONIC ENGINEERING | 2006年 / 83卷 / 4-9期
关键词：
three-dimensional nanoimprint template; focused ion beam lithography; spin-on-glass; PMMA;
D O I：
10.1016/j.mee.2006.01.101
中图分类号：
TM [电工技术]; TN [电子技术、通信技术];
学科分类号：
0808 ; 0809 ;
摘要：
The characteristics of focused ion beam (FIB) lithography for spin-on-glass (SOG) and PMMA resists were investigated. These resists have high sensitivity around 1 mu C/cm(2) and their depth gradations were obtained by using less than 1 mu C/cm(2). In particular, FIB lithography working with SOG resists can be used for speedy fabrication of three-dimensional (3D) nanoimprint template. Furthermore, this combination of FIB and SOG has the potential for alternative to EB cutting which is the next generation media mastering technique. Using fabricated SOG template, U-V-nanoimprint lithography was carried out and replicated pattern with 59.8 nm gap was obtained. (c) 2006 Elsevier B.V. All rights reserved.
引用
收藏
页码：940 / 943
页数：4
相关论文
共 50 条
  • [1] Three-Dimensional Nanomolds Fabrication for Nanoimprint Lithography
    Deng, Jia
    Zhou, Huimin
    Dong, Jingyan
    Cohen, Paul
    47TH SME NORTH AMERICAN MANUFACTURING RESEARCH CONFERENCE (NAMRC 47), 2019, 34 : 228 - 232
  • [2] Three-dimensional nanoimprint mold fabrication by focused-ion-beam chemical vapor deposition
    Morita, T
    Watanabe, K
    Kometani, R
    Kanda, K
    Haruyama, Y
    Kaito, T
    Fujita, JI
    Ishida, M
    Ochiai, Y
    Tajima, T
    Matsui, S
    JAPANESE JOURNAL OF APPLIED PHYSICS PART 1-REGULAR PAPERS SHORT NOTES & REVIEW PAPERS, 2003, 42 (6B): : 3874 - 3876
  • [3] Fabrication of a three-dimensional nanoimprint mold by using electron beam lithography with consideration of the proximity effect
    Unno, N.
    Taniguchi, J.
    SECOND INTERNATIONAL SYMPOSIUM ON ATOMIC TECHNOLOGY, 2008, 106
  • [4] Fabrication of complex three-dimensional nanostructures using focused ion beam and nanomanipulation
    Jeon, Jangbae
    Floresca, Herman Carlo
    Kim, M. J.
    JOURNAL OF VACUUM SCIENCE & TECHNOLOGY B, 2010, 28 (03): : 549 - 553
  • [5] Fabrication of three-dimensional nanostructures by focused ion beam milling
    Tjerkstra, R. W.
    Segerink, F. B.
    Kelly, J. J.
    Vos, W. L.
    JOURNAL OF VACUUM SCIENCE & TECHNOLOGY B, 2008, 26 (03): : 973 - 977
  • [6] Fabrication of three-dimensional nanoimprint mold using inorganic resist in low accelerating voltage electron beam lithography
    Ishii, Yoshiaki
    Taniguchi, Jun
    MICROELECTRONIC ENGINEERING, 2007, 84 (5-8) : 912 - 915
  • [7] Nanoscale Fabrication of a Three-Dimensional Stack of Graphene Layers Using a Focused Ion Beam
    Venugopal, Gunasekaran
    Kim, Sang-Jae
    JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY, 2011, 11 (07) : 5909 - 5914
  • [8] Three-dimensional nanostructures by focused ion beam techniques: Fabrication and characterization
    Wuxia Li
    Changzhi Gu
    Ajuan Cui
    J.C. Fenton
    Qianqing Jiang
    P.A. Warburton
    Tiehan H. Shen
    Journal of Materials Research, 2013, 28 : 3063 - 3078
  • [9] Three-dimensional nanostructures by focused ion beam techniques: Fabrication and characterization
    Li, Wuxia
    Gu, Changzhi
    Cui, Ajuan
    Fenton, J. C.
    Jiang, Qianqing
    Warburton, P. A.
    Shen, Tiehan H.
    JOURNAL OF MATERIALS RESEARCH, 2013, 28 (22) : 3063 - 3078
  • [10] Three-dimensional nanoimprint lithography using photocurable resins
    Taniguchi, J.
    Unno, N.
    Kamiya, Y.
    Sakai, N.
    Ohsaki, T.
    PLASTICS RUBBER AND COMPOSITES, 2010, 39 (07) : 327 - 331
12345