Modeling of containment atmosphere mixing and stratification experiment using a CFD approach

An experiment on containment atmosphere mixing and stratification, which was originally performed in the TOSQAN facility in Saclay (France), was simulated with the Computational Fluid Dynamics code CFX4.4. The TOSQAN facility consists of a large cylindrical vessel in which gases are injected. In the considered experiment, steam, air and helium were injected during different phases of the experiment, with steam condensing on some parts of the vessel walls. During certain phases, steady states were obtained when the steam condensation rate became equal to the steam injection rate, with all boundary conditions remaining constant. In the present work, three such intermediate steady states were simulated independently. The essential purpose was to reproduce the non-homogeneous structure of the vessel atmosphere, given that condensation is simulated in such a way to obtain the proper condensation rate. A two-dimensional axisymmetric model of the TOSQAN vessel for the CFX4.4 code was developed. The flow in the simulation domain was modeled as single-phase. Steam condensation on vessel walls was modeled as a sink of mass and energy. Calculated profiles of temperature, steam concentration, and velocity components are compared to experimental results and discussed. The comparison suggests that atmosphere mixing and stratification in an NPP containment at accident conditions could be successfully simulated using the proposed CFD approach. (c) 2006 Elsevier B.V. All rights reserved.