Hydrogen desorption mechanism of 2NaBH4 + MgH2 composite prepared by high-energy ball milling

被引:70
|
作者
Garroni, S. [1 ]
Pistidda, C. [2 ]
Brunelli, M. [3 ]
Vaughan, G. B. M. [3 ]
Surinach, S. [1 ]
Baro, M. D. [1 ]
机构
[1] Univ Autonoma Barcelona, Dept Fis, Bellaterra 08193, Spain
[2] Forschungszentrum Karlsruhe, Inst Nanotechnol, D-76021 Karlsruhe, Germany
[3] European Synchrotron Radiat Facil, F-38043 Grenoble, France
关键词
Mechanical milling; Scanning electron microscopy (SEM); Synchrotron radiation; X-ray diffraction (XRD); Hydrogen storage; MAGNESIUM; HYDRIDE; STORAGE; MGB2;
D O I
10.1016/j.scriptamat.2009.02.059
中图分类号
TB3 [工程材料学];
学科分类号
0805 ; 080502 ;
摘要
The desorption mechanism of 2NaBH(4) + MgH2 Composite has been investigated. The results show that the chemical interaction between MgH2 and NaBH4 is capable of decreasing the dehydrogenation temperature with respect to the single compounds. The dehydriding reaction starts at around 320 degrees C with the desorption of the MgH2 to Mg and proceeds via the chemical dismutation of NaBH4 in NaH and an intermediate specie. In situ synchrotron X-ray powder diffraction indicates that MgB2 is one of the final reaction products. (C) 2009 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.
引用
收藏
页码:1129 / 1132
页数:4
相关论文
共 50 条
  • [31] Hydrogen Desorption Properties of MgH2
    Malahayati, M.
    Yufita, Evi
    Ismail, I.
    Mursal, M.
    Idroes, Rinaldi
    Jalil, Zulkarnain
    [J]. BULLETIN OF CHEMICAL REACTION ENGINEERING AND CATALYSIS, 2021, 16 (02): : 280 - 285
  • [32] Hydrogen desorption from ball milled MgH2 catalyzed with Fe
    A. Bassetti
    E. Bonetti
    L. Pasquini
    A. Montone
    J. Grbovic
    M. Vittori Antisari
    [J]. The European Physical Journal B - Condensed Matter and Complex Systems, 2005, 43 : 19 - 27
  • [33] Nanostructured MgH2 Obtained by Cold Rolling Combined with Short-time High-energy Ball Milling
    Floriano, Ricardo
    Leiva, Daniel Rodrigo
    Deledda, Stefano
    Hauback, Bjorn Christian
    Botta, Walter Jose
    [J]. MATERIALS RESEARCH-IBERO-AMERICAN JOURNAL OF MATERIALS, 2013, 16 (01): : 158 - 163
  • [34] The effect of ball milling under hydrogen and argon on the desorption properties of MgH2 covered with a layer of Mg(OH)2
    Varin, R. A.
    Jang, M.
    Czujko, T.
    Wronski, Z. S.
    [J]. JOURNAL OF ALLOYS AND COMPOUNDS, 2010, 493 (1-2) : L29 - L32
  • [35] Hydrogen sorption properties of MgH2/NaBH4 composites
    Kurko, Sandra
    Aurora, Annalisa
    Gattia, Daniele Mirabile
    Contini, Vittoria
    Montone, Amelia
    Raskovic-Lovre, Zeljka
    Novakovic, Jasmina Grbovic
    [J]. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, 2013, 38 (27) : 12140 - 12145
  • [36] NaBH4 regeneration from NaBO2 by high-energy ball milling and its plausible mechanism
    Lang, Chengguang
    Jia, Yi
    Liu, Jiangwen
    Wang, Hui
    Ouyang, Liuzhang
    Zhu, Min
    Yao, Xiangdong
    [J]. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, 2017, 42 (18) : 13127 - 13135
  • [37] Experimental Evidence of Na2[B12H12] and Na Formation in the Desorption Pathway of the 2NaBH4 + MgH2 System
    Garroni, Sebastiano
    Milanese, Chiara
    Pottmaier, Daphiny
    Mulas, Gabriele
    Nolis, Pau
    Girella, Alessandro
    Caputo, Riccarda
    Olid, David
    Teixdor, Francesc
    Baricco, Marcello
    Marini, Amedeo
    Surinach, Santiago
    Dolors Baro, M.
    [J]. JOURNAL OF PHYSICAL CHEMISTRY C, 2011, 115 (33): : 16664 - 16671
  • [38] Hydrogen storage properties of MgH2-diatomite composites obtained by high-energy ball milling
    Milovanovic, S.
    Matovic, L.
    Drvendzija, M.
    Novakovic, J. G.
    [J]. JOURNAL OF MICROSCOPY, 2008, 232 (03) : 522 - 525
  • [39] Effect of LiH on the fast hydrolysis and hydrogen generation of MgH2 by ball milling
    Qiu, Hongwei
    Han, Xingbo
    Zang, Shuyan
    Liu, Wei
    Yang, Guo
    Lv, Lijun
    Wang, Xiaofeng
    Duan, Jiaqi
    Wang, Shuangyu
    [J]. NEW JOURNAL OF CHEMISTRY, 2022, 46 (41) : 19900 - 19908
  • [40] Composite behaviour of MgH2 and complex hydride mixtures synthesized by ball milling
    Czujko, T.
    Zaranski, Z.
    Malka, I. E.
    Wronski, Z.
    [J]. JOURNAL OF ALLOYS AND COMPOUNDS, 2011, 509 : S604 - S607